Productivity and Economic Analysis of Sandwich Panel Construction Work by Shop Fabrication

공장가공에 따른 샌드위치 패널공사의 생산성 및 경제성 분석

  • 조동열 (홍익대학교 건축공학과) ;
  • 손재호 (홍익대학교 건축공학과) ;
  • 이승현 (홍익대학교 건축공학과)
  • Published : 2009.09.30

Abstract

The domestic construction market started to expand steadily since 1970s. The building market which utilizes a sandwich panel with advantages of economical construction expenses and convenient construction has grown rapidly in recent years. However, the companies which specialize in constructing sandwich panels are relatively small or medium size, compared with other construction companies. As a result, studies on the improvement of productivity have not been conducted sufficiently. In this study, the construction sites of sandwich panel are investigated, and the work processes by each team are analyzed. Additionally, the productivity and the construction cost of each work group are analyzed by constructing a model using the Web-Cyclone. It analyzed sensitivities about change of productivity and work costs following in processing place of the panel which is one of the productivity effect factors, so it assayed the optimized productivity by each work group and work costs. Analysis showed that 30% of productivity has improved compared with the factory processing work group, and analysis of work costs showed that about 15% of work costs was increased. Also sensitivity analysis of opening ratio showed that the work costs optimization will be accomplished when about 20% of opening was processed from the factory.

1970년대부터 고도의 산업발전을 이루기 시작한 국내 건설현장에서 저렴한 공사비용 및 간편한 시공성 등을 장점으로 샌드위치패널을 활용한 건축물이 급격하게 증가하는 실정이다. 하지만 샌드위치 패널의 시공을 담당하는 기업들은 대형 건설업체보다 중소건설업체인 관계로 생산성 향상을 위한 연구가 부족한 상황이다. 본 연구는 샌드위치패널공사 현장조사를 하여 작업조별 작업싸이클을 분석하고 Webcyclone을 이용한 모델링을 하였으며, 각 작업조별 생산성 및 공사금액을 분석하였다. 또한 생산성 영향요인중 하나인 패널의 가공장소에 따른 생산성 및 공사금액의 변동을 민감도 분석하여 각 작업조별 최적화된 생산성 및 공사금액을 분석하였다. 분석결과 공장가공 작업조가 현장가공 작업조에 비하여 약 30% 정도의 생산성이 향상됨으로 조사되었고, 공사비용 분석 결과 약 15% 정도의 공사비용이 증가됨으로 조사되었다. 또한 개구부 요율에 따른 민감도 분석에 의하여 약 20% 정도의 개구부를 공장에서 가공을 하였을 때 공사금액 최적화가 이루어짐을 보여준다.

Keywords

References

  1. 강내민, "샌드위치 패널심재로 활용한 St/BA개빌 다공성 경량 콘크리트의 특성", 한국건축시공학회 학술,기술논문발표회논문집, 제3권 제1호, 2003, pp.31-34
  2. 김선우외 2인. "경량벽체의 차음특성에 관한 실험적 연구", 제14권 제12호, 1998, pp.259-268
  3. 김영찬외 2인, "거푸집용 Sandwich패널의 개발에 관한 기초연구", 대한건축학회논문집, 제12권 제12호, 1996, pp.243-249
  4. 김윤재외 2인, "경량칸막이 벽체의 구성재료 및 시공방법에 따른 차음성능 향상에 관한 연구", 대한건축학회 추계학술발표대회논문집, 2003, pp.925-928
  5. 손정욱외 2인, "건설공사 생산성 측정방법에 관한 연구 ; 작업수행방법 개선사례를 중심으로", 대한건설학회논문집 제19권 제10호, 2003, pp.101-108
  6. 손철수, "여름철 엠보싱 샌드위치 패널의 열적 성능에 관한 연구 : 평판 샌드위치 패널과 비교를 중심으로", 설비공학회논문집, 제12권 제10호, 2000, pp.917-924
  7. 석현수, "철골 및 PC구조의 생산성 및 경제성 분석에 관한 연구", 홍익대학교 석사학위논문, 2008
  8. 이병권, "차음성능이 향상된 경량벽체 개발 및 성능평가 연구", 한국소음진동학회 춘계학술대회 논문집, 2004, pp.699-704
  9. 이시욱, "카리프트의 성능 변화에 따른 터널공사 버력처리 공정 생산성 분석 연구", 한국건설관리학회 학술발표대회 논문집, 2006, PP.593-596
  10. 이소미, "샌드위치패널을 이용한 지붕일체형 태양전지 모듈의 개발", 한국태양에너지학회 추계학술발표대회 논문집, 2006, pp.69-74
  11. 임홍순, "샌드위치패널 화재시험방법의 국제적 동향", 방재기술 제 33호, 2002
  12. 이세현외 3인, 건축물 내화설계기술개발(II)-샌드위치패널 등 복합자재의 공장건축물 내부마감재료 기준에 관한 연구보고서, 한국건설기술연구원, 2003,2
  13. 장완복 외1, "작업 사이클 분석을 통한 오피스 건축공사 생산성분석 방법론에 관한 연구", 대한건축학회 추계학술발표대회 논문집(구조계), 제23권 제2호, 2003
  14. 정정호, "무기질 단열재를 사용한 샌드위치패널의 단열 및 차음성능", 한국생활환경학회지, 제13권 제4호, 2006, pp.320-326
  15. 정희경외 2인, "작업측정기법을 이용한 거푸집 공사의 생산성에 관한 연구", 한국건축시공학회 논문집, 제5권 제4호, 2005, pp.131-137 https://doi.org/10.5345/JKIC.2005.5.4.131
  16. Halpin, D.W., "Construction project simulation using CYCLONE", Canadian journal of civil engineering, 1998 https://doi.org/10.1139/cjce-25-1-16
  17. Seung-Woo Han 외 3인, "Simulation analysis of productivity variation by global positioning system(GPS) implementation in earthmoving operation", Canadian journal of civil engineering, 2006 https://doi.org/10.1139/L05-124
  18. Sangyoub Lee외 2인, "Quantified implementing enterprise resource planning though process simulation", Canadian journal of civil engineering, 2004 https://doi.org/10.1139/l03-100
  19. http://cyclone.ecn.purdue.edu:8080/WebCYCLONE/Cyclone.jsp