A Study on Surface Roughness of Al alloy 7075 to Cutting depth in High-speed Machining

고속가공의 절삭 깊이에 따른 알루미늄 합금 7075의 표면 거칠기에 대한 연구

  • 박은식 (한국폴리텍VI대학 달성캠퍼스 컴퓨터응용기계학과)
  • Received : 2010.10.11
  • Accepted : 2010.12.09
  • Published : 2010.12.31

Abstract

Recently the industry high-speed machining has been applied to the automotive, aircraft, electronics parts machining because the effect of cost savings, machining time reduction and productivity improvement. In this study recently the aircraft structural aluminum alloy 7075 used in cutting the ball end-mill on the surface roughness terms most affect the parameters of the spindle speed and feed rate on the surface roughness of the work-piece according to the cutting depth is to investigate. Cutting depth at 0.3 mm has the lowest surface roughness.

Keywords

References

  1. H. J. Bae, S. J. Lee, Y. B. Seo, H. S. Park, "Topography Analysis in High Speed Working by Flat Endmill", KSMPE, Vol. 1, No. 1, pp. 79-88, 2002.
  2. K. H. Kim, D. W. LEE, H. S. Kang, M. C. Kang, J. S. Kim, "Study on the Tool Holding System for High Speed Machining of the Deep Pocket", KSMPE, Vol. 1, No. 1, pp. 38-47, 2002.
  3. P. Lim, G. E. Yang, "Optimal Cutting Condition of Tool Life in the High Speed Machining by Taguchi Design of Experiments", KSMPE, Vol. 5, No. 4, pp. 59-64, 2006.
  4. M. C. Shaw "Optimum Selection of Machine Tool: Speed and Feeds", Int. J. Mech. Des. Res. Vol. 5, pp. 25-34, 1965.
  5. J. N. Greenhow, C. Rubenstein, "The Dependence of Cutting Force on Feed and Speed in Orthogonal Cutting with Worn Tools" Int. J. Mach. Tool Des. Res. Vol. 9, pp. 1-16, 1969. https://doi.org/10.1016/0020-7357(69)90025-0
  6. Schulz, H. Hock, St., "High speed of Dies and Mouids-Cutting Conditions and Technology", CIRP, Vol. 43, pp. 63-67, 1994. https://doi.org/10.1016/S0007-8506(07)62165-9
  7. C. H. Yoo, J. H. Song, Y. H. Lee, "A Study on CAD/CAM Pocket Processing using the High Speed Machine", KSMPE, Vol. 3, No. 3, pp. 32-38, 2004.9
  8. Shamoto, E., Hatinas, Y., "Prediction of Shear Angle in Odlipus Cutting with Maximum Shear Stress and Technology", ASME, Vol. 1, PP. 121-128, 1997.
  9. Mustafizur Rahman, Md. Shamsuddin Chowdhung, "Influence of Different Tool Materials on High speed Machining of Hardened Tool Steel", The 5th Interna-tional Conference on Die and Mouid Technology, pp. 25-30, Singapore Expo, 21 to 23 March 2000.
  10. J. Wang, T. Kuriyagawa, X. P. Wei, D. M. Guo, "Optimization of cutting conditions for single pass turning operations using a deterministic approach", Int. J. of Machine Tools & Manufacture, Vol. 42, pp. 1023-1033, 2002. https://doi.org/10.1016/S0890-6955(02)00037-8