References
- Yu, Z. Y., Masuzawa, T. and Fujino, M., "Micro-EDM for Three-Dimensional Cavities - Development of Uniform Wear Method- ," Annals of the CIRP, Vol. 47, No. 1, pp. 169-172, 1997 https://doi.org/10.1016/S0007-8506(07)62810-8
- Chung, D. K., Kim, B. H. and Chu, C. N., "Micro Electrical Discharge Milling Using Deionized Water as a Dielectric Fluid," Journal of Micromechanics and Microengineering, Vol. 17, No. 5, pp. 867-874, 2007 https://doi.org/10.1088/0960-1317/17/5/004
- Tonshoff, H. K., Alvensleben, F., Ostendprf, A., Kamlage, G. and Nolte, S., "Micromachining of Metals Using Ultrashort Laser Pulses," International Journal of Electrical Machining, No. 4, pp. 1-6, 1999
- Meijer, J., Du, K., Gilner, A., Hoffmann, D., Kovalenko, V. S., Masuzawa, T., Ostendon, A., Poprawe, R. and Schulz, W., "Laser Machining by Short and Ultrashort Pulses, State of the Art and New Opportunities in the Age of the Photons," Annals of the CIRP, Vol. 51, No. 2, pp. 531-550, 2002 https://doi.org/10.1016/S0007-8506(07)61699-0
- Allen, D. M. and Huang, S. X., "The Reduction of Tool Wear and Machining Time for the Micro-Electro Discharge Machining of Micro-holes by Using Copper Vapour Laser Machining as a Roughing Process," International Journal of Electrical Machining, No. 2, pp. 9-11, 1997
- Li, L., Diver, C., Atkinson, J., Giedl-Wagner, R. and Helml, H. J., "Sequential Laser and EDM Microdrilling for Next Generation Fuel Injection Nozzle Manufacture," Annals of the CIRP, Vol. 55, No. 1, pp. 179-182, 2006 https://doi.org/10.1016/S0007-8506(07)60393-X
- Masuzawa, T., Fujimoto, M. and Kobayashi, K., "Wire Electro-Discharge Grinding for Micro machining," Annals of the CIRP, Vol. 34, No. 1, pp. 431-434, 1985 https://doi.org/10.1016/S0007-8506(07)61805-8
- Lee, B. U., Yi, S. M., Kim, B. H. and Chu, C. N., "Fabrication of 3D Micro structure Using Micro Electrical Discharge Milling," Journal of the KSPE, Vol. 21, No. 9, pp. 41-47, 2004
- Tsai, Y. Y., Masuzawa, T. and Fujino, M., "Investigations on Electrode Wear in Micro-EDM," Proceedings of the International Symposium on Electromachining(ISEM XIII), pp. 719-726, 2001