참고문헌
- S.-H. Hyun, “Present Status and Preparation Technology of Ceramic Membranes,” Membrane J., 3 [1] 1-11 (1993)
- H. Y. Ha, S. W. Nam, and S.-A. Hong, “Fabrication and Application of Inorganic Membranes,” Membrane J., 9 [2] 62-8 (1999)
- H. Takaba, K. Mizukami, M. Kubo, A. fahmi, and A. Miyamoto, “Permeation Dynamics of Small Molecules Silica Membranes: Molecular Dynamics Through Study,” AIChE Journal, 44 [6] 1335-43 (1998) https://doi.org/10.1002/aic.690440611
- Anil K. Prabhu and S. Ted Oyama, “Highly Hydrogen Selective Ceramic Membranes: Application to the Transformation of Greenhouse Gases,” J. Membrane Sci., 176 233-38 (2000) https://doi.org/10.1016/S0376-7388(00)00448-8
- G. Xomeritakis, S. Naik, C.M. Braunbarth, and C.J. Cornelius, “Organic-templated Silica Membranes I. Gas and Vapor Transport Properties,” J. Membrane Sci., 215 225-33 (2004) https://doi.org/10.1016/S0376-7388(02)00616-6
- T. M. Nenoff, R. J. Spontak, and C. M. Aberg, “Membranes for Hydrogen Purification: An Important Step Toward a Hydrogen-Based Economy,” MRS bull., 31 735-44 (2006) https://doi.org/10.1557/mrs2006.186
-
S. Lin and M. Harada, “
$CO_2$ Separation During Hydrocarbon Gasification,” Energy, 30 2186-93 (2005) https://doi.org/10.1016/j.energy.2004.08.022 -
S. Kurungot, T. Yamaguchi, and S.-i. Nakao, “
$Rh/{\gamma}-Al_2O_3$ Catalytic Layer Integrated with Sol-gel Synthesized Microporous Silica Membrane for Compact Membrane Reactor Applications,” Catal. Lett., 86 [4] 273-78 (2003) https://doi.org/10.1023/A:1022636606705 -
H. Uhlig, M. Frieβ, P. Lamparter, and S. Steeb, “Local Order of Polymer Derived Amorphous
$Si_xC_yN_z$ ,” J. Appl. Phys., 83 [11] 5714-18 (1998) https://doi.org/10.1063/1.367426 - A Data Sheet for the Si/C/N Precursor Polymer used in this Study is Available at: http://www.kioncorp.com/datasheets.html
- S. Brunauer, P. H. Emmet, and E. Teller, “Adsorption of Gases in Multimolecular Layers,” J. Am. Chem. Soc., 60 309-19 (1938) https://doi.org/10.1021/ja01269a023
- B. C. Lippens and J. H. de Boer, “Studies on Pore Systems in Catalysts V: The t Method,” J. Catal., 4 [3] 319-23 (1965) https://doi.org/10.1016/0021-9517(65)90307-6
- G. Horvath and K. Kawazoe, “Method for The Calculation of Effective Pore Size Distribution in Molecular Sieve Carbon,” J. Chem. Eng. Japan, 16 [6] 470-75 (1983) https://doi.org/10.1252/jcej.16.470
- H. Suda, H. Yamauchi, Y. Uchimaru, I. Fujiwara, and K. Haraya, “Preparation and Gas Permeation Properties of Silicon Carbide Based Inorganic Membranes for Hydrogen Separation,” Desalination, 193 252-55 (2006) https://doi.org/10.1016/j.desal.2005.04.143
- John P. Dismukes, Jack W. Johnson, John S. Bradley, and John M. Millar, “Chemical Synthesis of Microporous Nonoxide Ceramics from Polysilazanes,” Chem. Mater., 9 [3] 699-706 (1997) https://doi.org/10.1021/cm9603563
- Zhe Chen, K. Prasad, C.Y. Li, S.S. Su, D. Gui, P.W. Lu, X. He, and S. Balakumar, “Characterization and Performance of Dielectric Diffusion Barriers for Cu Metallization,” Thin Solid Films, 462-463 223-26 (2004) https://doi.org/10.1016/j.tsf.2004.05.036
- F. Bauer, U. Decker, A. Dierdorf, H. Ernst, R. Heller, H. Liebe, and R. Mehnert, “Preparation of Moisture Curable Polysilazane Coatings Part I. Elucidation of Low Temperature Curing Kinetics by FT-IR Spectroscopy,” Prog. Org. Coat., 53 [3] 183-90 (2005) https://doi.org/10.1016/j.porgcoat.2005.02.006
- J.H. Wang, P.T. Liu, T.S. Chang, T.C. Chang and L.J. Chen, “Structural Characteristics and Interfacial Reactions of Low Dielectric Constant Porous Polysilazane for Cu Metallization,” Thin Solid Films, 469-470 393-97 (2004) https://doi.org/10.1016/j.tsf.2004.09.014
- Z. Li, K. Kusakabe, and S. Morooka, “Preparation of Thermostable Amorphous Si-C-O Membrane and its Applicatino to Gas Separation at Elevated Temperature,” J. Membrane Sci., 118 159-68 (1996) https://doi.org/10.1016/0376-7388(96)00086-5
- Y. Iwamoto, K. Sato, T. Kato, T. Inada and Y. Kubo, “A Hydrogen -Permselective Amorphous Silica Membrane Derived from Polysilazane,” J. Eu. Ceram. Soc., 25 257-64 (2005) https://doi.org/10.1016/j.jeurceramsoc.2004.08.007
피인용 문헌
- Formation of Bioactive Ceramic Foams by Polymer Pyrolysis and Self-Blowing vol.48, pp.5, 2011, https://doi.org/10.4191/kcers.2011.48.5.412
- Effect of SiC Filler Content on Microstructure and Flexural Strength of Highly Porous SiC Ceramics Fabricated from Carbon-Filled Polysiloxane vol.49, pp.6, 2012, https://doi.org/10.4191/kcers.2012.49.6.625
- Flexural Strength of Polysiloxane-Derived Strontium-Doped SiOC Ceramics vol.52, pp.1, 2015, https://doi.org/10.4191/kcers.2015.52.1.61
- Effect of Alkaline-Earth Oxide Additives on Flexural Strength of Clay-Based Membrane Supports vol.52, pp.3, 2015, https://doi.org/10.4191/kcers.2015.52.3.180