Journal of Electrical Engineering and Technology

  • 제5권2호
  • /
  • Pages.319-328
  • /
  • 2010
  • /
  • 1975-0102(pISSN)
  • /
  • 2093-7423(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지
DOI QR코드

DOI QR Code

An Optimal Design Methodology of an Interleaved Boost Converter for Fuel Cell Applications

  • Choe, Gyu-Yeong (School of Information and Communication Engineering, Sungkyunkwan University) ;
  • Kim, Jong-Soo (School of Information and Communication Engineering, Sungkyunkwan University) ;
  • Kang, Hyun-Soo (Korea Railroad Research Institute) ;
  • Lee, Byoung-Kuk (School of Information and Communication Engineering, Sungkyunkwan University)
  • 투고 : 2010.01.13
  • 심사 : 2010.03.31
  • 발행 : 2010.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, an optimal selection methodology for the number of phases will be proposed for an interleaved boost converter (IBC). Also, the analysis of the input current ripple according to CCM and DCM is carried out. The proposed design methodology will be theoretically analyzed, and its validity verified by simulation as well as with experimental results. Moreover, a comparison of cost and efficiency based on a 600W laboratory prototype using the Ballard NEXA 1.2kW PEMFC system is demonstrated.

키워드

참고문헌

  1. J. M. Carrasco et al., "Power-electronic systems for the grid integration of renewable energy sources: A survey," IEEE Trans. Ind. Electron., Vol. 53, Issue 4, pp. 1002-1016, Jun., 2006. https://doi.org/10.1109/TIE.2006.878356
  2. U.S Department of Energy, Summary of annual merit review fuel cells subprogram, [Online]. Available: http://www.hydrogen.energy.gov/pdfs/review07/42072-05_fuel_cells.pdf
  3. S. J. Jang, T. W. Lee, K. S. Kang, S. S. Kim, C. Y. Won, "A new active clamp sepic-flyback converter for a fuel cell generation system," in Proc. Ind. Electron. Soc., pp. 2538-2542, 2005.
  4. T. F. Wu, Y. S. Lai, J. C. Hung, Y. M. Chen, "Boost converter with coupled inductors and buck-boost type of active clamp," IEEE Trans. Ind. Electron., Vol. 55, Issue 1, pp. 154-162, Jun., 2008. https://doi.org/10.1109/TIE.2007.903925
  5. P. W. Lee, Y. S. Lee, D. K. Cheng, X. C. Liu, "Steady-state analysis of an interleaved boost converter with coupled inductors," IEEE Trans. Ind. Electron., Vol. 47, Issue 4, pp. 787-795, Aug., 2000. https://doi.org/10.1109/41.857959
  6. L. Huber, B. T. Irving, M. M. Jovanovic, "Open-loop control methods for interleaved DCM/CCM boundary boost PFC converters," IEEE Trans. on Power Elect., Vol. 23, Issue 4, pp. 1649-1657, July, 2008 https://doi.org/10.1109/TPEL.2008.924611
  7. Y. Chen, K. M. Smedley, "Parallel operation of onecycle controlled three-phase PFC rectifiers," IEEE Trans. Ind. Electron., Vol. 54, Issue 6, pp. 3217-3224, Dec., 2007. https://doi.org/10.1109/TIE.2007.905917
  8. B. A. Miwa, D. M. Dtten, M. F. Schlecht, "High efficiency power factor correction using interleaving technique," IEEE Pro. APEC'92, Vol. 1, pp. 557-568, Feb., 1992.
  9. H. B. Shin, E. S. Jang, J. K. Park, H. W. Lee, T. A. Lipo, "Small-signal analysis of multiphase interleaved boost converter with coupled inductor," IEE Proc. Electr. Power Appl., Vol. 152, No. 5, pp. 1161-1170, Sept., 2005. https://doi.org/10.1049/ip-epa:20045275
  10. J. J. Lee, B. H. Kwon, "Active-clamped ripple-free DC/DC converter using an input-output coupled inductor," IEEE Trans. Ind. Electron., Vol. 55, Issue 4, pp. 1842-1854, April, 2008. https://doi.org/10.1109/TIE.2007.907666
  11. R. J. Wai, C. Y. Lin, R. Y. Duan, Y. R. Chang, "High-efficiency DC-DC converter with high voltage gain and reduced switch stress," IEEE Trans. Ind. Electron., Vol. 54, Issue 1, pp. 354-364, Feb., 2007. https://doi.org/10.1109/TIE.2006.888794
  12. H. B. Shin, J. G. Park, S. K. Chung, H. W. Lee, T. A. Lipo, "Generalized steady-state analysis of multiphase interleaved boost converter with coupled inductors," IEE Electr. Power Appl., Vol. 152, Issue 3, pp. 584-594, May, 2005. https://doi.org/10.1049/ip-epa:20045052
  13. M. H. Todorovic, L. Palma, P. N. Enjeti, "Design of a wide input range DC-DC converter with a robust power control scheme suitable for fuel cell power conversion," IEEE Trans. Ind. Electron., Vol. 55, Issue 3, pp. 1247-1255, March, 2008. https://doi.org/10.1109/TIE.2007.911200
  14. C. T. Pan, Y. H. Liao, "Modeling and control of circulating currents for parallel three-phase boost rectifiers with different load sharing," IEEE Trans. Ind. Electron., Vol. 55, Issue 7, pp. 2776-2785, July, 2008. https://doi.org/10.1109/TIE.2008.925647
  15. N. Mohan, T. M. Undeland, W. P. Robbins, "Power electronics converter," application and design, 3rd ed. JOHN WILEY & SONS, INC., ch.7, 2003

