초록
본 연구에서는 말뚝재료의 항복거동 및 기하학적 비선형 거동인 P-${\Delta}$ 효과를 고려한 변단면 단일 현장타설말뚝의 거동특성을 분석하였다. 이를 위하여 실제 시공된 현장타설말뚝에 대한 말뚝재료의 균열 휨모멘트 및 균열 수평하중을 산정하였고, 국내 외에서 적용하고 있는 대표적인 수평변위 기준과의 비교분석을 수행하였다. 또한 구조적 특성을 파악하기 위하여 설계자료를 토대로 재료 및 지반조건을 반영한 현장타설말뚝의 거동을 예측하여 변단면 설계의 타당성을 검토하였다. 분석 결과, 재료의 항복거동과 P-${\Delta}$ 효과 고려시, 이를 고려하지 않는 경우와 비교하여 최대 모멘트가 지표면 부근에서 발생하여 소성힌지 위치에 영향을 주는 것을 나타났으며, 말뚝의 재료파괴는 주로 기둥부의 단면적이 작은 말뚝-기둥 접합부에서 발생하는 것을 알 수 있었다. 또한 주로 말뚝이 수평변위 기준에 도달하기 전에 재료의 파괴가 먼저 발생하기 때문에 말뚝의 항복효과를 고려해야 함을 알 수 있었다. 본 연구 결과, 변단면 단일 현장타설말뚝의 설계 시 불확실성을 고려하여 지지력을 과소평가하고 있는 것으로 나타났으며, 말뚝재료의 항복거동 및 기하학적 비선형 거동인 P-${\Delta}$ 효과를 고려한 해석기법을 통하여 거동특성을 정확히 예측한다면 경제적인 설계가 가능할 것으로 판단되었다.
In this study, the behavior of Pile-Bent structure with varying diameters subjected to lateral loads were evaluated by a load transfer approach. An analytical method based on the beam-column model and nonlinear load transfer curve method was proposed to consider material non-linearity (elastic, yielding) and P-${\Delta}$ effect. For an effective analysis of behavior Pile-Bent structure, the bending moment and fracture lateral load of material were evaluated. And special attention was given to lateral behavior of Pile-Bent structures depending on reinforcing effect of materials and ground conditions. Based on the parametric study, it is shown that the maximum bending moment is located within a depth (plastic hinge) approximately 1~3D (D: pile diameter) below ground surface when material non-linearity and P-${\Delta}$ effect are considered. And distribution of the lateral deflections and bending moments on a pile are highly influenced by the effect of yielding. It is also found that this method considering material yielding behavior and P-${\Delta}$ effect can be effectively used to perform the preliminary design of Pile-bent structures.