DOI QR코드

DOI QR Code

Characterizations of Surface Textured Silicon Substrated by XeF2 Etching System

이불화제논 기상 식각에 의한 실리콘 기판의 표면 텍스쳐링 특성

  • Received : 2010.02.26
  • Accepted : 2010.03.20
  • Published : 2010.06.01

Abstract

We investigated the haze and the surface roughness of textured Si substrates etched by $XeF_2$ etching system with the etching parameters of $XeF_2$ pressure, etching time, and etching cycle. Here the haze was obtained as a function of wavelength from the measured reflectance. The haze of textured Si substrates was strongly affected by the etching parameter of etching cycle. The surface roughness of textured Si substrates was calculated with the haze and the scalar scattering theory at the wavelength of 800 nm. Then, the surface roughness was compared with that measured by atomic force microscope. The surce roughness obtained by two methods was changed with the similar tendency n terms of $XeF_2$ etching conditions.

Keywords

Acknowledgement

Supported by : 지식경제부

References

  1. D.-H. Neuhaus and A. Manzer, "Industrial Silicon Water Solar Cell," Advanced in OptoElectrorics, ID 24521, 2007.
  2. V. Y. Yerokhov, R. Hezel, M. Lipinski, R. Cioch, H. Nagel, A. Mylyanych, and P. Panek, "Cost-effective methods of texturing for silicon solar cell," Sol. Energy Mater. Sol. Cell, vol. 72, pp. 291-298, 2002. https://doi.org/10.1016/S0927-0248(01)00177-5
  3. H. Saha, S.K. Datta, K. Mukhopadhyay, S. Banerjee, and M.K. Mukherjee, "Influence of surface texturization on the light trapping and spectral response of silicon solar cell," IEEE Trans. Elctron Devices, vol. 39, pp. 1100-1107, 1992. https://doi.org/10.1109/16.129089
  4. Z. Xi, D. Yang, W. Dan, C. Jun, X. Li, and D. Que, "Textrization of cast multicrystalline silicon for solar cell," Semicond. Sci. Technol., vol. 19, pp. 485 - 489, 2004. https://doi.org/10.1088/0268-1242/19/3/035
  5. J. S. Yoo, J. H. Lee, and J. Yi, "A Study on $MgF_2/CeO_2$ AR Coating of Mono-Crystalline Silicon Solar Cell," Trans. KIEE., vol. 52C, No. 10, pp. 447-450, Oct. 2003.
  6. M. Python, E. Vallat-Sauvain, J. Bailat, D. Domine, L. Fesquet, A. Shah, and C. Ballif, "Relation between substrate surface morphology and microcrystalline", silicon solar cell performance," J. Non-Cryst. Solids, vol. 354, pp. 2258-2262, 2008. https://doi.org/10.1016/j.jnoncrysol.2007.09.084
  7. S. Winderbaum, O. Reinhold, and F. Yun, "Reactive ion etching (RIE) as a method for texturing polycrystalline silicon solar cell," Sol. Energy Mater. Sol. Cell, vol. 46, No. 3, pp. 239-248, 1997. https://doi.org/10.1016/S0927-0248(97)00011-1
  8. J. S. Yoo, S. K. Dhungel, and J. Yi, "A study on Silicon dry Etching for Solar Cell Fabrication Using Hollow Cathode Plasma System," Trans. KIEE., vol. 53C, No. 2, pp. 62-66, Feb. 2004.
  9. B. Gonzalez, R. Guerrero-Lemus, B. Diaz-Herrera, N. Marreo, J. Mendez-Ramos, and D. Borchert, "Optimization of roughness, reflection and photoluminescence for acid textured mc-Si solar cells etched at different $HF/HNO_3$ concentrations," Mat. Sci. Eng., vol. B159-160, pp. 295-298, 2009.
  10. S. DeWolf, P. Choulat, E. Vazsonyi, R. Einhaus, E. Van Kerschaver, K. DE Clercq, and J. Szlufcik, "Towards industrial applications of isotropic texturing for multi-crystalline silicon cells," 16th EC PVSEC, pp. 1521-1524, 2000.
  11. P. Fath and G. Wileke, "Polycrystalline silicon water engineering for photovoltaic applications," Semicond. Sci. Technol., vol.9, pp. 101-104, 1994. https://doi.org/10.1088/0268-1242/9/1/018
  12. N. Senoussaoui, T. Repmann, T. Brammer, H. Stiebig, and H. Wagner, "Optical Properties of Microcrystallin, Thin Film Solar Cells", Rev. Energ. Ren., vol. 3, pp. 49-56, 2000.
  13. H. E. Bennett and J. O. Pocteus, "Relation Between Surface Reughness and Specular Reflectance at Normal Incidence," J. Opt. Soc. Am., vol. 51, pp. 123-129, 1961. https://doi.org/10.1364/JOSA.51.000123