한국세라믹학회지 (Journal of the Korean Ceramic Society)

  • 제46권5호
  • /
  • Pages.478-483
  • /
  • 2009
  • /
  • 1229-7801(pISSN)
  • /
  • 2234-0491(eISSN)
한국세라믹학회 (The Korean Ceramic Society)
권호 표지
DOI QR코드

DOI QR Code

질화상압(NPS)법으로 제조한 질화규소의 열충격 저항성 및 내부식성 특성평가

Thermal Shock and Hot Corrosion Resistance of Si3N4 Fabricated by Nitrided Pressureless Sintering

  • 곽길호 (국민대학교 기계자동차공학부) ;
  • 김철 (국민대학교 기계자동차공학부) ;
  • 한인섭 (한국에너지기술연구원 융복합재료연구센터) ;
  • 이기성 (국민대학교 기계자동차공학부)
  • Kwak, Kil-Ho (School of Mechanical and Automotive Engineering, Kookmin University) ;
  • Kim, Chul (School of Mechanical and Automotive Engineering, Kookmin University) ;
  • Han, In-Sub (Convergence Materials Research Center, Korea Institute of Energy Research) ;
  • Lee, Kee-Sung (School of Mechanical and Automotive Engineering, Kookmin University)
  • 발행 : 2009.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Thermal shock and hot corrosion resistance of silicon nitride ceramics are investigated in this study. Silicon nitrides are fabricated by nitride pressureless sintering (NPS) process, which process is the continuous process of nitridation reaction of Si metal combined with subsequent pressureless sintering. The results of thermal shock test show it sustains 400MPa of initial strength during test in the designated condition of ${\Delta}T=700{\sim}25^{\circ}C$ up to maximum 4,800 cycles. Hot corrosion tests also reveal that the strength degradation of NPS silicon nitride did not occur at $700^{\circ}C$ with an exposure in Ar, $H_2$, Na and K for 1,275 h.

키워드

참고문헌

  1. F. F. Lange, “Fracture Toughness of $Si_3N_4$ as a Function of the Initial a-Phase Content,” J. Am. Ceram. Soc., 62 [7-8] 428-30 (1979) https://doi.org/10.1111/j.1151-2916.1979.tb19096.x
  2. G. Wötting and G. Ziegler, “Influence of Powder Properties and Processing Condictions on Microstructure and Mechanical Properteis of Sintered $Si_3N_4$,” Ceram. Int., 10 [1] 18-22 (1984) https://doi.org/10.1016/0272-8842(84)90018-X
  3. M. Mitomo and S. Uenosono, “Microstructural Development During Gas Pressure Sintering of a-Silicon Nitride,” J. Am. Ceram. Soc., 75 [1] 103-8 (1992) https://doi.org/10.1111/j.1151-2916.1992.tb05449.x
  4. S. K. Lee, K. S. Lee, and B. R. Lawn, “Effect of Starting Powder on Damage Resistance of Silicon Nitrides,” J. Am. Ceram. Soc., 81 [8] 2061-70 (1998) https://doi.org/10.1111/j.1151-2916.1998.tb02588.x
  5. S. K. Lee, J. D. Morreti, M. J. Readey, and B. R. Lawn, “Thermal Shock Resistance of Silicon Nitrides,” J. Am. Ceram. Soc., 85 [1] 279-81 (2002) https://doi.org/10.1111/j.1151-2916.2002.tb00083.x
  6. H. Huang, K. J. Winchester, A. Suvorova, B. R. Lawn, Y. Liu, X. Z. Hu, J. M. Dell, and L. Faraone, “Effect of Deposition Conditions on Mechanical Properties of Low-Temperature PECVD Silicon Nitride Films,” Mater. Sci. & Eng., A435-546 453-59 (2006) https://doi.org/10.1016/j.msea.2006.07.015
  7. W. Y. Park, D. S. Park, H. D. Kim, and B. D. Han, “Sintering and Mechanical Properties of Silicon Nitride Prepared with a Low-cost Silicon Nitride Powder(in Korean),” J. Kor. Ceram. Soc., 38 [11] 987-92 (2001)
  8. B. T. Lee and H. D. Kim, “Microstructure and Fracture Characteristic of Reaction-Sintered $Si_3N_4$ -TiN Composite(in Korean),” J. Kor. Ceram. Soc., 33 [6] 686-92 (1996)
  9. S. H. Cheon, I. S. Han, Y. H. Chung, D. W. Seo, S. Lee, K. S. Hong, and S. K. Woo, “Preparation and Properties of Silicon Nitride Ceramics by Nitrided Pressureless Sintering (NPS) Process(in Korean),” J. Kor. Ceram. Soc., 41 [12] 893-99 (2004) https://doi.org/10.4191/KCERS.2004.41.12.893
  10. I. S. Han, S. H. Cheon, Y. H. Jung, D. W. Seo, S. Lee, K. S. Hong, and S. K. Woo, “Oxidation Behavior of $Si_3N_4$ by the Nitrided Pressureless Sintering(in Korean),” J. Kor. Ceram. Soc., 42 [1] 62-8 (2005) https://doi.org/10.4191/KCERS.2005.42.1.062
  11. I. S. Han, D. W. Seo, S. Y. Kim, K. S. Hong, G. H. Guahk, and K. S. Lee “Properties of Silicon Nitride for Aluminum Melts Prepared by Nitrided Pressureless Sintering,” J. Eur. Ceram. Soc., 28 1057-63 (2008) https://doi.org/10.1016/j.jeurceramsoc.2007.09.032
  12. K. H. Guahk, I. S. Han, and K. S. Lee, “Strength Degradation from Hertzian Contact Damages in Nitrided Pressureless Sintered Silicon Nitride Ceramics,” Inter. J. Mod. Phys. B., 22 [9/11] 1819-26 (2008) https://doi.org/10.1142/S021797920804747X
  13. S. K. Woo, I. S. Han, G. G. Ri, S. C. Park, K. Cho, and B, K. Jang, “Hot Crrositon Behavior of Silicon Nitride-Bonded Silicon Carbide,” J. Ceram. Soc. Japan, 109 [1] 23-8 (2001) https://doi.org/10.2109/jcersj.109.23
  14. K. S. Lee, I. S. Han, D. W. Seo, and S. K. Woo, “Strength Degradation of Silicon Carbide Hot Gas Filter in the Simulated PFBC Condition,” Key Eng. Mater. 287 495-505 (2005) https://doi.org/10.4028/www.scientific.net/KEM.287.495
  15. B. R. Lawn, S. K. Lee, I. M. Peterson, and S. Wuttiphan, “Model of Strength Degradation from Hertzian Contact Damage in Tough Ceramics,” J. Am. Ceram. Soc., 81 [6] 1509-20 (1998) https://doi.org/10.1111/j.1151-2916.1998.tb02510.x
  16. B. R. Lawn, “Indentation of Ceramics with Spheres : A Century After Hertz,” J. Am. Ceram. Soc., 81 [8] 1977-94 (1998) https://doi.org/10.1111/j.1151-2916.1998.tb02580.x

피인용 문헌

  1. Optimization of Binder Burnout for Reaction Bonded Si3N4 Substrate Fabrication by Tape Casting Method vol.52, pp.6, 2015, https://doi.org/10.4191/kcers.2015.52.6.435
  2. Effects of Debinding Atmosphere on Properties of Sintered Reaction-bonded Si3N4 Prepared by Tape Casting Method vol.53, pp.6, 2016, https://doi.org/10.4191/kcers.2016.53.6.622