초록
심미보철의 금속-도재관은 금속소재의 하부구조에 도재를 단계별로 소성하여 제작된다. 최근 새로운 기술인 SLM법을 이용하여 하부구조를 제작하고 있다. 본 연구에서는 금속-도재관의 하부구조를 주조법과 SLM법으로 제작하고 도재를 단계별로 소성하여 도재소성단계와 제작방법에 따른 색조변화를 측색기를 이용하여 관찰하였다. 도재의 소성단계에 따른 색조변화는 불투명도재 소성한 시편군(CN1, CC1, CT1, SC1, ST1)이 몸체도재소성 시편군(CN2, CC2, CT2, SC2, ST2)과 광택소성 시편군(CN3, CC3, CT3, SC3, ST3)과 색차(${\Delta}E$=30이상)를 나타냈다(p<0.05). 그리고 제작방법에 따른 색조관찰은 주조법으로 제작된 하부구조(CN, CC, CT)와 SLM법을 제작된 하부구조(SC, ST)간의 색차(${\Delta}E$=1.5이하)는 없는 것으로 나타났다. 따라서 도재의 소성단계에서는 몸체도재소성에서 색조가 표현되며, SLM법으로 제작된 금속-도재관의 색조는 임상적용이 가능한 것으로 판단된다.
The porcelain fused metal was made through the progressive fused process of porcelain on substructure of metal material. The substructure was made using novel SLM method. The objective of this study was to observe the color change of porcelain using spectrophotometer equipment according to porcelain fused step and production methods after conducting the process of casting and SLM method of the substructure. The color change by step was indicated that fused opaque porcelain groups(CN1, CC1, CT1, SC1, ST1) had color difference(${\Delta}E$=30) by comparison with fused body porcelain groups(CN2, CC2, CT2, SC2, ST2) and fused glazing porcelain groups(CN3, CC3, CT3, SC3, ST3) (p<0.05). and there was no color difference between the substrates(CN, CC, CT) made by the casting method and the substrates(SC, ST) made by the SLM method. so, the color change was expressed by fused change of porcelain, and this study showed that the color of porcelain fused metal made by the SLM method can be applied clinical trials.