The Transactions of The Korean Institute of Electrical Engineers (전기학회논문지)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Output Characteristics for the Cantilever Piezoelectric Bimorph

Cantilever형 바이몰프 압전소자의 출력특성에 관한 연구

  • Published : 2010.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Using piezoelectric elements to harvest energy from ambient vibrations has been of great interest over the past few years. Due to the relatively low power output of piezoelectric materials, there are many study to improve the energy harvesting efficiencies. This paper is study the efficiencies of the output energy considering the cantilever piezoelectric bimorph using aluminum vibration beam. when the length of vibration beam and the piezoelectric body becomes same and the maximum output power comes out. DC voltage was increased as the beam thickness and vibration frequency was increased. The vibration beam was able to achieve very large energy value.

Keywords

References

  1. Roundy,S. "On the Effectiveness of Vibration-based Energy Harvesting," Journal of Intelligent Material Systems and Structures, Vol.16, No.10. pp.809-823, 2005 https://doi.org/10.1177/1045389X05054042
  2. Sodano, H. A,. Inman,D, J., and Park, G. "Comparison of Piezoelectric Energy Harvesting Devices for Recharging Batteries," Journal of Intelligent Material Systems and Structures. Vol. 16, No.10. pp.809-823, 2005 https://doi.org/10.1177/1045389X05054042
  3. Ng,T.H., and Liao, W. H. "Sensitivity Analysis and Energy Harvesting for a Self-powered Piezoelectric Sensor. Journal of Intelligent Material Systems and Structures. Vol.16, No.10. pp.785-797, 2005 https://doi.org/10.1177/1045389X05053151
  4. Ericka, M., Vasic, D., Costa, F., Poulin, G., and Tilba, S., "Energy Harvesting from Vibration using a Piezoelectric Membrane. Journal de Physique IV, Vol.128. pp.187-193, 2005 https://doi.org/10.1051/jp4:2005128028
  5. Lefeuvre, E., Badel, A., Benayad, A., Lebrun, L., Richard, C., and Guyomar, D., "A Comparison between Several Approches of Piezoelectric Energy Harvesting, Journal de Physique IV, Vol. 128. pp. 177-186, 2005 https://doi.org/10.1051/jp4:2005128027
  6. Umeda M, Nakamura K and Ueha S., "Analysis of the Transformation of Mechanical Impact Energy to Electric Energy using Piezoelectric Vibrator Japan. J. Appl. Phys. Vol. 35, pp.3267-3273. 1996 https://doi.org/10.1143/JJAP.35.3267
  7. Gonzalez, J. L, Rubio, A. and Moll, F. Human., "Powered Piezoelectric Batteries to Supply Power to Wearable Electronic Devices, Int. J.-Soc. Mater. Eng. Resources Vol.10, pp.34–40, 2001
  8. Lefeuvre, E., Badel, A., Richard, C., Petit, L., and Guyomar, D., A Compraision between Several Vibratin-Powered Piezoelectric Generators for Standalone Systems. Sensors and Actuators A - Physical. 126, 2, pp.405-416, 2006 https://doi.org/10.1016/j.sna.2005.10.043
  9. Shen, D., Ajitsaria J., Choe, S, Y., and Kim, D, J., "The Optimal Design and Analysis of Piezoelectric Cantilever Beams for Power Generation Devices., Mater. Res. Soc. Symp. Proc. V3, pp.888, 2006
  10. S.Roundy,E. Leland,J.Baker, E.Carleton.. "Improving Power Output in Vibration Based Energy Avengers" IEEE Pervasive Computing, Vol.4, pp.28-36, 2005