Journal of the Korean Institute of Illuminating and Electrical Installation Engineers (조명전기설비학회논문지)

The Korean Institute of IIIuminating and Electrical Installation Engineers (한국조명전기설비학회)
권호 표지
DOI QR코드

DOI QR Code

Efficiency Optimization Control of SynRM Drive using Multi-AFLC

다중 AFLC를 이용한 SynRM 드라이브의 효율 최적화 제어

  • 최정식 (순천대학교 전기제어공학과) ;
  • 고재섭 (순천대학교 대학원 전기공학과) ;
  • 장미금 (순천대학교 대학원 전기공학과) ;
  • 정동화 (순천대학교 전기제어공학과)
  • Received : 2009.12.31
  • Accepted : 2010.02.16
  • Published : 2010.05.31
Download PDF
⟨ Previous Next ⟩

Abstract

Optimal efficiency control of synchronous reluctance motor(SynRM) is very important in the sense of energy saving and conservation of natural environment because the efficiency of the SynRM is generally lower than that of other types of AC motors. This paper is proposed a novel efficiency optimization control of SynRM considering iron loss using multi adaptive fuzzy learning controller(AFLC). The optimal current ratio between torque current and exciting current is analytically derived to drive SynRM at maximum efficiency. This paper is proposed an efficiency optimization control for the SynRM which minimizes the copper and iron losses. There exists a variety of combinations of d and q-axis current which provide a specific motor torque. The objective of the efficiency optimization control is to seek a combination of d and q-axis current components, which provides minimum losses at a certain operating point in steady state. The control performance of the proposed controller is evaluated by analysis for various operating conditions. Analysis results are presented to show the validity of the proposed algorithm.

SynRM 효율최적화 제어는 다른 교류전동기에 비해 SynRM의 효율이 낮기 때문에 에너지 절약과 환경보존의 관점에서 매우 중요하다. 본 논문에서는 다중 AFLC를 이용하여 철손을 고려한 SynRM의 새로운 효율 최적화 제어를 제안하였다. 최대효율에서 SynRM을 구동하기 위해 토크전류와 여자전류사이의 최적전류비를 분석하여 구한다. 본 논문에서는 동손과 철손을 최소로 하는 SynRM의 효율 최적화 제어를 제안하였다. 특정한 모터토크를 제공하는 d축과 q축 전류의 다양한 조합이 존재한다. 효율 최적화의 목적은 정상상태에서 최소 손실을 제공하는 d축과 q축 전류의 조합을 찾는 것이며, 제안된 제어기의 제어 성능은 다양한 동작조건의 분석을 통해 평가되었다. 분석된 결과는 제안된 알고리즘의 타당성을 입증한다.

Keywords

References

  1. T. Matsuo and T. A. Lipo, “Field oriented control of synchronous reluctance machine,” in Proc. PESC, pp. 425-431, 1993. https://doi.org/10.1109/PESC.1993.471965
  2. A. Fratta, A. Vagati and F. Villata, “Control of a reluctance synchronous motor for spindle application,” in Proc. IPEC-Tokyo, pp. 708-715, 1990.
  3. R. E. Betz, et al., “Control of synchronous reluctance machines,” IEEE Trans. IA, vol. 29, no. 6, pp.1110-1121, 1993. https://doi.org/10.1109/28.259721
  4. L. Xu and J. Yao, “A compensated vector control scheme of a synchronous reluctance motor considering saturation and iron losses,” IEEE Transaction on Industry Applications, Vol. 1A-28, no. 6, pp. 1330-1338, 1992. https://doi.org/10.1109/28.175285
  5. A. Vagati, T. A, Lipo, et al., “Synchronous reluctance motors and drives - A New Alternative,” IEEE IAS Annual Meet. Tutorial Course Note, 1994.
  6. E. S. Sergaki and G. S. Stavrakakis, “Online search based fuzzy optimum efficiency operation in steady and transient states for DC and AC vector controlled motors,” 18th International Conference on ICEM 2008, pp. 1-7, 2008. https://doi.org/10.1109/ICELMACH.2008.4800117
  7. D. de Almeida Souza, W. C. P. de Aragao Filho and G. C. D. Sousa, “Adaptive fuzzy controller for efficiency optimization of induction motors,” IEEE Transactions on IE, vol. 54, no. 4, 2007. https://doi.org/10.1109/TIE.2007.895138
  8. J. Zare, “Vector control of permanent magnet synchronous motor with surface magnet using artificial neural networks,” 43rd International UPEC 2008, pp. 1-4, 2008. https://doi.org/10.1109/UPEC.2008.4651647
  9. J. S. Ko, J. S. Choi, K. T. Park, B. S. Park and D. H. Chung, “Efficiency Optimization Control of SynRM Drive by LM-FNN Controller”, ICPE'07, pp. 373-377, 2007. https://doi.org/10.1109/ICPE.2007.4692412
  10. J. S. Ko, J. S. Choi, K. T. Park, B. S. Park and D. H. Chung, “Maximum Torque Control of SynRM Drive using ALM-FNN Controller,” ICCAS'07, pp. 1609-1612, 2007. https://doi.org/10.1109/ICCAS.2007.4406627
  11. J. S. Choi, J. S. Ko and D. H. Chung, “Efficiency optimization control of SynRM drive,” ICCAS‘06, TPA-8, 2006.
  12. J. S. Choi, J. S. Ko and D. H. Chung, “Hybrid artificial intelligent control for speed control of induction motor,” ICCAS‘06, TPA-6, 2006.
  13. J. S. Choi, J. S. Ko and D. H. Chung, “Maximum torque control of IPMSM drive with LM-FNN controller,” ICCAS‘06, TPA-7, 2006.

Cited by

  1. A Method to Design the Rotor of Synchronous Reluctance Motors for Maximum Torque and Power Factor vol.27, pp.12, 2013, https://doi.org/10.5207/JIEIE.2013.27.12.093