조명전기설비학회논문지 (Journal of the Korean Institute of Illuminating and Electrical Installation Engineers)

  • 제24권6호
  • /
  • Pages.35-42
  • /
  • 2010
  • /
  • 1229-4691(pISSN)
  • /
  • 2287-5034(eISSN)
한국조명전기설비학회 (The Korean Institute of IIIuminating and Electrical Installation Engineers)
권호 표지
DOI QR코드

DOI QR Code

등각사상방법을 이용한 도체로 보강된 결합 도파 선로의 정전기장과 전위 분포 해석

Analysis of Electrostatic Field and Potential Distributions in Conductor-Backed Coupled Coplanar Waveguide Using Conformal Mapping Method

  • 유태훈 (동양미래대학 정보통신과) ;
  • 한기수 (동양미래대학 전기시스템과)
  • 투고 : 2009.12.24
  • 심사 : 2010.02.04
  • 발행 : 2010.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문에서는 등각사상 방법(conformal mapping method)을 사용하여 도체로 보강된 결합 도파 선로(conductor-backed coupled coplanar waveguide)의 정전기장 분포와 전위 분포를 계산하는 해석적인 수식을 유도하였다. 그리고 유도한 수식을 사용하여 결합 도파 선로 구조 전체에 분포하는 정전기장과 전위분포를 계산하고 이를 분석하였다. 논문에서 사용한 방법은 반복계산 과정을 필요로 하지 않으므로 이를 사용하면 전파해석방법(full-wave analysis method)보다 전기장분포를 빠르고 간편하게 계산할 수 있다. 이 방법은 결합기, 필터, 마이크로스트립 안테나와 같은 결합선로를 사용한 마이크로파집적회로의 분석에 폭넓게 응용될 수 있다.

We use conformal mapping method to derive the analytical expressions for calculating electrostatic fields and electric potentials surrounding the conductor-backed coupled coplanar waveguide(CBCCPW) structure. Using the derived expressions, the electrostatic fields and potentials are computed at various points of the CBCCPW's geometry and the field and potential distributions are analyzed. The proposed method provides a faster and simpler calculation of the field distributions than the full-wave analysis method because no iterations are required. This method can be widely applied to the analysis of microwave integrated circuits using coupled line, such as coupler, filter, and microstrip antenna.

키워드

참고문헌

  1. K.C. Gupta, R. Garg, I. Bahl, and P. Bhartia, MicrostripLines and Slotlines, 2nd ed., Artech House, 1996.
  2. T. Itoh, “Overview of Quasi-Planar Transmission Lines,” IEEE Trans. Microwave Theory Tech., vol. MTT-37, pp. 275-280, Feb. 1989. https://doi.org/10.1109/22.20052
  3. G. C. Liang, Y. W. Liu, and K. K. Mei, “Full-Wave Analysis of Coplanar Waveguide and Slotline Using the Time-Domain Finite-Difference Method,” IEEE Trans. Microwave Theory Tech., vol. MTT-37, pp. 1949-1957, Dec. 1989. https://doi.org/10.1109/22.44107
  4. Y. C. Shih, and T. Itoh, “Analysis of Conductor-BackedCoplanar Waveguide,” Electron. Lett., vol. 18, no. 12, pp.538-540, June. 1982. https://doi.org/10.1049/el:19820365
  5. C. Shih, R. B. Wu, S. K. Jeng, and C. H. Chen, “A Full-Wave Analysis of Microstrip Lines by Variational Conformal Mapping Technique,” IEEE Trans. Microwave Theory Tech., vol. MTT-36, pp. 576-581, Mar. 1988. https://doi.org/10.1109/22.3551
  6. C. N. Chang, Y. C. Wong, and C. H. Chen, “Full-Wave Analysis of Coplanar Waveguides by Variational Conformal Mapping Technique,” IEEE Trans. Microwave Theory Tech., vol. MTT-38, pp. 1339-1343, Sept. 1990. https://doi.org/10.1109/22.58662
  7. K. K. M. Cheng, and J. K. A. Everard, “A New Technique for the Quasi-TEM Analysis for Conductor-Backed Coplanar Waveguide Structures,” IEEE Trans. Microwave Theory Tech., vol. MTT-41, pp. 1589-1592, Sept. 1993. https://doi.org/10.1109/22.245682
  8. Dietrich Marcuse, “Electrostatic Field of Coplanar Lines Computed with the Point Matching Method,” IEEE Journal of Quantum Electronics, vol. 25, No. 5, pp. 939-947, May 1989. https://doi.org/10.1109/3.27984
  9. T. Hatsuda, “Computation of coplanar-type strip-line characteristics by relaxation method and application to microwave circuits,” IEEE Trans. Microwave Theory Tech., vol. MTT-23, no. 10, pp. 795-802, Oct. 1975.
  10. Cheng P. Wen, “Coplanar Waveguide: A Surface Strip Transmission Line suitable for Nonreciprocal Gyromagnetic Device Applications,” IEEE Trans. Microwave Theory Tech., vol. MTT-17, pp. 1087-1090, Dec. 1969.
  11. G. Ghione and C. U. Naldi, “Coplanar Waveguides for MMIC Applications: Effect of Upper Shielding, Conductor Backing, Finite-Extent Ground Planes, and Line-to-Line Coupling,” IEEE Trans. Microwave Theory Tech., vol. MTT-35, no. 3, pp. 260-267, Mar. 1987.
  12. G. Ghione, and C. U. Naldi, “Parameters of Coplanar Waveguides with Lower Ground Plane,” Electron. Lett., vol. 19, no. 18, pp. 734-735, Sept. 1983. https://doi.org/10.1049/el:19830500
  13. S. S. Bedair, and I. Wolff, “Fast, Accurate and Simple Approximate Analytic Formulas for Calculating the Parameters of Supported Coplanar Waveguides for (M)MIC's,” IEEE Trans. Microwave Theory Tech., vol. MTT-40, pp. 41-48, Jan. 1992. https://doi.org/10.1109/22.108321
  14. 이재웅, 유태훈, 홍익표, 박한규, “Conformal Mapping 방법을 이용한 도체접지를 가진 동일평면 도파관 결합선로의 해석”, 한국통신학회지, 24(3), pp. 479-485, Mar 1999.
  15. M. Goano, F. Bertazzi, P. Caravelli, G. Ghione, and T. A. Driscoll, “A General Conformal-Mapping Approach to the Optimum Electrode Design of Coplanar Waveguides With Arbitrary Cross Section,” IEEE Trans. Microwave Theory Tech., vol. MTT-49, pp. 1573-1580, Sep. 2001. https://doi.org/10.1109/22.942569
  16. S. Ramo and J.R. Whinnery, Fields and Waves in Modern Radio, 2nd ed. John Wiley & Sons Inc., 1964.