대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제33권9호
  • /
  • Pages.878-885
  • /
  • 2009
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

크리로프 부공간법에 근거한 모델차수축소기법을 통한 배열형 MEMS 공진기의 주파수응답해석

Frequency Response Analysis of Array-Type MEMS Resonators by Model Order Reduction Using Krylov Subspace Method

  • 한정삼 (안동대학교 기계공학부) ;
  • 고진환 (서울대학교 기계항공공학부)
  • 발행 : 2009.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

One of important factors in designing MEMS resonators for RF filters is obtaining a desired frequency response function (FRF) within a specific frequency range of interest. Because various array-type MEMS resonators have been recently introduced to improve the filter characteristics such as bandwidth, pass-band, and shape factor, the degrees of freedom (DOF) of finite elements for their FRF calculation dramatically increases and therefore raises computational difficulties. In this paper the Krylov subspace-based model order reduction using moment-matching with non-zero expansion points is represented as a numerical solution to perform the frequency response analyses of those array-type MEMS resonators in an efficient way. By matching moments at a frequency around the specific operation range of the array-type resonators, the required FRF can be efficiently calculated regardless of their operating frequency from significantly reduced systems. In addition, because of the characteristics of the moment-matching method, a minimal order of reduced system with a prearranged accuracy can be determined through an error indicator using successive reduced models, which is very useful to automate the order reduction process and FRF calculation for structural optimization iterations. We also found out that the presented method could obtain the FRF of a $6\times6$ array-type resonator within a seventieth of the computational time necessary for the direct method and in addition FRF calculation by the mode superposition method could not even be completed because of a data overflow with a half after calculation of 9,722 eigenmodes.

키워드

참고문헌

  1. Varadan, V. K., Vinoy, K. J. and Jose, K. A., 2003, RF MEMS and their applications, John Wiley
  2. Nguyen, C. T. C., 2004, 'Vibrating RF MEMS for next generation wireless applications,' Custom Inte- grated Circuits Conference, Proceedings of the IEEE 2004, pp. 257~264
  3. Weinstein, D., Bhave, S. A., Tada, M., Mitarai, S., Morita, S. and Ikeda, K., 2007, 'Mechanical Coupling of 2D Resonator Arrays for MEMS Filter Applications,' IEEE International Frequency Control Symposium (FCS 2007), Geneva, Switzerland, pp. 1362~1365 https://doi.org/10.1109/FREQ.2007.4319299
  4. Xie, Y., Li, S. S., Lin, Y. W., Ren, Z. and Nguyen, C. T. C., 2003, 'UHF Micromechanical Extensional Wine-Glass Mode Ring Resonators, Technical Digest, IEEE International Electron Devices Meeting, Washington, DC, pp. 953~956
  5. Weinstein, D., Chandrahalim, H., Cheow, L. F. and Bhave, S.A., 2006, 'Dielectrically Transduced Single- Ended to Differential MEMS Filter,' IEEE International Solid-State Circuits Conference (ISSCC 2006), pp. 1236~1243 https://doi.org/10.1109/ISSCC.2006.1696170
  6. Han, J. S., 2006, 'Efficient Vibration Simulation Using Model Order Reduction,' Transactions of the KSME A, Vol. 30, No. 3, pp. 310~317 https://doi.org/10.3795/KSME-A.2006.30.3.310
  7. Han, J. S., 2007, 'Eigenvalue and Frequency Response Analyses of a Hard Disk Drive Actuator Using Reduced Finite Element Models,' Transactions of the KSME A, Vol. 31, No. 5, pp. 541~549 https://doi.org/10.3795/KSME-A.2007.31.5.541
  8. Rudnyi, E. and Korvink, J., 2006, 'Model Order Reduction for Large Scale Engineering Models Developed in ANSYS,' Lecture Notes in Computer Science, Vol. 3732, pp. 349~356 https://doi.org/10.1007/11558958_41
  9. Su, T. J. and Craig, Jr. R. R., 1991, 'Krylov Model Reduction Algorithm for Undamped Structural Dynamics Systems,' J. Guid. Control Dyn., Vol. 14, pp. 1311~ 1313 https://doi.org/10.2514/3.20789
  10. Freund, R. W., 2000, 'Krylov-Subspace Methods for Reduced-Order Modeling in Circuit Simulation,' J. Comput. Appl. Math., Vol. 123, pp. 395~421 https://doi.org/10.1016/S0377-0427(00)00396-4
  11. Han, J. S., Rudnyi, E. B. and Korvink, J. G., 2005, 'Efficient Optimization of Transient Dynamic Problems in MEMS Devices Using Model Order Reduction,' J. Micromech. Microeng., Vol. 15, pp. 822~832 https://doi.org/10.1088/0960-1317/15/4/021
  12. Salimbahrami, B., Lohmann, B. and Eid, R., 2006, 'Order Reduction of Second Order Systems with Proportional Damping,' Book of Abstracts for the Joint GAMM-SIAM Conference on Applied Linear Algebra, July 24-27, Dusseldorf, Germany, p. 168
  13. Bechtold, T., Rudnyi, E. B. and Korvink, J. G., 2005, 'Error Indicators for Fully Automatic Extraction of Heat-Transfer Macromodels for MEMS,' J. Micromech. Microeng., Vol. 15, pp. 1205~1214 https://doi.org/10.1088/0960-1317/15/6/010
  14. Choi, D., Kim, H. and Cho, M., 2007, 'Iterated Improved Reduced System (IIRS) Method Combined with Sub-Structuring Scheme (I),' Transactions of the KSME A, Vol. 31, No. 2, pp. 211~220 https://doi.org/10.3795/KSME-A.2007.31.2.211
  15. Choi, D., Kim, H. and Cho, M., 2007, 'Iterated Improved Reduced System (IIRS) Method Combined with Sub-Structuring Scheme (II),' Transactions of the KSME A, Vol. 31, No. 2, pp. 221~230 https://doi.org/10.3795/KSME-A.2007.31.2.221
  16. Ko, J. H., Jung, S. N., Byun, D. and Bai, Z., 2008, 'An Algebraic Substructuring Using Multiple Shifts for Eigenvalue Computations,' Journal of Mechanical Science and Technology, Vol. 22, pp. 440~449 https://doi.org/10.1007/s12206-007-1046-1
  17. Wilson, E. L., Yuan, M. W., and Dickens, J. M., 1982, 'Dynamic analysis by direct superposition of Ritz vectors,' Earthquake Engineering and Structural Dynamics, Vol. 10, pp. 813~821 https://doi.org/10.1002/eqe.4290100606
  18. Gu, J., Ma, Z. and Gregory, H., 2000, 'A new loaddependent Ritz vector method for structural dynamics analyses : quasi-static Ritz vectors,' Finite Elements in Analysis and Design, Vol. 36, pp. 261~278 https://doi.org/10.1016/S0168-874X(00)00036-6
  19. ANSYS, 2007, ANSYS Theory Reference 11.0, SAS IP, Inc

피인용 문헌

  1. Comparison of Projection-Based Model Order Reduction for Frequency Responses vol.38, pp.9, 2014, https://doi.org/10.3795/KSME-A.2014.38.9.933
  2. Efficient Modal Analysis of Prestressed Structures via Model Order Reduction vol.35, pp.10, 2011, https://doi.org/10.3795/KSME-A.2011.35.10.1211