DOI QR코드

DOI QR Code

보강형의 시공방법을 고려한 타정식 현수교의 초기형상해석 모델

A Structural Analysis Model for the Initial Configuration of a Suspension Bridge Considering the Erection Method of Stiffening Girders

  • 고성석 (동신대학교 토목공학과) ;
  • 강성후 (동신대학교 토목공학과) ;
  • 박선준 (동신대학교 토목공학과) ;
  • 정재호 (대림산업(주) 기술연구소 특수교량팀)
  • 투고 : 2009.04.14
  • 심사 : 2009.06.01
  • 발행 : 2009.07.31

초록

타정식 현수교의 보강형 가설중의 경계조건과 하중조건의 변화를 고려하여 초기형상을 결정하기 위한 구조해석 모델링 방법 및 해석 알고리즘을 제안하였다. 타정식 현수교의 가설단계를 보강형의 가설시점을 기준으로 보강형 가설단계인 1단계와 완공단계의 2단계로 구분하였으며 이러한 가설단계를 고려하여 초기형상해석 단계를 1차 형상해석과 2차 형상보정해석의 2단계로 구분하였다. 각 해석단계에 대한 보강형의 경계조건과 작용하중의 모델링 방법 및 반복해석 알고리즘을 제안하였으며 실 교량에 대해 수치해석을 수행하여 기존 해석방법에 의한 초기형상해석결과와 비교, 분석하였다. 실 교량에 대한 수치해석 결과 기존 초기형상해석방법의 문제점을 파악할 수 있었으며 본 연구에서 제안된 방법을 적용할 경우 기존 방법의 문제점을 해결할 수 있음을 확인하였다.

To determine the initial configuration of the suspension bridge appropriate idealization model and analysis procedure are proposed as considering the boundary and loading conditions of stiffening girder during the erection. The construction stages of a suspension bridge are divided into two steps which are the first stage of the erection and the second stage of the completion in terms of the erection time of stiffening girders, and depending upon such an erection step the initial configuration analysis is classified the first configuration analysis and the revision analysis of the second configuration. The boundary and loading conditions and the analysis procedures for each stage are suggested and the results are verified by comparing with existing data. The results show that the proposed method provides better solution compared to the results using existing method.

키워드

참고문헌

  1. 김문영, 경용수, 이준석(2003) 현수교의 개선된 초기형상 해석법, 한국강구조학회 논문집, 한국강구조학회, 제15권, 제2호, pp. 219-229.
  2. 대림산업(주), (주)유신코퍼레이션(2003) 현수교 기술과 변천, 도서출판 과학기술.
  3. 문종훈, 장승필(2008) 현수교 케이블의 형상조정, 한국강구조학회지, 한국강구조학회, 제20권, 제2호, pp. 47-53.
  4. 문종훈(2008) 지구곡률을 고려한 현수교케이블의 해석 및 형상관리 기법, 박사학위논문, 서울대학교.
  5. 이명재, 김재홍, 백종균, 권호철(2004) 묘도-광양간 초장대 현수교의 실현을 위한 교량 구조시스템의 혁신, 한국강구조학회지, 한국강구조학회, 제19권, 제3호, pp. 9-19.
  6. 이승우(2001) 현수교의 계획과 해석, 도서출판 한기술.
  7. 정운용(1999) 현수교 설계를 위한 선형해석 방법, 대한토목학회논문집, 대한토목학회, 제19권, 제I-5호, pp. 725-732.
  8. 조경식, 김종화, 안남규(2006) TCUD법을 이용한 현수교 해석 프로그램의 개발, 2006년도 학술발표회 논문집, 한국강구조학회, pp. 268-273.
  9. 조충영, 김재홍, 박수영, 신상훈(2004) 적금-영남 연륙교 가설공법, 대한토목학회 구조위원회 2004년도 학술발표회 논문집, 대한토목학회, pp. 219-229.
  10. 최인호, 이승우(2001) 변위법에 의한 현수교의 구조해석법, 대한토목학회지, 대한토목학회, 제49권, 제7호, pp. 18-25.
  11. 한국도로공사(2008) 건설기술혁신사업 초장대교량사업단 상세기획보고서.
  12. Gimsing, N.J. (1998) East Bridge, A/S Storebaeltsforbindelsen.
  13. Janjic, D. and Bokan, H. (2006) Erection Control, TDV's Unique Tool Solution for Bridge Design and Construction, IABSE Symposium on Responding to Tomorrow's Challenges in Structural Engineering, International Association for Bridge and Structural Engineering, Budapest, IABSE.
  14. TDV GmbH (2007) RM2006 User Guide, Graz, Austria.