References
- Han, J. C., Dutta, S. and Ekkad, S. V., 2000, “Gas Turbine Heat Transfer and Cooling Technology”, Taylor & Francis, New York.
- Belen'kiy, M. Y., Gotovskiy, M. A., Lekakh, B. M., Fokin. B. S. and Dolgushin. K. S., 1993 “Heat Transfer Augmentation Using Surfaces Formed by a System of Spherical Cavities,” UDC 539.1.08, Heat Transfer Research, Bol. 25, No. 2, pp. 196-203.
- Moon, H. K., O'Connel, T. and Glezer, B., 2000, “Channel Height Effect on Heat Transfer and Friction in a Dimpled Passage,” American Society of Mechanical Engineers (ASME), International Gas Turbine and Aeroengine Congress and Exhibition, Indianapolis, Indiana, 99-GT-163.
- Mahmood, G. I., Hill, M. L., Nelson, D. L. and Ligrani, P. M., 2000, “Local Heat Transfer and Flow Structure on and above a Dimpled Surface in a Channel,” American Society of Mechanical Engineers (ASME), Proceedings of ASME TURBO EXPO 2000, Munich, Germany, 2000- GT-230.
- Moon, S. W. and Lau, S. C., 2002, “Turbulent Heat Transfer Measurements on a Wall with Concave and Cylidrical Dimples in a Square Channel,” American Society of Mechanical Engineers (ASME), Proceedings of ASME TURBO EXPO 2002, Amsterdam, Neterlands, GT-2002-30208. https://doi.org/10.1115/GT2002-30208
- Griffith, T. S., Luai Al-Hadhrami, and Han, J. C., 2002, “Heat Transfer in Rotating Rectangular Cooling Channels(AR=4) with Dimples,” American Society of Mechanical Engineers (ASME), Proceedings of ASME TURBO EXPO 2002, Amsterdam, Neterlands, GT-2002-30220. https://doi.org/10.1115/GT2002-30220
- Mahmood, G. I. and Ligrani, P. I., 2002, “Heat Transfer in a Dimpled Channel: Combined Influences of Aspect Ratio, Temperature Ratio, \Reynolds Number, and Flow Structure,” Elsevier Science Ltd, International Jouranl of Heat and Mass Transfer, vol.45, pp. 2011-2020. https://doi.org/10.1016/S0017-9310(01)00314-3
- Wang, Z., Yeo, K. S. and Khoo, B. C., 2003, “Numerical Simulation of Laminar Channel Flow over Dimpled Surface,” 16th AIAA Computational Fluid Dynamics Conference 23-26 June 2003, Orlando, Florida, AIAA 2003-3964, pp. 1-11.
- Burgees, N. K. and Nigrani, P. M., 2004 “Effects of Dimple Depth on Nusselt Numbers and Friction Factors for Internal Cooling in a Channel,” American Society of Mechanical Engineers (ASME), Proceedings of ASME TURBO EXPO 2004, Vienna, Austria, GT-2004-54232. https://doi.org/10.1115/GT2004-54232
- Khalatov, A., Byerley, A., Ochoa, D. and Min, S. K., 2004, “Flow Characteristics within and Downstream of Spherical and Cylindrical Dimple on a Flat Plate at Low Reynolds 2004 Power for land, Sea, and Air, June 14-17, Vienna, Austria, GT2004-53656, pp. 1-6 https://doi.org/10.1115/GT2004-53656
- Ligrani, P. M., Burgess, N. K. and Won, S. Y., 2004, “Nusselt Numbers and Flow Structure on and above a Shallow Dimpled Surface Within a channel Including Effects of Inlet Turbulence Intensity Level,” Proceedings of ASME Turbo Expo 2004 Power for Land, Sea, and Air June 14-17, Vienna, Austria, GT2004-54231, pp. 1-13. https://doi.org/10.1115/GT2004-54231
- Shin, S., Lee, K. S., Park, S. D. and Kwak, J. S., 2009, “Measurement of the heat transfer coefficient in the dimpled channel: effects of dimple arrangement and channel height,” Journal of Mechanical Science and Technology, 23 pp. 624-630. https://doi.org/10.1007/s12206-008-1211-1
- F. P. Incropera and D. P. DeWitt, 2001, Heat and mass transfer, 5th edition, John Wiley & Sons, INC.
- S. Wagner, M. Kotulla, P. Ott, B. Weigand, and V. von Wolfersdorf, 2005, “The transient liquid crystal technique: Influence of surface curvature and finite wall thickness”, Jounal of Turbomachinery, 127 pp. 175-182 https://doi.org/10.1115/1.1811089
- Moffat. R. J, 1988, “Describing the Uncertainties in Experimental Results”. Journal of Experimental Thermal and Fluid Science, 1, pp. 3-17. https://doi.org/10.1016/0894-1777(88)90043-X