초록
최근 플래시 메모리 기반 SSD(Solid State Disks)는 데이터 처리 속도가 빠르고, 외부 충격에 강하며 전력소모가 작다는 우수한 특성과 함께 그 용량의 증가와 가격 하락으로 인하여 차세대 저장 매체로 부각되고 있다. 하지만 SSD는 하드디스크와는 달리 읽기, 쓰기 및 지우기의 단위 및 수행 시간이 다르며 덮어쓰기가 불가능하다는 특징이 있다. 이 때문에 SSD는 기존의 하드디스크 기반 시스템 상에서는 그 동작의 효율성이 떨어지며, 이를 보완하기 위해 플래시 변환 계층이 설계되었다. 본 논문에서는 플래시 변환 계층의 역할 중 하나인 논리 주소 매핑 기법을 개선하여 SSD의 성능을 높일 수 있는 HAMM(Hybrid Address Mapping Method)를 제안한다. HAMM은 기존에 존재하는 슈퍼 블록 매핑 기법과 블록 매핑 기법의 단점을 보완하고 장점을 살릴 수 있도록 설계된 논리 주소 매핑 기법이다. SSD 시뮬레이터를 제작하여 실험하였으며, 실험을 통하여 HAMM은 같은 크기의 쓰기 버퍼 상에서 슈퍼 블록 매핑 기법에 비해 SSD의 저장공간을 효율적으로 사용하는 것으로 나타났으며, 또한 블록 매핑 기법에 비해 매핑 테이블을 구성하는데 적은 양의 메모리를 사용하면서 비슷한 성능을 보이는 것으로 나타났다.
Flash memory based SSDs are currently being considered as a promising candidate for replacing hard disks due to several superior features such as shorter access time, lower power consumption and better shock resistance. However, SSDs have different characteristics from hard disk such as difference of unit and time for read, write and erase operation and impossibility for over-writing. Because of these reasons, SSDs have disadvantages on hard disk based systems, so FTL(Flash Translation Layer) is designed to increase SSDs' efficiency. In this paper, we propose an advanced logical address mapping method for increasing SSDs' performance, which is named HAMM(Hybrid Address Mapping Method). HAMM addresses drawbacks of previous block-mapping method and super-block-mapping method and takes advantages of them. We experimented our method on our own SSDs simulator. In the experiments, we confirmed that HAMM uses storage area more efficiently than super-block-mapping method, given the same buffer size. In addition, HAMM used smaller memory than block-mapping method to construct mapping table, demonstrating almost same performance.