형광체 변환 고출력 백색 LED 패키지의 가속 열화 스트레스

Accelerated Degradation Stress of High Power Phosphor Converted LED Package

  • 천성일 (전자부품연구원 신뢰성물리연구센터) ;
  • 장중순 (아주대학교 산업공학과)
  • Chan, Sung-Il (Reliability Physics Research Center, Korea Electronic Technology Institute) ;
  • Jang, Joong-Soon (Division of Industrial and Information System Engineering, Ajou University)
  • 투고 : 2010.10.06
  • 심사 : 2010.11.23
  • 발행 : 2010.12.30

초록

포화 수증기압이 고출력 형광체 변환 백색 LED 패키지의 열화현상에 미치는 주요 스트레스 인자임을 확인하였다. 또한 LED 패키지의 가속 수명시험을 통하여 포화 수증기압이 효과적인 가속 스트레스 인자임을 확인하였다. 실험조건은 350 mA 전류를 인가한 것과 인가하지 않은 2가지 조건에 대해 $121^{\circ}C$, 100% R.H. 환경에서 최대 168 시간동안 진행하였다. 실험결과 두 실험 모두 광 출력 감소, 스펙트럼 세기의 감소, 누설전류 및 열 저항이 증가하였다. 고장분석 결과 광 특성의 열화는 봉지재의 변색과 기포에 의해 발생한 것으로 나타났다. LED 패키지의 변색과 흡습에 의해 유발되는 기계적 (hygro-mechanical) 스트레스에 의한 기포 발생은 패키지 열화의 중요한 인자로써, 포화 수증기압이 고출력 LED의 수명시험 시간을 단축하기 위한 스트레스 인자로 적합함을 알 수 있었다.

We found that saturated water vapor pressure is the most dominant stress factor for the degradation phenomenon in the package for high-power phosphor-converted white light emitting diode (high power LED). Also, we proved that saturated water vapor pressure is effective acceleration stress of LED package degradation from an acceleration life test. Test conditions were $121^{\circ}C$, 100% R.H., and max. 168 h storage with and without 350 mA. The accelerating tests in both conditions cause optical power loss, reduction of spectrum intensity, device leakage current, and thermal resistance in the package. Also, dark brown color and pore induced by hygro-mechanical stress partially contribute to the degradation of LED package. From these results, we have known that the saturated water vapor pressure stress is adequate as the acceleration stress for shortening life test time of LED packages.

