참고문헌
- C. S. Shin, D. Gall, N. Hellgren, J. Patscheider, I. Petrov, and J. E. Greene, “Vacancy Hardening in Single-crystal TiNx(001) Layers,” J. Appl. Phys., 93 [5] 6025-28 (2003). https://doi.org/10.1063/1.1568521
- L.W. Ma, J.M. Cairney, Hoffman, and P. R. Monroe, “Three Dimensional Imaging of Deformation Modes in TiN-based Thin Film Coatings,” Thin Solid Films., 515 [2] 3190-95 (2007). https://doi.org/10.1016/j.tsf.2006.01.034
- I. Iordanova, P. J. Kelly, R. Mirchev, and Antonov, “Crystallography of Magnetron Sputtered TiN Coatings on Steel Substrates,” Vacuum, 81 [2] 830-42 (2007). https://doi.org/10.1016/j.vacuum.2006.09.018
- I. Petrov, P.B. Barna, L. Hultman, and J. E. Greene, “Microstructural Evolution During Film Growth,” J. Vac. Sci. Technol., A, 21 [9] S117-18 (2003). https://doi.org/10.1116/1.1601610
- P. J. Kelly, T. Braucke, Z. Liu, R.D. Arnell, and E.D. Doyle, “Pulsed DC Titanium Nitride Coatings for Improved Tribological Performance and Tool Life,” Surf. Coat. Tech., 202 [12] 774-80 (2007). https://doi.org/10.1016/j.surfcoat.2007.07.047
- J. R. Roth, Industrial Plasma Engineering, pp. 256-58, Institute of Physics and Publishing, London, 2001.
- I. Petrov, L. Hultman, U. Helmersson, S. A. Barnett, J. E. Sundgren, and J. E. Greene, “Microstructure Modification of TiN by Ion Bombardment During Reactive Sputter Deposition,” Thin Solid Films, 169 [2] 299-314 (1989). https://doi.org/10.1016/0040-6090(89)90713-X
- H. Ljungcrantz, L. Hultman, J. E. Sundgren, and L. Karlsson, “Ion Induced Stress Generation in Arcevaporated TiN Films,” J. Appl. Phys., 78 [2] 832-37 (1995). https://doi.org/10.1063/1.360272
- J. Pelleg, L.Z. Zevin, and S. Lungo, “Reactive-sputter-deposited TiN Films on Glass Substrates,” Thin Solid Films, 197 [3] 117-28 (1991). https://doi.org/10.1016/0040-6090(91)90225-M
- P. H. Mayrhofer, C. Mitterer, L. Hultman, and H. Clemens, “Microstructural Design of Hard Coatings,” Prog. Mater. Sci., 51 [11] 1032-114 (2006). https://doi.org/10.1016/j.pmatsci.2006.02.002
- B. D. Cullity and S.R. Stock, “Elements of X-Ray Diffraction,” 3rd. Ed., pp. 167-71, Prentice-Hall Inc., 2001.
- F. J. Humphreys and M. Hatherly, “Recrystallization and Related Annealing Phenomena,” pp. 27-55, Elsevier Science, 1995.
- J. W. Lee, S. K. Tien, and Y.C. Kuo, “The Effects of Pulse Frequency and Substrate Bias to the Mechanical Properties of CrN Coatings Deposited by Pulsed DC Magnetron Sputtering,” Thin Solid Films, 494 [1] 161-67 (2006). https://doi.org/10.1016/j.tsf.2005.07.190
- P. H. Mayrhofer, G. Tischler and C. Mitterer, “Microstructure and Mechanical/thermal Properties of Cr - N Coatings Deposited by Reactive Unbalanced Magnetron Sputtering,” Surf. Coat. Tech., 142-44 [7] 78-84 (2001). https://doi.org/10.1016/S0257-8972(01)01090-8
-
S. Kim, D. M. Kim, S. Kang, H. J. Kim, and H. T. Kim, “Hardness of Constituent Phases in Ti(
$C_{0.7}N_{0.3}$ )-WC-Ni Cermets Measured by Nanoindentation,” J. Kor. Ceram. Soc., 46 [2] 116-21 (2009). https://doi.org/10.4191/KCERS.2009.46.1.116 - V. Chawla, R. Jayaganthan, and R. Chandra, “Structural Characterizations of Magnetron Sputtered Nanocrystalline TiN Thin Films,” Mater. Characterization, 59 [8] 1015-20 (2008). https://doi.org/10.1016/j.matchar.2007.08.017
피인용 문헌
- Mechanical Behavior of Layered YSZ Thermal Barrier Coatings using Indentation Test vol.48, pp.5, 2011, https://doi.org/10.4191/kcers.2011.48.5.396
- A Comparative Study of Superhard TiN Coatings Deposited by DC and Inductively Coupled Plasma Magnetron Sputtering vol.46, pp.2, 2013, https://doi.org/10.5695/JKISE.2013.46.2.055
- A Comparative Study of CrN Coatings Deposited by DC and Pulsed DC Asymmetric Bipolar Sputtering for a Polymer Electrolyte Membrane Fuel Cell (PEMFC) Metallic Bipolar Plate vol.50, pp.6, 2013, https://doi.org/10.4191/kcers.2013.50.6.390
- Effects of Duty Cycle and Pulse Frequency on the Microstructure and Mechanical Properties of TiAlN Coatings vol.51, pp.5, 2014, https://doi.org/10.4191/kcers.2014.51.5.447
- Effect of Working Pressure and Substrate Bias on Phase Formation and Microstructure of Cr-Al-N Coatings vol.54, pp.6, 2017, https://doi.org/10.4191/kcers.2017.54.6.05