Micro Milling using High Frequency 2-dimensional Vibration

2차원 고주파 진동을 이용한 미세 밀링가공

  • 김기대 (대구가톨릭대학교 기계자동차공학부)
  • Received : 2010.10.21
  • Accepted : 2010.12.02
  • Published : 2010.12.31

Abstract

Using two piezoelectric materials orthogonally arranged, 2-dimensional(2D) vibration in a excitation workpiece table was generated. In this study, micro milling using high frequency 2D vibration was proposed, whose locus of cutting tool is combined with original trochoid locus of milling tool and 2D elliptical locus of excitation table. From the cutting results of 2D vibrational micro milling of nickel alloy, it was observed that the machining quality and the roughness of machined surface were enhanced compared to conventional milling in a side cutting whose immersion ration is relatively low, whereas there was little betterment in a slot cutting.

Keywords

References

  1. Thoe, B., Aspinwall, K. and Wise, H., "Review on Ultrasonic Machining", International Journal of Machine Tools and Manufacture, Vol.38, No.4, pp.239-255, 1998. https://doi.org/10.1016/S0890-6955(97)00036-9
  2. Brehl, D. E. and Dow, T. A., "Review of vibration-assisted machining," Precision Engineering, Vol. 32, No. 3, pp. 153-172, 2008. https://doi.org/10.1016/j.precisioneng.2007.08.003
  3. Shamoto, E. and Moriwaki, T., "Study on Elliptical Vibration Cutting," Annals of the CIRP, Vol.43, pp.35-38, 1994. https://doi.org/10.1016/S0007-8506(07)62158-1
  4. Kim, G. D. and Loh, B. G., "Characteristics of Elliptical Vibration Cutting in Micro V-grooving with Variations of Elliptical Cutting Locus and Excitation Frequency." Journal of Micromechanics and Microengineering, doi:10.1088/0960-1317/18/2/025002, 2008.
  5. Kim, G. D., "Micro Milling using 2-dimensional Vibration," Journal of KSMPE, Vol. 9, No. 4, pp.38-43, 2010
  6. Moriwaki, T., Shamoto, E., Song, Y. C. and Kohda, S., "Development of a Elliptical Vibration Milling Machine," Annals of the CIRP, Vol. 53, No. 1, pp. 341-344, 2004. https://doi.org/10.1016/S0007-8506(07)60712-4
  7. Chern, G. L. and Chang, Y. C., "Using twodimensional vibration cutting for micro-milling." International Journal of Machine Tools and Manufacture Vol. 6, Issue 6, pp. 659-666, 2006.