키워드

참고문헌

  1. K. R. Hardy, M. S. Olsson, B. P. Lakin, K. A. Steeves, J. R. Sanderson, J. E. Simmons and P. A. Weber, "Advances in High Brightness Light Emitting Diodes in Underwater Application", Oceans, 1 (2008).
  2. M. Meneghini, A. Tazzoli, G. Mura, G. Meneghesso and E. Zanoni, "A Review on the Physical Mechanisms That Limit the Reliability of GaN-Based LEDs", IEEE Trans. Device Mater. Reliab., 57(1), 108 (2010).
  3. Alliance for Solid-State Illumination System and Technologies of Lighting Research Center, "LED Life for General Lighting", Lighting Research Center, New York (2006).
  4. J. M. Kang, J. W. Kim, J. H. Choi, D. H. Kim and H. K. Kwon, "Life-time Estimation of High-Power Blue Light-Emitting Diode Chips", Microelectron. Reliab., 49(9-11), 1231 (2009). https://doi.org/10.1016/j.microrel.2009.07.052
  5. M. Meneghini, S. Podda, A. Morelli, R. Pintus, L. Trevisanello, G. Meneghesso, M. Vanzi and E. Zanoni, "High Brightness GaN LEDs Degradation during DC and Pulsed Stress", Microelectron. Reliab., 46(9-11), 1720 (2006). https://doi.org/10.1016/j.microrel.2006.07.050
  6. S. Buso, G. Spiazzi, M. Meneghini and G. Meneghesso, "Performance Degradation of High Brightness Light Emitting Diodes Under DC and Pulsed Bias", IEEE Trans. Device Mater. Reliab., 8(2), 312 (2008). https://doi.org/10.1109/TDMR.2008.916549
  7. L. Trevisanello, M. Meneghini, G. Mura, M. Vanzi, M. Pavesi, G. Meneghesso and E. Zanoni, "Accelerated Life Test of High Brightness Light Emitting Diodes", IEEE Trans. Device Mater. Reliab., 8(2), 304 (2008). https://doi.org/10.1109/TDMR.2008.919596
  8. C. C. Tsai, J. Wang, M. H. Chen, Y. C. Hsu, Y. J. Lin, C. W. Lee, S. B. Huang, H. L. Hu and W. H. Cheng, "Investigation of Ce: YAG Doping Effect on Thermal Aging for High Power Concerted White Light Emitting Diodes", IEEE Trans. Device Mater. Reliab., 9(3), 367 (2009). https://doi.org/10.1109/TDMR.2009.2022545
  9. C. M. Tan, B. K. Eric Chen, G. Xu and Y. Liu, "Analysis of Humidity Effects on the Degradation of High-Power White LEDs", Microelectron. Reliab., 49(9-11). 1226 (2009). https://doi.org/10.1016/j.microrel.2009.07.005
  10. X. Luo, B. Wu and S. Liu, "Effects of Moist Environments on LED Module Reliability", IEEE Trans. Device Mater. Reliab., 10(2), 182 (2010). https://doi.org/10.1109/TDMR.2009.2038367
  11. M. Meneghini, L. R. Trevisanello, G. Meneghesso and E. Zanoni, "A Review on the Reliability of GaN-Based LEDs", IEEE Trans. Device Mater. Reliab., 8(2), 323 (2008). https://doi.org/10.1109/TDMR.2008.921527
  12. F. Wu, W. Zhao, S. Yang and C. Zhang, "Failure Modes and Failure Analysis of White LEDs", Proc. 9th International Conference on Electronic Measurement and Instruments (ICEMI 2009), 5274756, 4978 (2009).
  13. Ministry of Knowledge Economy(MKE), "Reliability Improvement of Ceramic Package for High Brightness White LEDs(in Kor.)", pp.93-99, MKE, Seoul (2008).
  14. N. Narendran, Y. Gu, H. Y. Freyssinier and L. Deng, "Solid- State Lighting: Failure Analysis of White LEDs", J. Cryst. Growth, 268, 449 (2004). https://doi.org/10.1016/j.jcrysgro.2004.04.071
  15. Ministry of Knowledge Economy(MKE), "Development of High Efficiency Lighting Technology for Optical Semiconductor(in Kor.)", pp.72-86, MKE, Seoul (2008).
  16. M. Meneghini, L. Trevisanello, C. Sanna, G. Mura, M.Vanzi, G. Meneghesso and E. Zanoni, "High Temperature Electrooptical Degradation of InGaN/GaN HBLEDs", Microelectron. Reliab., 47(9-11), 1625 (2007). https://doi.org/10.1016/j.microrel.2007.07.081
  17. E. Nogueira, M. Vazquez, N. Nunez, "Evaluation of AlGaInP LEDs Reliability based on Accelerated Tests", Microelectron. Reliab., 49(9-11), 1240 (2009). https://doi.org/10.1016/j.microrel.2009.06.031
  18. S. C. Yang, P. Lin, C. P. Wang, S. B. Huang, C. L. Chen, P. F. Chiang, A. T. Lee and M. T. Chu, "Failure and Degradation Mechanisms of High-Power White Light Emitting Diodes", Microelectron. Reliab., 50(7), 959 (2010). https://doi.org/10.1016/j.microrel.2010.03.007
  19. JEDEC Standard EIZ/JESD51-1, Integrated Circuits Thermal Measurement Method-Electrical Test Method (Single Semiconductor Device), EIA (1995).
  20. M. W. Shin and J. P. Jung, "Introduction to LED Packaging Technology(in Kor.)", pp.192-195, Bookswin, Seoul (2009).
  21. H. H Kim, S. H. Choi, S. H. Shin, Y. G. Lee, S. M. Choi and Y. S. Oh, "Thermal Transient Characteristics of Die Attach in High Power LED Package", J. Microelectron. Packag. Soc., 12(4), 331 (2005).
  22. W. S. Lee, Y. W. Ko. C. S. Yoo, K. C. Kim and J. C. Park, "A Study on the Thermal Behaviour of Via Design in the Ceramic Package", J. Microelectron. Packag. Soc., 10(1), 39 (2003).