References
- Choi, S.U., 1995, Enhancing Thermal Conductivity of Fluids with Nanoparticles, in : Siginer, D.A., Wnag, H.P., (Eds), Developments and Applications of Non Newtonian Glows, FED-Vol. 231/MD-Vol. 66, ASME,New York, pp. 99-105
- Roy Chowdhury, S.K. and Winterton, R.H.S., 1985, Surface Effects in Pool Boiling, International Journal of Heat and Mass Transfer, Vol. 28, Issue 10, pp. 1881-1889 https://doi.org/10.1016/0017-9310(85)90210-8
- Ramilison, J.M., Sadasivan, P. and Lienhard, J.H., 1992, Surface Factors Influencing Burnout on Flat Heaters, ASME Journal of Heat Transfer, Vol. 114, pp. 287-290 https://doi.org/10.1115/1.2911261
- Kim, S. J., Bang, I. C., Buongiorno, J. and Hu, L.W., 2007, Surface Wettability Change During Pool Boiling of Nanofluids and Its Effect on Critical Heat Flux. Int. J. Heat Mass Transfer 50(19-20), pp. 4105-4116 https://doi.org/10.1016/j.ijheatmasstransfer.2007.02.002
-
Bang, I. C. and Chang, S. H., 2005, Boiling Heat Transfer Performance and Phenomena of
$AI_2$ $O_3$ -Water Nano-Fluids from a Plain Surface in a Pool. Int. J. Heat Mass Transfer 48(12), pp. 2407-2419 https://doi.org/10.1016/j.ijheatmasstransfer.2004.12.047 - Kim, H., Kim, J. and Kim, M.H., 2006b, Effect of Nanoparticles on CHF Enhancement in Pool Boiling of Nano-Fluids. Int. J. Heat Mass Transfer 42(25-26), pp. 2003-2013 https://doi.org/10.1016/j.ijheatmasstransfer.2006.07.019
- Coursey, J. S. and Kim, J., 2008, Nanofluid Boiling: The Effect of Surface Wettability. Int. J. Heat Fluid Flow 29(6), pp. 1577-1585 https://doi.org/10.1016/j.ijheatfluidflow.2008.07.004
- Kim, H., 2007. Experimental Investigations of Pool Boiling CHF Enhancement in Nanofluids. Ph.D. Thesis, Pohang University of Science and Technology, Pohang, South Korea
- Hyung Dae Kim and Moo Hwan Kim, 2007, “Experimental Investigations on Pool Boiling CHF of Nano-Fluids,” Trans. of the KSME B, Vol. 31, pp. 949-956 https://doi.org/10.3795/KSME-B.2007.31.11.949
-
Santillan, M.J., Membrives, Quaranta, F., N. and Boccaccini, A. R., 2008, Characterization of
$TiO_2$ Nanoparticle Suspensions for Electophoretic Deposition. J. Nanopart. Res. 10, pp. 787-793 https://doi.org/10.1007/s11051-007-9313-8 - Kandlikar, S.G., 2001, A Theoretical Model to Predict Pool Boiling CHF Incorporating Effects of Contact Angle and Orientation, ASME Journal of Heat Transfer, Vol. 123, pp. 1071-1079 https://doi.org/10.1115/1.1409265
- Coleman, H.W. and Steele, W.G., 1999, Experimentation and Uncertatinty Analysis for Engineers 2nd Edition, John Wiley & Sons, Inc
- Rohsenow, W. M. and Griffith, P., 1956, Correlation of Maximum Heat Transfer Data for Boiling of Saturated Liquids. Chem. Eng. Prog. Symp. Series 52(18), 47
- Zuber, N., 1959, Hydrodynamic Aspects of Boiling Heat Transfer. Ph.D. Thesis, University of California, Los Angeles, USA
- Hamamura, Y. and Katto, Y., 1983, A New Hydrodynamic Model of Critical Heat flux, Applicable Widely to Both Pool and Forced Convection Boiling on Submerged Bodies in Saturated Liquids. Int. J. Heat Mass Transfer 26(3), pp. 389-399 https://doi.org/10.1016/0017-9310(83)90043-1
- You, S. M., Kim, J. H. and Kim, K. H., 2003, Effect of Nanoparticles on Critical Heat Flux of Water in Pool Boiling Heat Transfer. Appl. Phy. Lett. 83(16), pp. 3374-3376 https://doi.org/10.1063/1.1619206
- Colubovic, M., Hettiarachchi, M. H. D., Worek, W. M., 2008, Nano Fluids and Critical Heat Flux. Paper No. MNHT2008-52204, Proc. 1st ASME Micro/Nanoscale Heat Transfer International Conference, Tainan, Tanwan
- Milanova, D. and Kumar, R., 2005, Role of Ions in Pool Boiling Heat Transfer of Pure and Silica Nanofluids. Appl. Phys. Lett. 87, 233107 https://doi.org/10.1063/1.2138805
- Kim, H.D. and Kim, M.H., 2007, Effect of Nanoparticle Deposition on Capillary Wicking that Influences the Critical Heat Flux in Nanofluids. Appl. Phy. Lett. 91(1), 014104 https://doi.org/10.1063/1.2754644
- Liter, S.G.. and Kaviany, M., 2001, Pool-Boiling CHF Enhancement by Modulated Porous-Layer Coating: Theory and Experiment, International Journal of Heat and Mass Transfer, Vol.44, pp. 4287-4311 https://doi.org/10.1016/S0017-9310(01)00084-9
- Cieslinski, J. T., 2002, Nucleate Pool Boiling on Porous Metallic Coatings. Exp. Therm. Fluid Sci. 25, pp. 557-564 https://doi.org/10.1016/S0894-1777(01)00105-4
- Kim, H., DeWitt, G., McKrell, T., Buongiorno, J. and Hu, L. W., 2009, On the Quenching of Steel and Zircaloy Spheres in Water-Based Nanofluids with Alumina, Silica and Diamond Nanoparticles, Int. J. Multiphase Flow (In press) https://doi.org/10.1016/j.ijmultiphaseflow.2009.02.004
- Chen, R., Lu, M.C., Srinivasan, V., Wang, Z., Cho, H. H. and Majumda, A., 2009, Nanowires for Enhanced Boiling Heat Transfer. Nano Lett. 9(2), pp. 548-553 https://doi.org/10.1021/nl8026857
- Arik, M. and Bar, A.C., 2003, Effusivity-Based Correlation of Surface Property Effects in Pool Boiling CHF of Dielectric Liquids, International Journal of Heat and Mass Transfer, Volume 46, Issue 20, pp. 3755-3764 https://doi.org/10.1016/S0017-9310(03)00215-1
- Hahne, E. and Grigull, U., 1977, Heat Transfer in Boiling, Hemisphere, New York
- Tong, L.S., 1968, Boiling Heat Transfer and Two- Phase Flow, Wiley, New York
- Liaw, S.P. and Dhir, V.K., 1986, Effect of Surface Wettability on Transition Boiling Heat Transfer from a Vertical Surface, Proceeding of 8th International Heat Trasnfer Conference, Vol. 4, pp. 20331-2036
- Golobic, I. and Ferjancic, K., 2000, The role of enhanced Coated Surface in Pool Boiling CHF in FC- 72, Heat and Mass Transfer, Vol. 36, pp. 525-531 https://doi.org/10.1007/s002310000118
- Takata, T., Hidaka, S., Masuda, M. and Ito, T., 2003, Pool Boiling on a Superhydrophilic Surface, International Journal of Energy Research, Vol. 27, pp. 111-119 https://doi.org/10.1002/er.861