Tribology and Lubricants

Korean Tribology Society (한국트라이볼로지학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of the Ti-series Coating on the Friction and Wear Characteristics of SCM415 Steel

Ti-계 코팅이 SCM415강의 마찰.마모 특성에 미치는 영향

  • Jang, Jeong-Hwan (School of Mechanical & Aerospace Eng., Graduate School Gyeongsang National University) ;
  • Tak, Sung-Hoon (School of Mechanical & Aerospace Eng., Graduate School Gyeongsang National University) ;
  • Zhang, Qi (School of Mechanical & Aerospace Eng., Graduate School Gyeongsang National University) ;
  • Xu, Zhezhu (School of Mechanical & Aerospace Eng., Graduate School Gyeongsang National University) ;
  • Lyu, Sung-Ki (School of Mechanical & Aerospace Eng., Gyeongsang University, ReCAPT(K-MEM R&D Cluster))
  • 장정환 (경상대학교 대학원 기계항공공학부) ;
  • 탁성훈 (경상대학교 대학원 기계항공공학부) ;
  • 장기 (경상대학교 대학원 기계항공공학부) ;
  • 허철수 (경상대학교 대학원 기계항공공학부) ;
  • 류성기 (경상대학교 항공기부품기술연구소)
  • Received : 2010.01.28
  • Accepted : 2010.04.15
  • Published : 2010.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study is to show the friction and wear characteristics on the vapor deposited Tiseries coating layers on the SCM415 steel. In this research, frictional wear characteristic of coating materials such as TiN, TiCN, TiAlN was investigated under room temperature, normal air pressure and dry lubricating condition. Therefore this study carried out research on the friction coefficient, micro hardness(Hv), roughness, SEM on the vapor deposited coating layers on the SCM415 steel.

Keywords

References

  1. Sture Hogmark and Per Hedenqvist, "Tribology Characterization of Thin, Hard Coatings," Proceedings of the 6th nordic on tribology, Vol. 3, pp. 735-747, 1994.
  2. M. G. Hocking, V. Vasantasree, and P. S. Sidky, "Metallic and Ceramic Coatings," Long man scientific & technical, New York, 1989.
  3. 김창근, "플라즈마 용사 기술의 새로운 이해," 기계와 재료, 4-1, pp. 84-93, 1992.
  4. E. Lugscheider, "Plasma Spraying for Wear Applications," Proceeding of the national thermal spray conference, pp. 14-17, 1987.
  5. J. Takeuchi, H. Nakahira, and J. Nagai, "Physical Properties of Some Oxide Coatings by Low Pressure Plasma Spraying," 2nd plasma-technique symposium, Vol. 2, pp. 141-151, 1991.
  6. S. K. Lyu, K. J. Jung, and L. Lu, "A Study on the Influence of Ceramic Coating on Characteristics of Friction and Abrasion of Aluminum Alloy(7075 T6) used in Mechanical Casting," Journal of the Korean Society of safety, Vol. 18, No. 3, pp. 14-21, 2003.
  7. R&B Technical note, 2005.
  8. I. H. Sung, H. G. Han, and H. S. Kong, "Study on the Frictional Characteristics of Micro-particles for Tribological Application," Journal of the KSTLE, Vol. 25, No. 2, pp. 81-85, 2009.