DOI QR코드

DOI QR Code

액체로켓엔진 연소기를 이용한 고고도 환경 모사용 디퓨저 시동특성 연구

An Experimental Study of a Diffuser Starting Characteristics for Simulating High-Altitude Environment by using a Liquid Rocket

  • 이양석 (충남대학교 항공우주공학과) ;
  • 전준수 (충남대학교 항공우주공학과) ;
  • 고영성 (충남대학교 항공우주공학과) ;
  • 김유 (충남대학교 기계공학과) ;
  • 김선진 (청양대학 소방안전관리학과)
  • 투고 : 2010.07.06
  • 심사 : 2010.11.19
  • 발행 : 2010.12.01

초록

본 연구에서는 액체 로켓 엔진의 고온 연소 가스를 이용하여 축소형 고고도 환경 모사용 초음속 디퓨저 성능 실험을 수행하였다. 실험 장치는 연소실, 진공 챔버, 디퓨저로 구성되어 있다. 고고도 환경 모사 시험은 연소실 압력이 약 26, 29, 32barg 세 조건으로 수행하였고, 세가지 조건에서 모두 디퓨저는 성공적으로 시동되었으며 진공 챔버 압력이 약 140torr로 형성하였다. 이전의 상온 고압 가스를 이용한 디퓨저의 시동 특성과 비교하였을 때 시동 압력과 압력 분포 등의 시동 특성의 경향성은 유사하였으나, 고온 환경으로 인하여 진공 챔버에 형성되는 압력은 2배 정도 높은 것을 확인하였다. 본 연구 결과는 향후 실물형 고고도 환경 모사 시험 설비를 구축하는데 기초 자료로 활용될 수 있을 것으로 판단된다.

Performance tests of a supersonic exhaust diffuser were conducted by using a liquid rocket engine for simulating high-altitude environment. The experimental setup consisted of a combustion chamber, a vacuum chamber and a diffuser. The combustion tests for simulating high-altitude environment were carried out at three cases by chamber pressure variation(26, 29, 32barg). The test results showed that the diffuser was started at all case and vacuum chamber pressures were approximately 140torr. The starting pressure using combustion gas was similar with that of cold gas, but the vacuum chamber pressure was relatively high because of high temperature in the vacuum chamber. The results of this test can be used as an essential database for the design of real-scale high-altitude simulation test facility in the future.

키워드

참고문헌

  1. Sivo, J. N., Meyer, C. L. and Peters, D. J., “Experimental Evaluation of Rocket Exhaust Diffusers for Altitude Simulation”, NASA-TN-D-298, 1960.
  2. William, L. J. Harold, G. P. and Car F. L., "Experimental study of zero-flow ejectors using gaseous nitrogen", NASA-TN-D-203, 1960.
  3. Annamnalai, K., Visvanathan, K., Sriramulu, V. and Bhaskaran, K.A. "Evaluation of the performance of supersonic exhaust diffuser using scaled down model", Experimental Thermal and Fluid Science, 17, 1998, pp. 271-229. https://doi.org/10.1016/S0894-1777(98)00002-8
  4. Annamalai, K., Satyanarayana, T., Sriramulu, V. and Bhaskaran, K. A., “Development of design methods for short cylindrical supersonic exhaust diffuser”, Experiment in Fluids, Vol. 29, 2000, pp. 305-308. https://doi.org/10.1007/s003489900071
  5. 이지형, 오종윤, 박익수, “고고도 모사용 소형시험장치 연구”, 한국군사과학기술학회지, 제7권 제4호, 2004, pp. 133-137.
  6. 이지형, 오종윤, 변종렬, “소형 초음속 디퓨저를 이용한 고고도환경 모사에 대한 시험적 연구”, 한국군사과학기술학회지, 제7권 제4호, 2004, pp. 138-145.
  7. 박병훈, 박성현, 윤웅섭, “고도 모사용 초음속 디퓨저의 진공 성능 및 천이작동 특성”, 대한기계학회 추계학술대회, 2007, pp. 7-12.
  8. 이양석, 전준수, 고영성, 양재준, “고고도 환경 모사용 축소형 디퓨저 설계 및 시동 특성 연구”, 한국추진공학회지, 제13권, 제5호, 2009, pp. 21-28.