DOI QR코드

DOI QR Code

Vibration Analysis of Rotating Blades with the Cross Section Taper Considering the Pre-twist Angle and the Setting Angle

초기 비틀림각 및 장착 각의 영향을 고려한 단면 테이퍼진 회전 블레이드의 진동해석

  • 이준희 (한양대학교 대학원 기계공학과) ;
  • 유홍희 (한양대학교 기계공학부)
  • Published : 2010.01.20

Abstract

Equations of chordwise and flapwise bending motions for the vibration analysis of rotating pre-twisted blades having tapered cross section and setting angle are derived by using hybrid deformation variable modeling. The two motions are couples to each other due to the pre-twisted angle of the beam cross section. The derived equations are transformed into dimensionless forms in which dimensionless parameters are identified. The effects of the dimensionless parameters on the modal characteristics of rotating pre-twisted blades having tapered cross section and orientation angle are investigated. The eigenvalue loci veering phenomena are also investigated and discussed in this work.

Keywords

References

  1. Southwell, R. and Gough, F., 1921, “The Free Transverse Vibration of Airscrew Blades,” British A.R.C. Reports and Memoranda No. 766.
  2. Schilhansl, M., 1958, “Bending Frequency of a Rotating Cantilever Beam,” J. of Appl. Mech. Trans. Am. Soc. Mech. Engrs, 25, pp. 28-30.
  3. Putter, S. and Manor, H., 1978, “Natural Frequencies of Radial Rotating Beams,” J. Sound and Vibration, Vol. 56, No. 2, pp. 175-185. https://doi.org/10.1016/S0022-460X(78)80013-3
  4. Buffinton, K. and Kane, T., 1985, “Dynamics of a Beam Moving Over Supports,” International Journal of Solids and Structures, Vol. 21, No. 7, pp. 617-643. https://doi.org/10.1016/0020-7683(85)90069-1
  5. Kane, T., Ryan, R. and Banerjee, A., 1987, “Dynamics of Cantilever Beam Attached to a Moving Base,” Journal of Guidance, Control and Dynamics, Vol. 10, No. 2, pp. 139-151. https://doi.org/10.2514/3.20195
  6. Lai, S., 1994, “Nonlinear Finite Element modeling of a High Speed Rotating Timoshenko Beam Structure,” International Journal of Mechanical Science, Vol. 36, No. 9, pp. 849-861. https://doi.org/10.1016/0020-7403(94)90013-2
  7. Lee, S. Y. and Kuo, Y. H., 1991, “Elastic Stability of Non-uniform Columns,” Journal of Sound and Vibration, Vol. 148, No. 1, pp. 11-24. https://doi.org/10.1016/0022-460X(91)90818-5
  8. Rossi, R. E., Laura, P. A. and Gutierrez, R. H., 1990, “A Note on Transverse Vibrations of a Timoshenko Beam of Non-uniform Thickness Clampes at One End and Carrying a Concentrated Mass at the Other,” Journal of Sound and Vibration, Vol. 143, No. 3, pp. 491-502. https://doi.org/10.1016/0022-460X(90)90738-L
  9. Kane, T. and Levinson, D., 1985, Dynamics : Theory and Applications, McGraw-Hill Book Co., NewYork, N.Y.
  10. Yoo, H. H., 1991, “A Linear Dynamic Modeling using Hybrid Deformation Variables for Rotating Structures,” J. of KSAS, Vol. 19, No. 3, pp. 32-39.
  11. Yoo, H. H., 1998, “Vibration Analysis of Rotating Cantilever Beams,” Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 8, No. 5, pp. 765-774.
  12. Yoo, H., Ryan, R. and Scott, R., 1995, “Dynamics of flexible Beams Undergoing Over-all Motions,” Journal of Sound and Vibration, Vol. 181, No. 2, pp. 261-278. https://doi.org/10.1006/jsvi.1995.0139
  13. Carnegie, W. and Thomas, J., 1972, “The Coupled Bending-bending Vibration of Pre-twisted Tapered Blading,” Journal of Engineering for Industry, Vol. 94, pp. 255-266. https://doi.org/10.1115/1.3428120
  14. Dokumaci, E., Thomas, J. and Carnegie, W., 1967, “Matrix Displacement Analysis of Coupled Bending-bending Vibrations of Pre-twisted Blading,” Journal of mech. Eng. Sci, Vol. 9, pp. 247-51. https://doi.org/10.1243/JMES_JOUR_1967_009_039_02
  15. Ramamurti, V. and Kielb, R., 1984, “Natural Frequencies of Twisted Rotating Plates,” Journal of Sound and Vibration, Vol. 97, pp. 429-49. https://doi.org/10.1016/0022-460X(84)90271-2
  16. Leissa, A., 1974, “On a Curve Veering Aberration,” Journal of Applied Mathematics and Physics (ZAMP), Vol. 25, pp. 99-11. https://doi.org/10.1007/BF01602113

Cited by

  1. Vibration Analysis of Rotating Pre-twisted Inward Beams with a Concentrated Mass vol.25, pp.6, 2015, https://doi.org/10.5050/KSNVE.2015.25.6.384