References
- P. Pawlus, 1997, Change of cylinder surface topography in the initial stage of engine life, Wear, Vol. 209, pp. 69-83 https://doi.org/10.1016/S0043-1648(97)00007-0
- Z. Ye, C. Zhang, Y. Wang, H. S. Cheng, S. Tung, Q. J. Wang, X. He, 2004, An experimental investigation of piston skirt scuffing: a piston scuffing apparatus, experiments, and scuffing mechanism analyses, Wear, Vol. 257, pp. 8-31 https://doi.org/10.1016/S0043-1648(03)00538-6
- J. H. Jang, J. H. Kim, C. H. Kim, Y. H. Moon, 2008, Effect of Coating Layer Hardness on the Wear Characteristics of Diesel Engine Cylinder LinerPiston Ring, Trans. Mater. Process., Vol. 17, No. 5, pp. 343-349 https://doi.org/10.5228/KSPP.2008.17.5.343
- J. PRISO, M. Viljus, S. Letunovits, 2006, Friction and Dry Sliding Wear Behaviour of Cermets, Wear, Vol. 260, No. 7-8, pp. 815-824 https://doi.org/10.1016/j.wear.2005.04.006
- G. Bolelli, V. Cannillo, L. Lusvarghi, T. Manfredini, 2006, Wear Behaviour of Thermally Sprayed Ceramic Oxide Coatings, Wear, Vol. 261, No. 11-12, pp. 1298-1315 https://doi.org/10.1016/j.wear.2006.03.023
- L. Prchlik, S. Sampath, 2007, Effect of the microstructure of thermally sprayed coatings on friction and wear response under lubricated and dry sliding conditions, Wear, Vol. 262, pp. 11-23 https://doi.org/10.1016/j.wear.2006.03.042
- J. H. Horng, 1998, Studies of tribological behavior and separation between surfaces at initial boundary lubrication, Wear, Vol. 216, pp. 8-14 https://doi.org/10.1016/S0043-1648(97)00294-9
- S. S. Han, K. C. Park, 2008, Effect of surface roughness on frictional behavior of sheet steel for automotive, Trans. Mater. Process., Vol. 17, pp. 401-406 https://doi.org/10.5228/KSPP.2008.17.6.401
- W. Tang, X. Weng, L. Deng, K. Xu, J. Lu, 2007, Nano-scratch experiments of Au/NiCr multi-layered films for microwave integrated circuits, Sur. Coat. Technol., Vol. 201, pp. 5664-5666 https://doi.org/10.1016/j.surfcoat.2006.07.054
- M. Bezzazi, A. Khamlichi, A. Jabbouri, P. Reis, J.P. Davim, 2007, Experimental characterization of frictional behaviour of clutch facings using Pin-ondisk machine, Mater. Des., Vol. 29, pp. 2148-2153 https://doi.org/10.1016/j.matdes.2006.07.001
- B. H. Lee, Y. T. Keum, 2001, Friction model of sheet metal forming considering lubricant and surface roughness, Trans. Mater. Process., Vol. 10, pp. 543-550
- M. H. Song, J. G. Lee, Y. S. Kim, 2000, Friction and wear behavior of ultra-thin TiN film during sliding wear against alumina and hardened steel, Kor. J. Mater. Res., Vol. 10, pp. 62-68