한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제9권1호
  • /
  • Pages.19-24
  • /
  • 2010
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지

소음기내의 버프 형상을 이용한 산업용 송풍기의 소음저감

The Noise Reduction of Industrial Blower Using Buff Shapes in Silencer

  • 김창호 (동의대학교 기계공학과) ;
  • 손인수 (동의대학교 기계공학과) ;
  • 안태수 (동의대학교 대학원 기계공학과) ;
  • 노태우 (동의대학교 대학원 기계공학과)
  • 투고 : 2009.11.24
  • 심사 : 2009.12.29
  • 발행 : 2010.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The noise of an running industrial fan or blower depends on the type of a fan, the machining accuracy and assembled conditions of each element, and buffs. Many studies have been carried out to reduce the noise through silencer in blower. In this study, 3 types of buffs which have different hole are employed in pipe of blower to study the influence the number and arrangement of buffs on the noise reduction at inlet and outlet in pipe. Commercial engineering software ANSYS was employed to analyze the characteristics and reduction ratio of pressure. Experimental results shows that optimal one can reduce the reduction ratio of noise as much as 16 percents in the laboratory. Good agreement was found between the analysed ratio of noise reduction and those obtained from the experiments.

키워드

과제정보

연구 과제 주관 기관 : 동의대학교

참고문헌

  1. Jung, J. N., Kim, W. J. and Cho, B. R., "Characteristies of Noise Attenuation with the Variation of Flow Condition and Hole Shape of Perforated Intruding Tubes in Muffler," Journal of KSPE, Vol. 16, No. 10, pp. 87-93, 1999.
  2. Song, S. H., Kim, H. R. and Chung, J. T., "A Study on Vibration Reduction of an Industrial Fan," Trans. of KSNVE, Vol. 10, No 3, pp. 457-464, 2000.
  3. Hwang, W. G., Lee, Y. Y., Oh, J. E., Kim, K. S. and Song, Y. H., "A Study on the Transmission Loss and Back Pressure of Muffler Elements," Journal of KSPE, Vol. 19, No. 7, pp. 147-153, 2002.
  4. Jeon, J. H. and Kim, Y. H., "Low Frequency Noise Reduction Inside Duct by Using Membrane," Trans. of KSNVE, Vol. 14, No. 11, pp. 1083-1090, 2004.
  5. Kim, Y. W. and Kim, B. S., "An Experimental Study on the Performance Improvement of Industrial Blower Silencer," Trans. of KSNVE, Vol. 15, No. 9, pp. 1060-1069, 2005.
  6. Kim, C. H., Son, I. S. and Ahn, T. S., "The Noise Reduction of Industrial Blower by Optimal Positioning of Buff." Journal of KSMPE, Vol. 8, No. 1, 71-76, 2009.
  7. Lee, K. T., Do, J. S. and Oh, J. E., "Analysis and Improvement for Performance of the Muffler of a Tracter," Trans. of KSAE, Vol. 6, No. 4, pp. 151-159, 1998.
  8. Munjal, M. L., Acoustics of Ducts and Mufflers, John Wiley & Sons, 1987.