대한조선학회논문집 (Journal of the Society of Naval Architects of Korea)

  • 제47권6호
  • /
  • Pages.808-812
  • /
  • 2010
  • /
  • 1225-1143(pISSN)
  • /
  • 2287-7355(eISSN)
대한조선학회 (The Society of Naval Architects of Korea)
권호 표지
DOI QR코드

DOI QR Code

선박 장비 받침대의 동강성 평가를 위한 유한요소 모델링과 해석 인자에 관한 연구

A Study on the Finite Element Modeling and Analytical Parameters for the Dynamic Stiffness Evaluation of Shipboard Equipment Foundations

  • 김국현 (동명대학교 조선공학과) ;
  • 김윤환 (부산대학교 조선해양공학과) ;
  • 최태묵 ((주)크리에이텍) ;
  • 최성원 (부산대학교 조선해양공학과) ;
  • 조대승 (부산대학교 조선해양공학과)
  • Kim, Kook-Hyun (Dept. of Naval Architecture, Tongmyong University) ;
  • Kim, Yun-Hwan (Dept. of Naval Architecture and Ocean Engineering, Pusan National University) ;
  • Choi, Tae-Muk (Createch Co. Ltd.) ;
  • Choi, Sung-Won (Dept. of Naval Architecture and Ocean Engineering, Pusan National University) ;
  • Cho, Dae-Seung (Dept. of Naval Architecture and Ocean Engineering, Pusan National University)
  • 투고 : 2010.07.19
  • 심사 : 2010.10.14
  • 발행 : 2010.12.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper studies the finite element modeling and analytical parameters for the numerical evaluation of dynamic stiffness of large foundation for shipboard equipments such as marine diesel engine. For the purpose, numerical method and procedure to evaluate the dynamic stiffness are established based on the impact test method, which are applied for the dynamic stiffness evaluation of a real diesel generator foundation of ship. Numerical investigations compared with the measured data are carried out to evaluate the effects of modeling ranges of ship substructure, finite element sizes, lower support structures and damping coefficients. From the results, modeling and analytical parameters for proper evaluation of dynamic stiffness of large foundation of shipboard equipment are suggested.

키워드

참고문헌

  1. Han, H.S. & Son, Y.J., 2009. Numerical Analysis of the Mechanical Impedance and Transmitted Vibration of the Foundation for the Equipment in a Naval Vessel. Transactions of the Korean Society for Noise and Vibration Engineering, 19(5), pp.462-467. https://doi.org/10.5050/KSNVN.2009.19.5.462
  2. Kim, K.C. et al., 1997. Control of Ship Vibration and Noise. Korean Register of shipping.
  3. Kim, H.S. Kang, H.J. Kim, B.K. & Kim, S.R., 2007. A Study on Structure-Borne Noise Reduction for Resiliently Mounted Pumps for Ship. Journal of the Society of Naval Architects of Korea, 44(5), pp.488-495. https://doi.org/10.3744/SNAK.2007.44.5.488
  4. Kim, H.S. et al., 2008. Impedance Analysis of Chiller Foundation for Ships. Proceedings of the KSNVE Annual Spring Conference, 17-18 April 2008, pp.106-109.
  5. Lee, H.Y. et al., 2009. An Experimental Study on the Vibration of Rubber Mounts for Naval Shipboard Equipments. Journal of the Society of Naval Architects of Korea, 46(2), pp. 165-170. https://doi.org/10.3744/SNAK.2009.46.2.165
  6. MSC, 2004. MSC. Nastran 2005 Installation and Operations Guide. MSC.Software Corporation.
  7. Park, C.S. Seol, H.S. & Moon, I.S., 2010. Study on International Trends for Shipping Underwater Noise Regulation. Proceedings of 2010 KAOST, Jeju, 3-4 June 2010, pp.1188-1195.
  8. Shin, Y.S. & Ham, I.B., 2003. Damping Modeling Strategy for Naval Ship System. Naval Postgraduate School, Report No. NPS-ME-03-003.
  9. Youn, J.H., 2005. A Study on Investigation and Countermeasure for Troubled Vibration and Noise at Large Merchant Ships. Master Thesis, Pusan National University.