References
- G. Lee, J. H. Jeong, S.-J. Yoon, and D.-H. Choi, “Discrete design approach for light guide panel in back light unit to improve the optical performances of liquid crystal display,” in Proc. 8th World Congress on Structural and Multidisciplinary Optimization (Lisbon, Portugal, June 2009), pp. 1-6.
- J. Choi, K.-S. Hahn, H. Seo, and S.-C. Kim, “Design, analysis, and optimization of LCD backlight unit using ray tracing simulation,” in Proc. ICCSA 2004 (Perugia, Italy, 2004), pp. 837-846.
- G. Lee, J. H. Jeong, S.-J. Yoon, and D.-H. Choi, “Design optimization for optical patterns in a light-guide panel to improve illuminance and uniformity of the liquid-crystal display,” Opt. Eng. 48, 024001 (2009) https://doi.org/10.1117/1.3083290
- Y. C. Kim, S. J. Ahn, S. Ahn, T.-S. Oh, H.-S. Kim, and D.-W. Kim, “Output characteristics of a LGP for TFT-LCD with pyramid shaped pattern,” J. of the Korea Academia-Industrial Cooreration Soc. 10, 3080-3086 (2009). https://doi.org/10.5762/KAIS.2009.10.11.3080
- K. Choi, J.-S. Lee, S. H. Song, C.-H. Oh, and P.-S. Kim, “Micro-patterning of light guide panel in a LCD-BLU by using on silicon crystals,” Hankook Kwanghak Hoeji (Korean J. Opt. Photon.) 16, 113-120 (2005). https://doi.org/10.3807/KJOP.2005.16.2.113
- S. K. Kim, Y. E. Yoo, Y. H. Seo, T.-J. Jae, K.-H. Whang, and D.-S. Choi, “Fabrication of Ni stamper based on micro-pyramid structures for high uniformity light guide panel (LGP),” J. of the Korea Soc. for Precision Eng. 23, 174-178 (2006).
- J. D. Plummer, M. D. Deal, and P. B. Griffin, Silicon VLSI Technology: Fundamentals, Practice, and Modeling (Prentice Hall, Upper Saddle River, NJ, USA, 2000), p. 618.
- Y. C. Kim, “LGP output characteristics depending in BLU pattern size,” Hankook Kwanghak Hoeji (Korean J. Opt. Photon.) 19, 43-47 (2008). https://doi.org/10.3807/HKH.2008.19.1.043
Cited by
- Simulation of Luminance and Uniformity of LGP According to the Laser Scattering Pattern vol.21, pp.6, 2010, https://doi.org/10.3807/KJOP.2010.21.6.225
- Fabrication and Characterization of Film Type Light Guide Plates by UV Imprint Lithography vol.49, pp.2, 2016, https://doi.org/10.5695/JKISE.2016.49.2.178
- Optical characteristics of LGP depending on the scattering pattern orientation for flat-type LED lighting vol.23, pp.2, 2016, https://doi.org/10.1007/s10043-016-0193-y
- Design and Fabrication of a Light-Guiding Plate for a Photobioreactor Utilizing a Hybrid LED Plus Sunlight Source vol.27, pp.2, 2016, https://doi.org/10.3807/KJOP.2016.27.2.073
- LGP pattern design with single LED light source vol.125, pp.3, 2014, https://doi.org/10.1016/j.ijleo.2013.08.021
- Improvement of luminance and uniformity of light guide panel using scatterer pattern by laser processing vol.44, pp.5, 2012, https://doi.org/10.1016/j.optlastec.2011.12.040
- Optimize pattern design for the thin LGP vol.124, pp.15, 2013, https://doi.org/10.1016/j.ijleo.2012.06.070
- Design and Fabrication of Light Guiding Plate for Photobioreactor vol.23, pp.2, 2012, https://doi.org/10.3807/KJOP.2012.23.2.055