피인용 문헌

  1. Analysis, design and implementation of isolated bidirectional converter with winding-cross-coupled inductors for high step-up and high step-down conversion system vol.7, pp.1, 2014, https://doi.org/10.1049/iet-pel.2013.0072
  2. Cascaded Bidirectional Converter Topology for 700 W Transformerless High Frequency Inverter vol.27, pp.5, 2016, https://doi.org/10.1007/s40313-016-0256-0
  3. Highly-Efficient and Compact 6 kW/4 × 125 kHz Interleaved DC-DC Boost Converter with SiC Devices and Low-Capacitive Inductors vol.10, pp.3, 2017, https://doi.org/10.3390/en10030363
  4. Fault diagnosis algorithm based on switching function for boost converters vol.102, pp.7, 2015, https://doi.org/10.1080/00207217.2014.966780
  5. A Study on Variable Speed Generation System with Energy Saving Function vol.8, pp.1, 2013, https://doi.org/10.5370/JEET.2013.8.1.137
  6. Robust low frequency current ripple elimination algorithm for grid-connected fuel cell systems with power balancing technique vol.36, pp.5, 2011, https://doi.org/10.1016/j.renene.2010.10.023
  7. MPPT controller for an interleaved boost dc–dc converter used in fuel cell electric vehicles vol.39, pp.27, 2014, https://doi.org/10.1016/j.ijhydene.2014.03.185
  8. A Unified Analytical Modeling of the Interleaved Pulse Width Modulation (PWM) DC–DC Converter and Its Applications vol.28, pp.11, 2013, https://doi.org/10.1109/TPEL.2013.2245683
  9. Improved performance and energy management strategy for proton exchange membrane fuel cell/backup battery in power electronic systems vol.42, pp.13, 2017, https://doi.org/10.1016/j.ijhydene.2016.09.191
  10. Modeling and Management of Batteries and Ultracapacitors for Renewable Energy Support in Electric Power Systems–An Overview vol.43, pp.12, 2015, https://doi.org/10.1080/15325008.2015.1038757
  11. Effects of the Sintering Temperature on the Properties of Ce0.85Gd0.1Ca0.05O2- δ Electrolyte Materials for SOFC vol.140, pp.1, 2012, https://doi.org/10.1080/10584587.2012.741453
  12. A Study on the Design and Selection of Switch and Diode by Analyzing Current Ringing on DCM Bi-directional Buck Converter vol.17, pp.1, 2012, https://doi.org/10.6113/TKPE.2012.17.1.14
  13. A High Efficiency DC-DC Boost Converter with Passive Regenerative Snubber vol.9, pp.2, 2014, https://doi.org/10.5370/JEET.2014.9.2.501
  14. New Multiphase Hybrid Boost Converter with Wide Conversion Ratio for PV System vol.2014, 2014, https://doi.org/10.1155/2014/637468
  15. Comparison of Battery Charging Strategies for PHEVs using Propulsion Motor Inductance and Multi-Function Inverter vol.16, pp.4, 2011, https://doi.org/10.6113/TKPE.2011.16.4.326
  16. A novel reconfigurable hybrid system for fuel cell system vol.40, pp.43, 2015, https://doi.org/10.1016/j.ijhydene.2015.08.031
  17. Optimized Multiport DC/DC Converter for Vehicle Drivetrains: Topology and Design Optimization vol.8, pp.8, 2018, https://doi.org/10.3390/app8081351