사이클 페달 회전수에 영향을 미치는 자세 요인

Cyclists' Posture Factors Affecting Pedaling Rate in Cycle

  • 하종규 (아주대학교 공학연구소) ;
  • 장영관 (강원대학교 산업경영공학과) ;
  • 기재석 (인천대학교 산학협력중심대학육성사업단) ;
  • 김상수 (부산지방공단스포원)
  • 투고 : 2010.10.14
  • 심사 : 2010.12.16
  • 발행 : 2010.12.31

초록

Despite the importance of cycling postures during cycling performances, there has been a very little research investigating cycling postures and pedaling rate for particularly concerning domestic cyclists. The aim of this study was to analyze correlations and effects between cycling postures and pedaling rate in track cycling. Twelve male racing cyclists (six racing and university cyclists) participated in this research. For this study, seven infrared cameras (Qualisys ProReflex MCU-240s) were used for collecting data and these were processed via QTM (Qualisys Tracker Manager) software. It appeared that pedaling rate had correlations with regard to a shoulder angle (R=-.601) and displacement between shoulder joints(R= -.637), but a knee (R=-.601) and ankle angle (R=.667). Moreover, two multiple regression equations of pedaling rate for cycling postures were significant and R2 of the first order equation y (pedaling rate) = 0.039x (knee angle) - 1.068 was less than the second order equation y = 0.006x2 - 1.287x + 69.674. In conclusion, cycling postures affected the pedaling rate. Further study should be researched on postures in relation to air resistance in a wind tunnel.

키워드

참고문헌

  1. 이용우(2005). 사이클링 초최대운동 시 RPM과 족관절의 운동학적 분석. 한국운동역학회지, 15(4), 75-83.
  2. 이순호 (1997). 사이클의 안장높이에 따른 하지 분절의 역학적 에너지 변화. 박사학위논문. 성균관대학교 대학원.
  3. 류창업, 최성진, 박종진, 강순용 (2001). 사이클링 선수의 슬관절각에 따른 하지동작의 운동학적 분석. 한국운동역학회지, 11(2), 259-279.
  4. 옥성수, 김태영, 유경석. "사이클링시 하지분절의 속도변화에 따른 운동학적 및 근전도 분석", 한국사회체육학회지, 18(2002) :1231-1243.
  5. Gregor, R. J., Cavanagh, P. R., and LaForture, M. (1985). Knee flexor moments during propulsion in cycling-A creative solution to Lombard's Paradox. Journal of Biomechanics. (Elmsford,- N.Y):18(5), pp.307-316 Refs:28. https://doi.org/10.1016/0021-9290(85)90286-6
  6. Jorge, M., and Hull, M. L. (1984). Biomechanics of Bicycle pedalling. In, Terauds, J.(ed) et al., Sports Biomechanics. Proceedings of ISBS, Der Mar, Calif., Reserch Center for Sports, c, pp. 223-246. Refs:20
  7. Martin JC, Spirduso WW. (2001). Determinants of maximal cycling power: crank length, pedaling rate and pedal speed. Eur J Appl Physiol. 84(5):413-8. https://doi.org/10.1007/s004210100400
  8. Redfield, R., and Hull, M. L. (1986). On the relation between joint moments and pedalling rates at constant power in cycling. Journal of Biomechanics. 19, 845-854.