Journal of ILASS-Korea (한국분무공학회지)

Institute for Liquid Atomization and Spray Systems-Korea (한국분무공학회)
권호 표지

An Experimental Investigation on Spray Behavior of Biodiesel and DME on Blended Ratio in High Temperature and Pressure Ambient Conditions

고온 고압 분위기 조건에서 바이오 디젤과 DME의 혼합비에 따른 분무특성에 관한 연구

  • 방승환 (한양대학교 대학원 기계공학과) ;
  • 전문수 (충주대학교 에너지시스템공학과) ;
  • 이창식 (한양대학교 기계공학부)
  • Received : 2009.12.28
  • Accepted : 2010.03.27
  • Published : 2010.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

The objective of this work is to analyze the macroscopic behavior of spray and injection characteristics on the DME blended biodiesel at different mixing ratios by using spray visualization and injection rate measurement system. The spray images were analyzed to a spray tip penetration, a spray cone angle and a spray area distribution at various mixing ratio of DME by weight. The influence of different injection pressure and ambient pressure on the fuel spray characteristics are investigated for the various injection parameters. In order to analyze the injection characteristics of test fuels, the fuel injection rate is measured at various blending ratio. The variation of viscosity of the blended fuel by the mixing of DME fuel shows the improved effect of spray developments. Also, it was found that the injection quantities of high blended ratio were larger than that of lower blended fuel. Also, higher blending fuel showed a faster evaporation than that of mixing ratio of test fuel because kinetic viscosity was changed by blending ratio.

Keywords

References

  1. C. S. Lee, S. W. Park and S. I. Kwon, "An experimental study on the atomization and combustion characteristics of biodiesel blended fuels," Energy & Fuels, Vol. 19, 2006, pp.2201-2208.
  2. Y. Yoshimoto and H Tamaki, "Reduction of NOx and Smoke Emission in a Diesel engine Fueled by Biodiesel Emulsion Combined with EGR", SAE No. 2001-01-0649, 2001.
  3. Alam, M. Song, J. Acharya, R. Boehman, A. Miler, K., "Combustion and emission performance of low sulfur, ultra low sulfur and biodiesel blends in a DI diesel engines," SAE Tech. No. 2004-01-3024, 2004.
  4. 권상일, 이창식, "바이오디젤 사용에 따른 경유승용차의 나노입자 배출특성 연구", 한국액체미립화학회지, Vol.12, No.1, 2007년, pp.65-70.
  5. S. H. Park, S. H. Yoon, H. K. Suh and C. S. Lee, "Effect of the Temperature Variation on Properties of Biodiesel and Biodiesel-Ethanol Blends Fuels", Oil & Gas Science and Technology, Vol. 63 , No. 6, pp. 737-745, 2008. https://doi.org/10.2516/ogst:2008038
  6. Kapus, P. and Ofner, H., "Development of Fuel Injection Equipment and Combustion System for Dl Diesel Operated on Dimethyl Ether", SAE No.950062, 1995.
  7. M. Y. Kim, S. H. Bang and C. S. Lee, "Experimental investigation of spray and combustion characteristics of dimethyl ether in a common-rail diesel engine", Energy & Fuels, Vol. 21, pp.793-800, 2007. https://doi.org/10.1021/ef060310o
  8. S. H. Bang, B. W. Ryu and C. S. Lee, "An experimental investigation on the spray characteristics of DME blended biodiesel", SAE, NO. 2007-01-3631, 2007.
  9. M. Y. Kim, S. H. Yoon, B. W. Ryu, C. S. Lee, "Combustion and emission characteristics of DME as an alternative fuel for compression ignition engines with a high pressure injection system", Fuel, Volume87, PP 2779-2786, 2008. https://doi.org/10.1016/j.fuel.2008.01.032
  10. 김형준, 박수한, 이창식, "고압 분사 인젝터의 분사 시 기에 따른 DME 분무특성에 관한 실험 및 해석적 연구", 한국액체미립화학회지, Vol.14, No.3, 2009년, pp.109-116.
  11. S. Kajitani, Z. Chen, L., M. Konno and K. T. Rhee, "Engine Performance and Exhaust Characteristics of Direct-Injection Diesel Operated with DME," SAE No. 972973, 1997.