Abstract
The "Jeongjagak(丁字閣, T shaped building)" was important building from Goryeo Dynasty to Joseon Dynasty. For long period, the scale and form of the building had been changing bit by bit. The change of building results from the function. As the Jeongjagak accepted the functions of the Yeongakjeon(靈幄殿), there appeared changes of plane. The main function of Yeongakjeon was suppling space for the dead king's coffin. The Yeongakjeon was not built in the first year of King Sukjong(1674). At that time, the Jeongjagak was responsible for the function of the Yeongakjeon as an alternative. Starting from this, the Jeongjagak was used as space for the dead king's coffin. Because the coffin should place on from south to north, it demanded long inner space in south-north direction. Therefore the effort to make enough length in south-north direction was begun from the first year of King Sukjong(1674). In order to solve the problem, the Toigu(退構) was made from the reign of King Sukjong to the 28th year King Youngjo(1852). The Toigu was temporary inner space which was made in one compartment at the Baewichung(拜位廳, the part of the Jeongjagak). But the length of the Jeongjagak's south-north direction was reduced to 61.8m(20尺6寸) at the 33th year of King Youngjo(1857) when the "Gukjosangryebopyon(國朝喪禮補編)" was completed. Also it extended to 84m(28尺) during the reign of King Jeongjo(1774~1800). Following these process of extension and reduction, the length was standardized as 72m(24尺) at the reign of King Sunjo(1800~1834). These facts explains that the main cause of plane change at the Jeongjagak was acceptance of functions that was used as space for the dead king's coffin. Also, the important points of change at the Jeongjagak were the first year of King Sukjong, the 33th year of King Youngjo and the first year of King Sunjo. When it was the first year of King Sukjong and the 33th year of King Youngjo, there were two national funerals. Because of concern about the increasing labor and tax of the nation, the scale of the Jeongjagak was changed to decreasing size. Due to the improvement of drawings and annotation on a Eugwe(儀軌) at the first year of King Sunjo, the size of Jeongjagak was standardized.