DOI QR코드

DOI QR Code

Optimal design of escape vent for the dome type coonstrip shrimp (Pandalus hypsinotus) pot

반구형 도화새우통발에 있어서 적정 탈출구의 설계

  • Kim, Seong-Hun (Fisheries System Engineering Division, NFRDI) ;
  • Lee, Ju-Hee (Division of Marine Production System Management, Pukyong National University) ;
  • Kim, Hyung-Seok (Division of Marine Production System Management, Pukyong National University) ;
  • Park, Seong-Wook (Fisheries System Engineering Division, NFRDI)
  • 김성훈 (국립수산과학원 시스템공학과) ;
  • 이주희 (부경대학교 해양생산시스템관리학부) ;
  • 김형석 (부경대학교 해양생산시스템관리학부) ;
  • 박성욱 (국립수산과학원 시스템공학과)
  • Received : 2010.03.19
  • Accepted : 2010.05.04
  • Published : 2010.05.31

Abstract

In order to design the optimal escape vent for the coon strip shrimp pot, the tank experiments were conducted with the model pot of five different slit height and slit width, respectively. The optimal height and width of escape vent were determined to 20mm and 40mm by tank experiments, respectively. These were determined by the 50% selection carapace length which was denoted to 25mm in selectivity curve. The escape experiments were conducted to determine a number of escape vent with the original shrimp pot to be set the designed escape vent from 2 vents to 10 vents increasing at intervals of 2 vents in tank. The optimal number of escape vents denoted 8 vents. Therefore, to apply the escape vent in commercial shrimp pot will be efficient to reduce small size shrimps to catch.

Keywords

References

  1. Bain, J.Jr., 1967. Investigations into the effectiveness of escape gaps in crayfish traps. New Zealand Marine Department of Fisheries Tech. Rept. 17, Wellington, New Zealand, pp. 20.
  2. Crous, H.B., 1976. A comparison of the efficiency of escape gaps and deck grid sorters for the selection of legal-sized rock lobsters, Jasuslalandii. Fish. Bull. S. Africa, 8, 5-12.
  3. Everson, A.R., R.A. Skillman and J.J Polovina, 1992. Evaluation of rectangular and circular escape vents in the northwestern Hawaii Islands lobster fishery. N. Amer. J. Fish. Manag., 12, 161-171. https://doi.org/10.1577/1548-8675(1992)012<0161:EORACE>2.3.CO;2
  4. Fogarty, M.J. and D.V.D. Borden, 1980. Effects of trap venting on gear selectivity in the inshore island American lobster, Homarus americanus fishery. Fish. Bull., 77, 925-933.
  5. Fujimori, Y., and T. Tokai, 2001. Estimation of gillnet selectivity curve by maximum likelihood method. Fisheries Sciences, 67, 644-654. https://doi.org/10.1046/j.1444-2906.2001.00301.x
  6. High, W.L., 1976. Escape of dungeness crabs from pots. Mar. Fish. Rev., 38, 18-23.
  7. Kim, S.H., J.H. Lee and H.S. Kim, 2008. Size selectivity by alter the slope length and angle of coonstripe shrimp (Pandalus hypsinotus) pot using in Hokkaido, Japan. J. Kore. Soc. Fish. Tech., 44 (4), 273-281. https://doi.org/10.3796/KSFT.2008.44.4.273
  8. Krouse, J.S., 1978. Effectiveness of escape vent shape in traps for catching legal-sized lobster, Homarus americanus, and harvestable-sized crabs, Cancer borealis and Cancer irroratus. Fish. Bull., 76, 425-432.
  9. Li, Y., 2003. Studies on the optimum design of fish traps for catching arabesque greenling (pleurogrammus azonus) used in matsumae, Hokkaido. Ph.D. Thesis, Hokkaido University, Japan, pp. 87-105.
  10. Miller, R.J., 1978. Saturation of crab traps: reduced entry and escapement. J. Cons. int. Explor. Mer., 38, 338-345. https://doi.org/10.1093/icesjms/38.3.338

Cited by

  1. On the hydrodynamic resistance and stabilization of the coonstripe shrimp pot to reduce catch of a small size shrimp vol.48, pp.1, 2012, https://doi.org/10.3796/KSFT.2012.48.1.001
  2. A Survey of Shrimp Pot Fishery Bycatch and Discard in Funka Bay, Hokkaido, Japan vol.44, pp.4, 2011, https://doi.org/10.5657/KFAS.2011.0397
  3. Size selectivity of a dome–shaped pot for Morotoge shrimp Pandalopsis japonica in the eastern coastal waters of Korea vol.51, pp.3, 2015, https://doi.org/10.3796/KSFT.2015.51.3.396