심부 원형터널에 시공된 콘크리트 라이닝의 새로운 탄소성해석법

A New Method for Elasto-Plastic Analysis of Concrete Lining Installed in a Deep Circular Tunnel

  • 이연규 (군산대학교 해양건설공학과) ;
  • 박경순 (군산대학교 대학원 해양산업공학과) ;
  • 송원경 (한국지질자원연구원 지구환경연구본부) ;
  • 박철환 (한국지질자원연구원 지구환경연구본부) ;
  • 최병희 (한국지질자원연구원 지구환경연구본부)
  • 발행 : 2009.08.31

초록

정수압 지압조건의 심부 암반에 굴착되는 원형터널의 지보재로 설치되는 콘크리트 라이닝의 유한차분 탄소성해석법을 제안하였다. 암반과 라이닝의 항복은 Mohr-Coulomb 조건식을 따르는 것으로 가정하였다. 일반적으로 콘크리트 라이닝의 설치 전 선행내공변위가 발생된다는 점을 고려하기 위하여 라이닝 바깥 경계면에 작용하는 지압의 크기를 계산하는 과정에서 굴착 후 라이닝 설치지연 효과를 반영시킬 수 있도록 하였다. 암반과 라이닝의 소성영역에서 발생하는 응력 및 변위분포 계산을 위해 Lee & Pietruszczak(2008)의 해석법을 적용하였다. 제안된 방법의 활용성을 보여주기 위해 가상의 압축공기 저장용 터널에 시공된 콘크리트 라이닝에 대해 탄소성해석을 실시하였다. 해석결과 라이닝의 안쪽 및 바깥쪽 경계부에 작용하는 압력의 크기를 정확하게 산정하는 것이 라이닝의 안정성 해석에서 매우 중요함을 알 수 있었다.

This paper proposes an elasto-plastic finite difference method which is useful for the stability evaluation of concrete lining installed in a deep circular tunnel. Mohr-Coulomb criterion is assumed for the condition of yielding in both the rock mass and concrete lining. In order to take into account the installation delay of lining after the excavation, the outer boundary pressure acting on the lining was calculated with the consideration of the convergence occurred before the lining installation. The distributions of stress and displacement in the rock mass and lining were calculated based on the method proposed Lee & Pietruszczak (2008). The applicability of the proposed method was demonstrated by conducting the elasto-plastic analysis of concrete lining supporting an imaginary compressed air storage tunnel. The analysis result revealed that the exact determination of the boundary pressures acting on the concrete lining is of importance in the stability analysis of concrete lining.

키워드

참고문헌

  1. 김형목, 류동우, 정소걸, 송원경, 2009, 복공식 압축공기지하저장을 위한 가변성 분할 라이닝 터널기술, 터널과 지하공간 (한국암반공학회지), 19.2, 77-85
  2. 마상준, 장필성, 2006, 국내 터널에서의 현장타설 콘크리트 라이닝 시공실태 파악, 대한토목학회지, 54.12, 68-79
  3. 이연규, 2008, Mohr-Coulomb 암반에 굴착된 원형터널의 보강효과 해석을 위한 간편 수치해석법, 터널과 지하공간 (한국암반공학회지), 18.2, 98-106
  4. 임종진, 신휴성, 이성원, 2006, 일체형 터널 라이닝 지보성능에 대한 수치해석적 연구, 한국암반공학회 춘계학술발표회논문집, 305-310
  5. Brown, E.T and J.W. Bray, 1982, Rock-support interaction calculations for pressure shafts and tunnels, In Rock Mechanics: Caverns and Pressure Shafts, ISRM Symp., Aachen, 555-565
  6. Carter, J.P., J.R. Booker and S.K. Yeung, 1986, Cavity expansion in cohesive frictional soils, Geotechnique, 36, 349-358 https://doi.org/10.1680/geot.1986.36.3.349
  7. Kim, H.J. and Z. Eisenstein, 2006, Prediction of tunnel lining load using correction factors, Engineering Geology, 85, 302-312 https://doi.org/10.1016/j.enggeo.2006.03.001
  8. Lee, Y.K. and S. Pietruszczak, 2008, A new numerical procedure for elastic-plastic analysis of a circular opening excavated in a strain-softening rock mass, Tunnel. Underg. Space Technol., 23.5, 588-599 https://doi.org/10.1016/j.tust.2007.11.002
  9. Sinha, R.S., 1989, Underground structures, Design and Instrumentation, Elsevier
  10. Sulem, J., M. Panet and A. Guenot, 1987, An analytical solution for time-dependent displacement in a circular tunnel, Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., 24.3, 155-164 https://doi.org/10.1016/0148-9062(87)90523-7
  11. Timoshenko, S.P. and J.N. Goodier, 1982, Theory of elasticity (3rd Ed.), McGraw-Hill
  12. Yu, H.S., 1992, Expansion of a thick cylinder of soils, Computers and Geotechnics, 14, 21-41 https://doi.org/10.1016/0266-352X(92)90022-L