Journal of the Korean Institute of Illuminating and Electrical Installation Engineers (조명전기설비학회논문지)

The Korean Institute of IIIuminating and Electrical Installation Engineers (한국조명전기설비학회)
권호 표지
DOI QR코드

DOI QR Code

Maximum Torque Control of SynRM Drive with AIPI

AIPI에 의한 SynRM 드라이브의 최대토크 제어

  • 고재섭 (순천대학교 전기제어공학과) ;
  • 최정식 (순천대학교 대학원 전기공학과) ;
  • 정동화 (순천대학교 전기제어공학과)
  • Received : 2009.12.15
  • Accepted : 2010.01.11
  • Published : 2010.05.31
Download PDF
⟨ Previous Next ⟩

Abstract

This paper proposes maximum torque control of SynRM drive using artificial intelligent(AI)PI and artificial neural network(ANN). The control method is applicable over the entire speed range and considered the limits of the inverter's current and voltage rated value. For each control mode, a condition that determines the optimal axis current for maximum torque operation is derived. The proposed control algorithm is applied to SynRM drive system controlled AIPI and ANN controller and the operating characteristics controlled by maximum torque control are examined in detail.

본 논문은 AIPI 및 ANN에 의한 SynRM 드라이브의 최대토크 제어를 제시한다. 본 논문은 인버터의 정격 전압과 전류의 한계 조건을 고려하여 전 속도영역에서 최대토크제어를 제시한다. 속도에 따라 각 제어모드에서 최대토크를 발생하기 위한 최적의 전류값을 계산하고. 계산된 최적전류를 이용하여 최대토크 제어를 수행한다. 제시된 최대토크 제어 알고리즘은 AIPI와 ANN 제어기와 함께 SynRM 드라이브에 적용하여 동작특성을 분석하고 그 타당성을 제시한다.

Keywords

References

  1. T. Matsuo and T. A. Lipo, “Field oriented control of synchronous reluctance machine,” in Proc. PESC, pp. 425-431, 1993. https://doi.org/10.1109/PESC.1993.471965
  2. A. Fratta, A. Vagati and F. Villata, “Control of a reluctance synchronous motor for spindle application,” in Proc. IPEC-Tokyo, pp. 708-715, 1990.
  3. R. E. Betz, et al., “Control of synchronous reluctance machines,” IEEE Trans. IA, vol. 29, no. 6, pp.1110-1121, 1993. https://doi.org/10.1109/28.259721
  4. L. Xu and J. Yao, “A compensated vector control scheme of a synchronous reluctance motor considering saturation and iron losses,” IEEE Transaction on Industry Applications, Vol. 1A-28, no. 6, pp. 1330-1338, 1992. https://doi.org/10.1109/28.175285
  5. A. Vagati, T. A, Lipo, et al., “Synchronous reluctance motors and drives - A New Alternative,” IEEE IAS Annual Meet. Tutorial Course Note, 1994.
  6. H. D. Lee, et al., “Efficiency optimized direct torque control of synchronous reluctance motor using feedback linearization,” IEEE Trans. on IE, vol. 46, no. 1, pp. 192-198, 1999. https://doi.org/10.1109/41.744411
  7. A. Chiba and T. Fukao, “A closed loop operation of super high speed reluctance motor for quick torque response,” IEEE Trans. on IA, vol. 28, no. 3, pp. 600-606, 1992. https://doi.org/10.1109/28.137445
  8. T. Senjyu, K. Kinjo, N. Urasaki and K. Uezato, “High efficiency control of synchronous reluctance motors using kalman filter,” IEEE Trans. on IE, vol. 50, no. 4, pp. 726-732, 2003. https://doi.org/10.1109/TIE.2003.814998
  9. T. Senjyu, T. Shingaki and K. Uezato, “A high efficiency control strategy for synchronous reluctance motor considering stator iron loss with EKF,” in Proc. ICEE 2000, Kitakyushu, Japan, pp. 179-182, 2000.
  10. M. Ali Unar, D. J. Murray-Smith and S. F. Ali Shah, “Design and tuning of fixed structure PID controller - A survey,” Technical Report CSC-96016, Faculty of Engineering, Glasgow University, Scotland, 1996.
  11. J. S. Ko, J. S. Choi, K. T. Park, B. S. Park and D. H. Chung, “Efficiency Optimization Control of SynRM Drive by LM-FNN Controller”, ICPE'07, pp. 373-377, 2007.
  12. J. S. Ko, J. S. Choi, K. T. Park, B. S. Park and D. H. Chung, “Maximum Torque Control of SynRM Drive using ALM-FNN Controller,” ICCAS'07, pp. 1609-1612, 2007 https://doi.org/10.1109/ICCAS.2007.4406627
  13. J. S. Choi, J. S. Ko and D. H. Chung, “Efficiency optimization control of SynRM drive,” ICCAS-06, TPA-8, 2006. https://doi.org/10.1109/SICE.2006.315625
  14. J. S. Choi, J. S. Ko and D. H. Chung, “Hybrid artificial intelligent control for speed control of induction motor,” ICCAS-06, TPA-6, 2006. https://doi.org/10.1109/SICE.2006.315623
  15. J. S. Choi, J. S. Ko and D. H. Chung, “Maximum torque control of IPMSM drive with LM-FNN controller,” ICCAS-06, TPA-7, 2006. https://doi.org/10.1109/SICE.2006.315624