DOI QR코드

DOI QR Code

Numerical Investigation of the Effect of IR Heating on Drying Mechanism in a Tumble Dryer

열복사를 적용한 드럼 건조기의 건조 메커니즘 분석 및 성능 예측에 관한 연구

  • Published : 2010.03.01

Abstract

A two-dimensional mathematical model was developed to predict the temperature and moisture-content profiles of a tumble dryer during infrared drying. The model is based on the movements of liquid water and moisture in the object and on the fluid and heat transfer in the drying air. The model was solved by the finite volume analysis for the fluid, temperature, and radiation intensity fields. After deriving the governing equations and developing the two-dimensional tumble dryer models, numerical investigations were carried out to examine the effects of various parameters such as the heater temperature and the heating patterns on the drying mechanism of the tumble dryer. All the results show that the drying time can be reduced by using the IR heater.

텀블형 드럼 건조기의 적외선 건조 과정동안의 온도 및 수분량의 변화를 예측할 수 있는 2 차원 수학적 모델을 개발하였다. 본 모델에서는 건조대상 물질의 액체 수분의 이동과 건조공기의 유동 및 열전달을 고려하였다. 유체의 유동과 열전달 현상, 그리고 복사열전달은 유한체적법을 이용하여 해석하였다. 텀블 건조기의 2 차원 모델을 모사하기 위한 지배방정식을 소개한 후 적외선 히터, 히터의 온도, 그리고 가열 패턴에 따른 수치해석을 수행하였고, 적외선 히터를 도입함으로써 건조시간을 감소시킬 수 있음을 제시하였다.

Keywords

References

  1. Hekmat, D. and Fisk, W. J., 1983, “Improving the Energy Efficiency of Residential Clothes Dryers,”NTIS report number LBL 16813
  2. Ruiter, J. P., Leentvaar, G. and Zeylstra, A. H., 1978, “Tumbler Dryer with Heat Pump,” Elektrotechnik, Vol. 56, No. 4, pp. 224-229
  3. Bassily, A. M. and Colver, G. M., 2003, “Performance Analysis of an Electric Clothes Dryer,” Drying Technology, Vol. 21, No. 3, pp. 499-524 https://doi.org/10.1081/DRT-120018459
  4. Bassily, A.M. and Colver, G. M., 2005, “Numerical Optimization of The Annual Cost of a Clothes Dryer,” Drying Technology, Vol. 23, No. 7, pp. 1515-1540 https://doi.org/10.1081/DRT-200063541
  5. Deans J., “The Modeling of a Domestic Tumbler Dryer,” Applied Thermal Engineering, Vol. 21, No. 9,pp. 977-990
  6. Bansal, P. K., Braun, J. E. and Groll, E. A., 2001, “Improving The Energy Efficiency of Conventional Tumbler Clothes Drying Systems,” International Journal of Energy Research, Vol. 25, No. 15, pp. 1315-1332 https://doi.org/10.1002/er.752
  7. Hekmat, D. and Fisk, W. J., 1984, “Improving the Energy Performance of Residential Clothes Dryers,” The 35th Annual International Appliance Technical Conference, Ohio State University
  8. Beiron, J. and Brunzell, L., 2005, “Energy Efficiency and Drying Capacity of an Unheated or Partially Heated Air Vented Tumble Dryer,” Proceedings of the 3rd Nordic Drying Converence, Karlstad, Sweden.
  9. Conde, M. R., 1997, “Energy Conservation with Tumbler Drying in Laundries,” Applied Thermal Engineering, Vol. 17, pp. 1163-1172. https://doi.org/10.1016/S1359-4311(97)00031-8
  10. Kissling, H., 1992, “Computer Simulation of a Clothes Tumbler Dryer,” Department of Mechanical Engineering Report, University of Auckland.
  11. Berghel, J., Brunzell, L. and Bengtsson, P., 2004, “Perfomance Analysis of a Tumble Dryer,” Proceedings of the 14th International Drying Symposium IDS2004, Sao Paulo, Brazil, pp. 821-827.
  12. Brunzell, L., 2006, “Energy Efficient Textile Drying,” Universitetstryckeriet, Karlstad, 2006.
  13. Byun, D. Y., Baek, S. W. and Kim, M. Y., 2003, “Investigation of Raidative Heat Trnasfer in Complex Geometries using Blocked-Off, Multiblock, and Embedded Boundary Treatments,” Numerical Heat Transfer, Part A, Vol. 43, pp. 807-825 https://doi.org/10.1080/713838148
  14. Spolek, G. A. and Plumb, O. A., 1981, “Capillary Pressure of Woods,” Wood Science Technology, Vol.15, pp.150-158. https://doi.org/10.1021/es00084a606
  15. Stanish, M. A., 1986, “The Roles of Bound Water Chemical Potential and Gas Phase Diffusion in Moisture Transport Through Wood,” Wood Science Technology, Vol. 20, pp. 53-70. https://doi.org/10.1007/BF00350694
  16. Smith, T. F., Shen, Z. F. and Friedman, J. N., 1982, “Evaluation of Coefficients for the Weighted Sum of Gray Gases Model,” ASME Journal of Heat Transfer, Vol. 104, pp. 602-608. https://doi.org/10.1115/1.3245174
  17. Mujumdar, A. S. and Menon, A. S., 1995, “Drying of Solids : Princiles Classification and Selection of Dryers. In Handbook of Industrial Drying,” Mujumdar A. S. Marcel Dekker, Inc. New York, Vol. 2, pp. 1-40
  18. Haque. M. N., 2007, “Simulation of Temperature and Moisture Content Profiles in a Pinus Radiata Board during High-Temperature Drying,” Drying Technology, Vol. 25, pp. 457-555.
  19. Pang, S., 1996, “Moisture Content Gradient in a Softwood Board during Drying : Simulation from a 2-D Model and Measurement,” Wood Science and Technology, Vol. 30, pp. 165-178.