Abstract
On the SSang-chi gauging station, the discharge had been measured by the rod float method for the past twelve years. However the shifts of the rating curves are too big to be accepted. The major factors of rating curve variation were reviewed for shift analysis. To estimate the discharge measured by rod float method, two cross sections and their stages are generally required. But, the rating curves had been derived only with the observed depth of gauging station since the cross sections were not available. To correct the errors, the reference rating curve was developed. In this study, the water surface slopes of the curve were simulated by RMA2 model. The historical rating curves were re-developed by the calculated discharges on the base of the water surfaces. The results show that the range of fluctuation decreased and rating curves in recent years are physically reasonable.
쌍치 수위관측소는 과거 12년 동안 봉부자로 유량을 측정해왔다. 그러나 수위-유량관계곡선의 전이가 수용할 수 없을 만큼 너무 크다. 전이를 분석해 보기 위하여 주요인자들을 검토하였고, 특히 부자법에 의한 유량 산정을 위해서는 두 단면이 필요하나, 상 하단측선의 관측수위가 없어 수위관측소의 수위만을 사용하여 계산된 오류를 교정하였다. 이를 위해서 기준 수위-유량관계곡선을 작성하였다. 본 연구에서는 기준 수위-유량관계곡선에 대하여 RMA2모형으로 수면곡선을 모의하였다. 이를 바탕으로 기존유량을 재 산정하여 기존 수위-유량관계곡선을 재 작성하였다. 그 결과 전이의 변동 폭이 줄어들었으며 최근의 수위-유량관계곡선이 물리적으로 합당함을 확인하였다.