초정압 방전램프(UCD)를 적용한 안전조명 장치에 관한 연구

An Experimental Study on the a Light Device which Adopt Safety Ultra Constant Dischange Lamp

  • 정풍기 (군산대학교 기계공학과) ;
  • 김영철 (군산대학교 기계공학과)
  • Jeong, Poong-Gi (Dept. of Mechanical Engineering, Kunsan National University) ;
  • Kim, Young-Chul (Dept. of Mechanical Engineering, Kunsan National University)
  • 투고 : 2010.07.20
  • 심사 : 2010.09.10
  • 발행 : 2010.12.31

초록

This paper describes the development of various lighting equipment adapting Ultra Constant Discharge Lamp that has newly been on commercial supply in the market. Meeting the required conditions of lighting equipment, various types of UCD Lamp equipment with excellent performances could be successfully developed. In order to provide a guideline for the economical lighting product selection, the analyzed data comparison between Hi-pressure Sodium Lamp which has been the most popular lamp for street lighting and UCD Lamp is provided. The conclusions of the study are made as follows; (1) The performance measurement result of UCD Lamp shows excellent Luminous Efficacy as 108Lm/W, daylight-like Color Rendering Index as 90Ra, and the best operating temperature range as $-50^{\circ}C{\sim}+85^{\circ}C$. Comparing to the Hi-pressure Sodium Lamp, UCD could be evaluated as much superior products. (2) In an assembled status with the lighting fixture (Type STB형-60W), UCD Lamp was tested OK for one hour duration at the temperature range form $-50^{\circ}C$ to $+85^{\circ}C$ and the humidity of 98%. The operation at the extremely low temperature can be an excellent feature to enable the export to the cold temperature regions such as Northern Europe and Russia and the specific applications for defense systems and special industry. (3) As UCD Lamp is a genuine Korea made product following Energy-saving and Eco-friendly policy, it should be appreciated as one of the best $CO^2$ reduction Green product.

키워드

참고문헌

  1. Rajaraman, Kapil, Kushner, Mark J, "A Monte Carlo simulation of radiation trapping in electrodeless gas discharge lamps", Joumal of physics D, applied physics, Vol.37, No.13, pp.1780-1791, 2004. https://doi.org/10.1088/0022-3727/37/13/009
  2. an van Dijk, Bart Hartgers, Jeroen Jonkers and Joost van der Mullen, "A collisional radiative model for mercury in high-current discharges", Journal of physics D, applied physics, Vol.33 No.21, pp.2798-2806, 2000. https://doi.org/10.1088/0022-3727/33/21/320
  3. Oleg Popov and Jakob Maya, "Characteristics of electrodeless ferrite free fluorescent lamp operated at frequencies of 1-15 MHz", Plasma sources science & technology, Vol.9 No.2, pp.227-237, 2000. https://doi.org/10.1088/0963-0252/9/2/317
  4. J Jonkers, M Bakker and J A M van der Mulleny "Absorption measurements on a low pressure, inductively coupled, argon mercury discharge for lighting purposes:1. The gas temperature and argon metastable states density", Journal of physics D, applied physics, Vol.30 No.13, pp.1928-1933, 1997. https://doi.org/10.1088/0022-3727/30/13/015
  5. S Kitsinelis, R Devonshire, M Jinno, K H Loo, D A Stone and R C Tozer, "Relative enhancement of near-UV emission from a pulsed low-pressure mercury discharge lamp, using a rare gas mixture", Journal of physics D, applied physics, Vol.37 No.12, pp.1630-1638, 2004. https://doi.org/10.1088/0022-3727/37/12/007
  6. Depond, J.M., "High voltage, mercury-free fluorescent lamps with cold cathodes: state of art and future developments", Industry Applications Conference, 2000. Conference Record of the 2000 IEEE, Vol.5, pp.3322-3325, 2000.
  7. M Born, "Physics of mercury free high pressure discharge lamps", Plasma sources science & technology, Vol.11 No.3, pp.A55-A63, 2002. https://doi.org/10.1088/0963-0252/11/3A/308
  8. David W. Oxtoby, Wade A. Freeman, Toby F. Block, "Science of change", pp.611-614, 2001.