References
- Q. Schiermeier, “Methane finding baffles scientists,”Nature, vol. 439, p. 128, 2006. https://doi.org/10.1038/439128a
-
C. Lu, Z. Chen, and V. Singh, "Highly hydrogen-sensitive
$SnO_2$ nanoscale-particle films with platinum electrodes,” Sensors and Actuators B, vol. 146, pp. 145-153, 2010. https://doi.org/10.1016/j.snb.2010.02.034 - S. Santra, P.K. Guha, S.Z. Ali, P. Hiralal, H.E. Unalan, J.A. Convington, G.A.J. Amaratunga, W.I. Milne, J.W. Gardner, and F. Udrea, “ZnO nano wires grown on SOI CMOS substrate for ethanol sensing,” Sensors and Actuators B, vol. 146, pp. 559-565, 2010. https://doi.org/10.1016/j.snb.2010.01.009
-
L.V. Thong, N.D. Hoa, D.T. Thanh Le, D.T. Viet, P.D. Tam, A.T. Le, and N.V. Hieu, “On-chip fabrication of
$SnO_2$ -nanowire gas sensor : The effect of growth time on sensor performance,” Sensors and Actuators B, vol. 146, pp. 361-367, 2010. https://doi.org/10.1016/j.snb.2010.02.054 - K. Chatterjee, S. Chatterjee, A. Banerjee, M. Raut, N.C. Pal, A. Sen, and H.S. Maiti, “The effect of pall adium incorporation on methane sensitivity of antimony doped tin oxide,” Materials Chemistry and Physics, vol. 81, pp. 33-38, 2003. https://doi.org/10.1016/S0254-0584(03)00145-7
-
S.H. Hahn, N. Barsan, and U. Weimar, “Investigation of
$CO/CH_4$ mixture measured with differently doped$SnO_2$ sensors,” Sensors and Actuators B, vol. 78, pp. 64-68, 2001. https://doi.org/10.1016/S0925-4005(01)00792-4 - N.J. Choi, T.H. Ban, J.H. Kwak, Y.T. Lim, B.S. Joo, J.C. Kim, J.S. Huh, and D.D. Lee, “Thin film gas sensors based on tin oxide for acetonitril,” J. Kor. Sensors Soc., vol. 13, pp. 218-223, 2004. https://doi.org/10.5369/JSST.2004.13.3.218
- Y.W. Park, H.Y. Shin, and S.J. Yoon, “3- dimensional nanostructured ZnO gas sensor,” J. Kor. Sensors Soc., vol. 19, pp. 356-360, 2010. https://doi.org/10.5369/JSST.2010.19.5.356
- D. Kohl, “Function and application of gas sensors,” Jounal of Physics D:Applied Physics, vol. 34, pp. 125-149, 2001.
- J. Puigcorbe, D. Vogel, B. Michel, A. Vila, I. Gracia, C.Cane, and J.R. Morante, “Thermal and mechanical analysis of micromachined gas sensor,” Journal of Micromechanics and Microengineering, vol. 13, pp. 548-556, 2003. https://doi.org/10.1088/0960-1317/13/5/304
- K.D. Mitzner, J. Sternhagen, and D.W. Galipeau, “Development of micromachined hazardous gas sensor array,” Sensors and Actuators B, vol. 93, pp. 92-99, 2003. https://doi.org/10.1016/S0925-4005(03)00244-2
- J.S. Suehle, R.E. Cavicchi, M. Gaitan, and S. Semancik, “Tin oxide gas sensor fabricated using CMOS micro-hotplates and in situ processing,” IEEE Electron Device Letters, vol. 14, pp. 118-120, 1993. https://doi.org/10.1109/55.215130
- J.A. Salcedo, J.J. Liou, M.Y. Afridi, and A.R. Hefner Jr, “On-chip electrostatic discharge protection for CMOS gas sensor systems-on-a-chip(soc),” Microelectronics Reliability, vol. 46, pp. 1285-1294, 2006. https://doi.org/10.1016/j.microrel.2005.12.002
- X. Lafontan, F. Pressecq, F. Beaudoin, and S. Rigo, et al., “The advent of MEMS in space,” Microelectronics Reliability, vol. 43, pp. 1061-1083, 2003. https://doi.org/10.1016/S0026-2714(03)00120-3
- E. Comini, G. Faglia, G. Sberveglieri, Z. Pan, and Z.L. Wang, “Stable and higly sensitive gas sensors based on semiconducting oxide nanobelts,” Appl. Phys. Lett, vol. 81, pp. 1869-1871, 2002. https://doi.org/10.1063/1.1504867
- Z.L. Wang, “Nanobelts, nanowires, and nano diskettes of semiconducting oxieds,” Materials to nanodevices, Adv. Mater, vol. 15, pp. 432-436, 2003. https://doi.org/10.1002/adma.200390100
-
C.M. Carney, S. Yoo, and S.A. Akbar, “
$TiO_2-SnO_2$ nanostructures and their$H_2$ sensing behavior,” Sensors and Actuators B, vol. 108, pp. 29-33, 2005. https://doi.org/10.1016/j.snb.2004.11.058 -
N. Yamazoe, J. Fuchigami, M. Kishikawa, and T. Seiyama, “Interactions of tin oxide surface with
$O2,\;H_2O\;and\;H_2$ ,” Surface Science, vol. 86, pp. 335-344, 1979. https://doi.org/10.1016/0039-6028(79)90411-4