DOI QR코드

DOI QR Code

A Study on Selection of Cleaning Period and Pollution Analysis of Insulators in Tunnel

터널 애자류 오염도 분석과 세정주기 선정에 관한 연구

  • 김영석 (전기안전연구원 진단기술연구부) ;
  • 송길목 (전기안전연구원 진단기술연구부) ;
  • 최명일 (전기안전연구원 진단기술연구부)
  • Received : 2010.02.02
  • Accepted : 2010.03.18
  • Published : 2010.04.30

Abstract

This paper was carried out to estimate pollution levels of various insulators in tunnel and establish cleaning period in each tunnel section. We estimate pollution level that is attached to insulators in environmental pollution area, industrial area, salt damage area. These results that the pollution quantity and conductivity were increased by pollution accumulation period. However, the conductivity showed each other big difference in each tunnel. In particular, the conductivity showed big in environmental pollution(tunnel A) and salt damage(tunnel C) area, It is considered to prevent accident that manage establishing periodic state of cleaning plan. Also, the Grease that spread on the insulator surface in existing is considered that it can prevent accident for long-term by restrain use.

본 연구는 터널구간 내 설치된 각종 애자류의 오염도를 평가하여 각 터널구간마다 세정주기를 마련하기 위해 연구를 수행하였다. 세정주기는 전국의 각 지역을 대상으로 공해, 산업단지, 염해지역을 샘플링하여 애자류에 부착된 오염도에 의해 평가되었다. 그 결과, 오염물의 증가에 의해 포집량과 도전율은 증가하였고, 각 터널마다 그 값은 서로 다르게 나타났다. 특히, 공해 및 염해가 심한 지역은 도전율이 높게 나타났으며, 주기적인 세정계획을 수립하여 관리하는 것이 사고를 미연에 방지할 수 있을 것으로 판단된다. 또한 기존에 애자 표면에 도포하는 절연그리스는 사용을 자제하는 것이 장기적으로 사고를 방지할 수 있을 것으로 판단된다.

Keywords

References

  1. 남정석, 김용기, 황종규, 한영재, 김현숙, “산업선 터널 및 공장 분진지역에서의 전철설비에 대한 안전대책연구, 한국철도기술연구원 보고서, 1996.
  2. 김영석, 송길목, 정진수, 정종욱, 김선구, “염수 및 분진에 의한 고분자 절연물의 표면누설전류 특성과 사고 위험성”, 한국조명전기설비학회, Vol. 21, No. 8, pp. 129-135, 2007. https://doi.org/10.5207/JIEIE.2007.21.8.129
  3. 송길목, 김영석, 김선구, “현장 분진포집에 의한 도전율 측정과 전기설비 위험평가”, 한국조명전기설비학회 추계학술대회, 2007.
  4. 김찬영 외 5, “비용해성 산업용 분진이 배전용 자기제 현수애자의 전기적 특성에 미치는 영향”, 대한전기학회 Vol. 50C, No. 4, pp. 183-189, 2001.
  5. KSC IEC 60507(교류시스템에 사용되는 고압애자의 인공오염 시험), 기술표준원, 2005.
  6. KSC 0223(환경시험방법(전기전자) 염수분무시험방법), 기술표준원, 2005.

Cited by

  1. Development of Coating Process Technique for Anti-Fouling Electric Insulator vol.904, pp.1662-9752, 2017, https://doi.org/10.4028/www.scientific.net/MSF.904.75