References
- J. I. Weon and H. J. Sue, Polymer, 46, 6325 (2005) https://doi.org/10.1016/j.polymer.2005.05.094
- H. S. Jin, J. H. Chang, and J. C. Kim, Macromol. Res., 16, 503 (2008) https://doi.org/10.1007/BF03218551
- H. J. Sue, K. T. Gam, N. Bestaoui, N. Spurr, and A. Clearfield, Chem. Mater., 16, 242 (2004) https://doi.org/10.1021/cm030441s
- T. Y. Hwang, J. W. Lee, S. M. Lee, and G. J. Nam, Macromol. Res., 17, 121 (2009) https://doi.org/10.1007/BF03218665
- M. Choi, B. Lim, and J. Jang, Macromol. Res., 16, 200 (2008) https://doi.org/10.1007/BF03218853
- P. D. Shepherd, F. J. Golemba, and F. W. Maine, Adv. Chem. Ser., 134, 41 (1974) https://doi.org/10.1021/ba-1974-0134.ch005
- A. Okada, Y. Fukushima, M. Kawasumi, S. Inagaki, A. Usuk, S. Sugiyami, T. Kurauchi, and O. Kamigaito, US Patent 4739007 (1988)
- M. Kawasumi, M. Kohzaki, Y. Kojima, A. Okada, and O. Kamigaito, US Patent 4810734 (1989)
- A. Usuki, Y. Kojima, M. Kawasumi, A. Okada, Y. Fukushima, T. Kurauchi, and O. Kamigaito, J. Mater. Res., 8, 1179 (1993)
- Y. Wang, L. Zhang, C. Tang, and D. Yu, J. Appl. Polym. Sci., 78, 1878 (2000)
- X. Fu and S. Qutubuddin, Polymer, 42, 807 (2001) https://doi.org/10.1016/S0032-3861(00)00385-2
-
G. M. Kim, D. H. Lee, B. Hoffmann, J. Kressler, and G. St
\ddot{o} ppelmann, Polymer, 42, 1095 (2000) https://doi.org/10.1016/S0032-3861(00)00468-7 - T. D. Fornes and D. R. Paul, Polymer, 44, 4993 (2003) https://doi.org/10.1016/S0032-3861(03)00471-3
- N. Sheng, M. C. Boyce, D. M. Parks, G. C. Rutledge, J. I. Abes, and R. E. Cohen, Polymer, 45, 487 (2004) https://doi.org/10.1016/j.polymer.2003.10.100
- J. I. Weon, T. S. Creasy, A. J. Hsieh, and H. J. Sue, Polym. Eng. Sci., 45, 314 (2005) https://doi.org/10.1002/pen.20269
- T. S. Creasy and Y. S. Kang, J. Thermo. Comp. Mat., 17, 205 (2004) https://doi.org/10.1177/0892705704035403
- J. I. Weon, Z. Y. Xia, and H. J. Sue, J. Polym. Sci. Part B: Polym. Phys., 43, 3555 (2005) https://doi.org/10.1002/polb.20649
- T. D. Fornes, P. J. Yoon, H. Keskkula, and D. R. Paul, Polymer, 42, 9929 (2001) https://doi.org/10.1016/S0032-3861(01)00552-3
- J. D. Eshelby, Proc. R. Soc. A, 241, 376 (1957) https://doi.org/10.1098/rspa.1957.0133
- T. Mori and K. Tanaka, Acta. Metall. Mater., 21, 571 (1973) https://doi.org/10.1016/0001-6160(73)90064-3
- J. E. Ashton, J. C. Halpin, and P. H. Petit, Primer on Composite Materials: Analysis, Technomic, Westport, 1969
- J. C. Halpin, J. Compos. Mater., 3, 732 (1969)
- J. C. Halpin and J. L. Kardos, Polym. Eng. Sci., 16, 344 (1976) https://doi.org/10.1002/pen.760160512
- D. Adams and D. Doner, J. Compos. Mater., 1, 152 (1967) https://doi.org/10.1177/002199836700100205
- R. Hill, J. Mech. Phys. Solids, 13, 213 (1965) https://doi.org/10.1016/0022-5096(65)90010-4
- G. P. Tandon and G. J. Weng, Polym. Compos., 5, 327 (1984) https://doi.org/10.1002/pc.750050413
- R. Hill, Proc. Phys. Soc. A, 65, 349 (1952) https://doi.org/10.1088/0370-1298/65/5/307
- C. L. Tucker and E. Liang, Compos. Sci. Technol., 59, 655 (1999) https://doi.org/10.1016/S0266-3538(98)00120-1
- H. L. Cox, Br. J. Appl. Phys., 3, 72 (1952)
- M. van Es, F. Xiqiao, J. van Turnhout, and van der Giessen E, Specialty Polymer Additives: Principles and Applications, S. Al-Malaika and A. W. Golovoy, Eds., Blackwell Science, CA Malden, MA, 2001, chapter 21
- D. Hull and T. W. Clyne, An Introduction to Composite Materials, 2nd ed., Cambridge University Press, New York, 1996
- S. Xie, S. Zhang, F. Wang, H. Liu, and M. Yang, Polym. Eng. Sci., 45, 1247 (2005) https://doi.org/10.1002/pen.20359
- D. R. Paul and C. B. Bucknall, Polymer Blends, Wiley, New York, 2000
- T. J. Pinnavaia and G. W. Beall, Polymer-Clay Nanocomposites, Wiley, New York, 2000
- O. L. Manevitch and G. C. Rutledge, J. Phys. Chem. B, 108, 1428 (2003) https://doi.org/10.1021/jp0302818
- T. D. Fornes, Polyamide-layered Silicate Nanocomposites by Melt Processing, PhD Dissertation, University of Texas at Austin (2003)
- H. van Olphen, An Introduction to Clay Colloid Chemistry, for Clay Technologists, Geologists, and Soil Scientists, 2nd ed., Wiley, New York, 1977