Ceramic 메탈 헬라이드 램프용 Dimming 전자식 안정기 개발

Design of Dimmable electric ballast for the Ceramic metal halide lamp

  • 발행 : 2009.10.01

초록

Metal halide (MH) lamps have been largely used due to high luminous efficiency, good color rendering, and long life. Since the metal halide lamps have problems of high ignition voltage and acoustic resonance. Thus, the design of ballast is very difficult for engineers. This paper proposes prototype of electric ballast in order to solve above two problems. The proposed electric ballast is consisted of EMI filter, full wave rectifier circuit, active PFC, DBI(Dual Buck Inverter), dimming circuit and ignitor circuit. The DBI supplies both rectangular voltage and current to the lamp. As the result of the experiment, the acoustic resonance was eliminated and the ignitor circuit was designed to generate high ignition voltage than 5kV. It makes the dimming circuit possible to control the lamp power in range between 230W and 350W.

키워드

참고문헌

  1. J.R.Coaton and A.M.Marsden, Lamps And Lighting, London U.K. : Arnold, pp.263-281, 1997
  2. W.M. Keeffe, 'Recent progress m metal halide discharge - lamp research', Proc. Industry electro eletronic. pt. A, vol. 127, No.3, pp. 181-189, April. 1980
  3. J. Garcia, J. Cardesin, J. Ribas. A. J. Calleja, E. L. Corominas, M. Rico -Secades and J.M. Alonso, 'Using high frequency current square waveforms to avoid acoustic resonances in low wattage metal halide lamps,' IEEE OESC'04, pp. 2799-2904, 2004
  4. J.M. Alonso, Javier Ribas, Manuel Rico-Secades, J.Garcia and J,Cardesin, 'Evaluation of high-frequency sinusoidal waveform superposed with 3rd harmonic for stable operation of metal halide lamps,' IEEE industry Applications Society, Conference, Vol. 2, pp. 1483-1488, 2002
  5. Jorge Garcia-Garcia, Jesus Cardesin, Javier Ribas, Antonio J,Calleja, Manuel Rico -Secades, Jose M.Alonso, 'Minimization of Acoustic Resonances in HID Lamps: Analysis and Comparison of Power Harmonics Content in High Frequency Non-Resonant Inverters', IEEE Transaction on Power electronics. Vol. 20, No. 6, pp. 1467-1479, November 2005 https://doi.org/10.1109/TPEL.2005.857563
  6. M.A.Ponce, A.Lopez, J,Correa, J,Arau, and, J,M.Alonso, 'Electronic ballast for HID lamps: Topology, analysis, design and experimental results,' in Proc. IEEE Applied Power Electronics Conf., vol.2, 2001, pp.658-663
  7. Jun Liu, Yangguang Yan, 'A novel hysteresis current controlled dual buck half bridge inverter', Power Electronics Specialist Conference, PESC '03, vol.4, pp. 1615-1620, June 2003 https://doi.org/10.1109/PESC.2003.1217699
  8. Liu. K.-H., Lee. F.C.Y., 'Zero-voltage switching technique in DC/DC converters' , Power Electronics, IEEE Transactions on Volume 5, Issue 3, pp. 293-304, July 1990 https://doi.org/10.1109/63.56520
  9. 박종연, 신동석, 임기승, 최현희, 'ZVS을 이용한 DB하프브리지 인버터 구현 방법', 대한전기학회지, Vol. 58, No.4, pp.756-762, April 2009
  10. Muhammad H. Rashid, Power Electronics Handbook, ACADEMIC PRESS, pp.245-260, 207
  11. Tang, W., Lee, F.C., Ridley, R.B., Cohen, I., 'Charge control: modeling, analysis, and design', Power Electronics, IEEE Transactions on Vol. 8, pp. 396-403, Oct 1993 https://doi.org/10.1109/63.261009
  12. Walt Jung, Op Amp Application Handbook, Analog device, pp.23-89, 2005