DOI QR코드

DOI QR Code

A Study on the Flow Characteristic of Lubrication Oil System in Manual Transmission System for Large Commercial Vehicle

대형 상용차용 수동변속기내 윤활시스템의 유동특성에 관한 연구

  • 이중섭 (경상대학교 BK사업단(첨단기계항공)) ;
  • 서정세 (경상대학교 기계항공공학부, ERI) ;
  • 송철기 (경상대학교 기계항공공학부) ;
  • 신유인 (경상대학교 대학원) ;
  • 윤지훈 (경상대학교 대학원) ;
  • 정경택 (한국승강기대학 승강기기계설계과)
  • Received : 2010.10.01
  • Accepted : 2010.11.10
  • Published : 2010.12.01

Abstract

This study has conducted numerical analysis for lubrication system of transmission for commercial vehicle. The lubrication oil system in transmission can be applied to a large scale commercial vehicle which is over 15tons. The flow rate of lubricating oil has been obtained for each of branch port from the lubrication pipe. The results from numerical simulation are mainly suggested for the mass flow rate of lubrication oil in the rotating main shaft of transmission system. It has been found that the mass flow rate from oil hole increased with an rotating rate of main shaft. The flow characteristic from oil hole has been presented for the lubricating system in the manual transmission.

Keywords

References

  1. Junsu Park, Haksu Kim, Duckjea Lee, Siyoul Jang and Kwansoo Han, 2006, "A Study on the Transmission Fluid Flow in the Main Shaft of the Automatic Transmission," Proceeding of the 2006 KSAE Spring Annual Meeting, pp. 2427-2432.
  2. Junsu Park, Daehwan Oh, Duckjae Lee, Haksu Kim, Siyoul Jang, Kwansoo Han and Jin-Sung Kim, 2007, "A study on the Lubrication Behaviors of Automatic Transmission Fluid inside the Main Shaft through the Oil Holes by Fluent," Proceeding of the 2007 KSAE Spring Annual Meeting, pp. 547-552.
  3. Dong Hoon Park, Tae Seok Seo, Do Gi Lim, Hee Bock Cho, 1996, "Theoretical Investigation on Automatic Transmission Efficiency," SAE, pp. 49-62.
  4. Michael A Kluger, Douglas R. Fussner, Bob Roethler, 1996, "A Performance Comparison of Various Automatic Transmission Pumping Systems," SAE, pp. 33-40.
  5. Sangmyung Chun, Younghwan Park, Siyoul Jang, 2000, "A Study on Effects of Aerated Engine Oil on Engine Lubrication System by Changing Lubrication Related Parts," KSAE Fall Annual Meeting, pp. 433-438.
  6. Seungyong Yang, Sungjong Cha, 2005, " Simulation of Cavitating Flow in a Gerotor Oil Pump," KSAE Fall Annual Meeting, pp. 599-604.
  7. Jiang, Y and Perng, C. Y., 1997, "An Efficient 3D Transient Computational Model for Vane Oil Pump and Gerotor Oil Pump Simulations," SAE-970841, pp. 91-100.