Characteristics of the Freezing and Thawing for Controlled Low-Strength Material Using Pond Ash

매립회를 활용한 저강도 고유동화재의 동결융해 특성

  • 현호규 (한양대학교 대학원 건설환경공학과) ;
  • 김현기 (한양대학교 대학원 건설환경공학과) ;
  • 천병식 (한양대학교 공과대학 건설환경공학과)
  • Received : 2010.05.24
  • Accepted : 2010.06.17
  • Published : 2010.07.01

Abstract

Recently, the land area for many people has been limited because of industrialization and modernization in Korea. The large-scale constructions like the reclamation development projects have been progressed to resolve this problem mentioned above. Therefore, as many of the useful construction materials as possible are needed to perform the largescale construction projects. Many studies for the utilization of pond ash which has a similar characteristic of sand have been conducted and there has been often occurred many structural problems on roadbed in winter. Therefore, the characteristics of the freezing and thawing for Controlled Low-Strength Material(CLSM) using pond ash were analyzed and evaluated by unconfined compressive strength test and mass loss test in this study. As a result of this study, it was confirmed that new CLSM using pond ash with cement(8.2% by weight) was able to stand for the freezing and thawing behavior and was satisfied with the standard of Portland Cement Association.

최근 우리나라는 산업화 및 현대화로 국토의 유효면적이 인구에 비해 부족한 실정이다. 이와 같은 문제점을 해결하기 위해 국가적인 대단위 국토개발을 수행하여 용지 확보에 노력을 기울이고 있다. 하지만 이러한 대규모공사를 진행함에 있어 모래와 같은 성토재 및 매립재 등이 부족한 실정이다. 이에 대한 대체재로 모래와 비슷한 특성을 가진 매립회의 활용에 관한 많은 연구가 진행되어왔고, 계절동토지역인 우리나라는 동결융해로 인해 철도 노반, 도로포장체 등 토목구조물이 파손되거나 기능이 저하되는 문제가 발생하고 있다. 따라서 본 연구에서는 매립회를 사용한 저강도 고유동화재의 동결융해의 특징을 동결융해 cycle 반복 후 공시체와 습윤양생 공시체의 일축압축시험과 손실율시험을 통해 비교분석 하였다. 비교분석결과 매립회를 활용한 저강도 고유동화재에 8.2%의 시멘트를 첨가했을 때, 소정의 강도가 발현되었으며, 내구성 또한 PCA기준에 만족하는 것으로 나타났다.

Keywords

Acknowledgement

Grant : 석탄회를 활용한 경량 유동성채움재(Flowable Fills) 제조공정 개발

Supported by : 한국에너지기술평가원(KETEP)

References

  1. 공진영, 강형남, 천병식(2010), 석탄회를 활용한 저강도 고유동화재의 일축압축강도 및 플로우 특성, 한국지반공학회논문집, Vol. 26, No. 1, pp. 75-83.
  2. 박재헌, 이관호, 조재윤, 김석남(2004), 현장발생토 CLSM을 이용한 지하매설관의 변형, 한국지반공학회논문집, Vol. 20, No. 3, pp. 129-139.
  3. 박흥규 김남옥 최문호(1999), 석탄폐석의 도로 성토재로서의 활용에 관한 연구, 대한토목학회논문집, Vol. 19, No. III-6, pp. 1143-1149.
  4. 원종필, 이용수(2001), Bottom Ash를 혼합한 저강도 고유동 충전재의 특성, 콘크리트학회논문집, Vol. 13, No. 3, pp. 294-300.
  5. 이관호, 송창섭(2006), 현장발생토사 재활용 유동성채움재를 이용한 지하매설관의 거동평가, 한국도로학회논문집, Vol. 8, No. 2, pp. 1-12.
  6. 이관호, 김주득, 현성철, 송용선, 이병식(2007), 해양준설토를 CLSM을 이용한 지하매설관 변형특성, 한국방재학회논문집, Vol. 7, No. 5, pp. 129-137.
  7. 임유진, 서창범(2009), 화강풍화토를 이용한 CLSM의 공학적 특성평가, 한국방재학회논문집, Vol. 9, No. 3, pp. 19-26.
  8. 조재윤, 이관호, 이인모(2000), 유동특성을 이용한 폐주물사 혼합물의 옹벽뒷채움재 연구, 한국지반공학회논문집, Vol. 16, No. 4, pp. 17-30.
  9. 최상용(1996), 화강암 풍화토의 물리.공학적 성질 및 동결.융해 특성에 관한 연구, 석사학위논문, 강원대학교, pp. 1-12.
  10. 환경부(2008), 제4차자원재활용기본계획, pp. 100-102.
  11. ACI Commitee 229 (1994), Contreolled Low Strength Materials (CLSM), American Concrete Institute, 229R-2, pp. 1-12.
  12. ASTM(2002), Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders, ASTM D 4832, American Society for Testing Materials, pp. 1-7.
  13. ASTM(2003), Standard Test Method for Freezing and Thawing Compacted Soil-Cement Mixtures, ASTM D 560, American Society for Testing Materials, pp. 1-7.
  14. Tarun R. Naik, Rudolph N. Kraus(2004), Properties of Flowable Self-Compacting Slurry Using Quarry By-Products and Ponded CCPs, Publication SP, pp. 523-538.
  15. TRB(2008), Development of a Recommended Practice for Use of Controlled Low-Strength Material in Highway Construction, NCHRP Report 597, U.S. Transportation Research Board, pp. 3-59.