DOI QR코드

DOI QR Code

Effect of Prior Microstructures on the Behavior of Cementite and Mechanical Properties in Low Carbon Steels

저탄소강의 초기 미세조직에 따른 기계적 성질과 시멘타이트거동

  • 이종철 (국민대학교 신소재공학부 대학원) ;
  • 강의구 (국민대학교 신소재공학부) ;
  • 이중원 (국민대학교 신소재공학부) ;
  • 오창석 (재료연구소 철강재료연구그룹) ;
  • 김성준 (재료연구소 철강재료연구그룹) ;
  • 남원종 (국민대학교 신소재공학부)
  • Published : 2009.10.01

Abstract

The effect of prior microstructures on mechanical properties in low carbon steels were examined by comparing the behavior of cementite and mechanical properties of cryo-rolled and subsequently annealed steels. Prior microstructures consisted of ferrite + pearlite, banite or martensite. Steels, consisting of bainitic microstructure, exhibited the better combination of strength - ductility than steels with other prior microstructures, such as ferrite + pearlite and martensite.

Keywords

References

  1. D. Wu, Z. Li, 2006, Effect of thermomechanical controlled processing on the microstructure and mechanical properties of Fe-C-Mn-Si multiphase steels, ISIJ Int., Vol. 46, pp. 1059-1066 https://doi.org/10.2355/isijinternational.46.1059
  2. J. D. Yoo, S. W. Hwang, K. T. Park, 2009, Factors influencing the tensile behavior of a Fe-28Mn-9Al-0.8C steel, Mater. Sci. Eng. A, Vol. 508, pp. 234-240 https://doi.org/10.1016/j.msea.2008.12.055
  3. D. H. Shin, K. T. Park, 2005, Ultrafine grained steels processed by equal channel angular pressing, Mater. Sci. Eng. A, Vol. 410-411, pp. 299-302 https://doi.org/10.1016/j.msea.2005.08.025
  4. Ji Tianfu, G. Yuwei, Q. Guiying, L. Qun, W. Tiansheng, W. Wei, X. Furen, C. Dayoung, S. Xinyu, Z. Xin, 2006, Nanocrystalline steel processed by severe rolling of lath martensite, Mater. Sci. Eng. A, VoI. 432, pp. 216-220 https://doi.org/10.1016/j.msea.2006.06.047
  5. R. Ueji, N. Tsuji, Y. Minimino, Y. Koizumi, 2002, Ultrafine refinement of plain low carbon steel by cold-rolling and annealing of martensite, Acta Mater., Vol. 50, pp. 4177-4189 https://doi.org/10.1016/S1359-6454(02)00260-4
  6. R. Ueji, N. Tsuji, Y. Minamino, Y. Koizumi, 2004, Effect of rolling reduction on ultrafine grained structure and meehanical properties of low-carbon steel thermomechanically processed from martensite starting structure, Sci. Technol. Adv. Mater., Vol. 5, pp. 153-162 https://doi.org/10.1016/j.stam.2003.10.017
  7. T. Shanmugasundaram, B. S. Murty, V. S. Sarma, 2006, Development of Ultrafine Grained High Strength AI-Cu Alloy by Cryomilling, Scr. Mater., Vol. 54, pp. 2013-2017 https://doi.org/10.1016/j.scriptamat.2006.03.012
  8. Y. B. Lee, D. H. Shin, K. T. Park, W. J. Nam, 2004, Effect of Annealing Temperature on Microstructures and Mechanical Properties of a 5083 Al Alloy Deformed at Cryogenic Temperature, Ser. Mater., Vol. 51, pp. 355- 359 https://doi.org/10.1016/j.scriptamat.2004.02.037