References
- 김정태(1999) 소수의 고유진동수를 사용하는 비파괴 균열발견모델의 유도 및 검증, 한국전산구조공학회논문집, 한국전산구조공학회, 제12권, 제2호, pp. 140-159.
- 김정태, 류연선, 조현만(2002) 고유진동수 이용 손상추정법과 모드형상 이용 손상추정법에 의한 PSC 보의 비파괴 손상검색, 한국전산구조공학회논문집, 한국전산구조공학회, 제15권, 제1호, pp. 43-58.
- 김정태, 박재형, 홍동수, 나원배(2008) 가속도 및 임피던스 신호를 이용한 PSC 거더교의 하이브리드 손상 모니터링 체계, 대한토목학회논문집, 대한토목학회, 제28권, 제1A호, pp. 135-146.
- 이진학, 윤정방(2003) 구조물의 응답자료만을 이용한 모드계수 추정법에 관한 비교연구, 대한토목학회논문집, 대한토목학회, 제23권, 제2A호, pp. 187-201.
- 이종재, 이종원, 윤정방(2005) 상시진동 데이터를 이용한 교량의 손상추정기법, 대한토목학회논문집, 대한토목학회, 제25권, 제2A호, pp. 375-385.
- 윤정방, 이종재, 구기영(2003) 교량 건전성 모니터링 및 손상추정기술, 한국전산구조공학회논문집, 한국전산구조공학회, 제16권, 제1호, pp. 7-14
- 윤정방, 이형진(1997) System Identification 기법을 이용한 교량의 안전진단방법, 대한토목학회논문집, 대한토목학회, 제45권, 제2호, pp. 74-82.
- 최은수, 김현민, 오지택, 김성일(2005) 철도교용 고무패드 설치에 따른 판형교의 동적 거동 분석, 한국강구조학회논문집, 한국강구조학회, 제17권, 제3호, pp. 295-306.
- Adams, R.D., Cawley, P., Stone, C.J., and Stone, B.J. (1978) A vibration technique for non-destructively assessing the integrity of structures. Journal of Mechanical Engineering Science, Vol. 20, pp. 93-100. https://doi.org/10.1243/JMES_JOUR_1978_020_016_02
- Bhalla, S. and Soh, C.K. (2003) Structural impedance based damage diagnosis by piezo-transducers, Earthquake Engng Struct. Dyn. Vol. 32, No. 12, pp. 1897-1916. https://doi.org/10.1002/eqe.307
- Brinker, R., Zhang, L., and Andersen, P. (2001) Modal identification of output-only systems using frequency domain decomposition, Smart Materials and Structures, Vol. 10, pp. 441-445. https://doi.org/10.1088/0964-1726/10/3/303
- Giurgiutiu, V., Redmond, J., Roach, D., and Rackow K. (2000) Active sensors for health monitoring of aging aerospace structures. SPIE's 7th Annual International Symposium on Smart Stuctures and Materials, 5-9 March 2000, Newport Beach, CA, Vol. 3985, pp. 294-305.
- Kim, J.T., Park, J.H., and Lee, B.J. (2007) Vibration-based damage monitoring in model plate-girder bridges under uncertain temperature conditions. Engineering Structures, Vol. 29, No. 7, pp. 1354-1365. https://doi.org/10.1016/j.engstruct.2006.07.024
- Kim, J.T., Ryu, Y.S., Cho, H.M., and Stubbs, N. (2003) Damage identification in beam-type structures: frequency-based method vs mode-shape-based method, Engineering Structures, Vol. 25, No. 1, pp. 57-67. https://doi.org/10.1016/S0141-0296(02)00118-9
- Liang, C., Sun, F.P., and Rogers C.A. (1994) Coupled electromechanical analysis of adaptive material systems-determination of the actuator power consumption and system energy transfer, Journal of Intelligent Material Systems and Structures, Vol. 5, No. 1, pp. 12-20. https://doi.org/10.1177/1045389X9400500102
- Park, G., Kabeya, K., Cudney, H.H., and Inman, D.J. (1999) Impedance-based structural health monitoring for temperature varying applications. JSME International Journal, Vol. 42, No. 2, pp. 249-258.
- Park, G., Farrar, C.R., Rutterford, A.C., and Robertson. A.N. (2006) Piezoelectric active sensor self-diagnostics using electrical admittance measurements, Journal of Vibration and Acoustics, Vol. 128, No. 4, pp. 469-476. https://doi.org/10.1115/1.2202157
- Rytter, A. (1993) Vibration based inspection of civil engineering, Ph.D. Dissertation, University of Alborg, Denmark.
- Sohn, H., Farrar, C.R., Hemez, F.M., Shucnk, D.D., Strnemates, D.W., and Nadler, B.R. (2003) A review of structural health monitoring literature 1996-2001, LA-13976-MS, Los Alamos National Laboratory, Los Alamos.
- Sundermeyer, J.N. and Weaver, R.L. (1993) On crack identification and characterization in beam by nonlinear vibration analysis. TAM Report No. 74, UILU-ENG-93-604, Univ. of Illinois.
- Sun. F.P., Chaudhry, Z., Laing, C., and Rogers, C.A. (1995) Truss structure integrity identification using PZT sensor-actuator, Journal of Intelligent Material Systems and Structures, Vol. 6, pp. 134-139. https://doi.org/10.1177/1045389X9500600117
- Zhou, S.W. and Rogers C.A. (1995) Heat generation, temperature, and thermal stress of structurally integrated piezo-actuators, Journal of Intelligent Material Systems and Structures, Vol. 6, No. 3, pp. 372-379. https://doi.org/10.1177/1045389X9500600308