References
- Giannakopoulos, A. E., Larsson, P.-L. and Vestergaard, R., 1994, 'Analysis of Vickers Indentation,' International Journal of Solids and Structures, Vol. 31, pp. 2679~2708 https://doi.org/10.1016/0020-7683(94)90225-9
- Larsson, P. -L., Giannakopoulos, A. E., Soderlund, E., Rowcliffe, D. J. and Vestergaard, R., 1996, 'Analysis of Berkovich Indentation,' International Journal of Solids and Structures, Vol. 33, pp. 221~248 https://doi.org/10.1016/0020-7683(95)00033-7
- Taljat, B., Zacharia, T. and Kosel, F., 1997, 'New Analytical Procedure to Determine Stress-Strain Curve from Spherical Indentation Data,' International Journal of Solids and Structures, Vol. 35, pp. 4411~4426 https://doi.org/10.1016/S0020-7683(97)00249-7
- Giannakopoulos, A. E. and Suresh, S., 1999, 'Determination of Elastoplastic Properties by Instrumented Sharp Indentation,' Scripta Materialia, Vol. 40, pp. 1191~1198 https://doi.org/10.1016/S1359-6462(99)00011-1
- Dao, M., Chollacoop, N., Van Vliet, K. J., Venkatesh, T. A. and Suresh, S., 2001, 'Computational Modeling of the Forward and Reverse Problems in Instrumented Sharp Indentation,' Acta Materialia, Vol. 49, pp. 3899~3918 https://doi.org/10.1016/S1359-6454(01)00295-6
- Lee, J. H. and Lee, H., 2006, 'An Indentation Method Based on FEA for Equi-biaxial Residual Stress Evaluation,' Transactions of KSME, Vol. 30, No. 1, pp. 42~51 https://doi.org/10.3795/KSME-A.2006.30.1.042
- Lee, J. H., 2006, A Numerical Approach and Experimental Verification of the Indentation Techniques for Material Property and Residual Stress Evaluation, Ph. D. Dissertation, Department of Mechanical Engineering, Sogang University
- Shim, S., Oliver, W. C. and Pharr, G. M., 2007, 'A Comparison of 3D Finite Element Simulation for Berkovich and Conical Indentation of Fused Silica,' International Journal of Surface Science and Engineering, Vol. 1, pp. 259~273 https://doi.org/10.1504/IJSURFSE.2007.015028
- Lee, J. H., Yu, H. S. and Lee, H., 2007, 'A Numerical Approach to Indentation Techniques for Thin-film Property Evaluation,' Transactions of KSME, Vol. 31, No. 3, pp. 313~321 https://doi.org/10.3795/KSME-A.2007.31.3.313
- Xu, Z. -H. and Li, X., 2008, 'Effect of Indenter Geometry and Material Properties on the Correction Factor of Sneddon's Relationship for Nanoindentation of Elastic-plastic Materials,' Acta Materialia, Vol. 56, pp. 1399~1405 https://doi.org/10.1016/j.actamat.2007.11.030
- Lee, J. H., Lee, H. and Pharr, G. M., 2005, 'A Numerical Approach to Spherical Indentation Tech-niques for Material Property Evaluation,' Journal of the Mechanics and Physics Solid, Vol. 53, pp. 2037~ 2069 https://doi.org/10.1016/j.jmps.2005.04.007
- Lee, J. H. and Lee, H., 2007, 'Enhanced Spherical Indentation Techniques for Property Evaluation,' Transactions of KSME, Vol. 31, No. 43, pp. 461~471 https://doi.org/10.3795/KSME-A.2007.31.4.461
- Cheng, Y. T. and Cheng, C. M., 1998, 'Scaling Approach to Conical Indentation in Elasto-plastic Solids with Work Hardening,' Journal of Applied Physics, Vol. 84, pp. 1284~1291 https://doi.org/10.1063/1.368196
- Capehart, T. W., Cheng, Y. -T., 2003, 'Determination Constitutive Models from Conical Indentation: Sensitivity Analysis,' Journal of Materials Research, Vol. 18, pp. 827~832 https://doi.org/10.1557/JMR.2003.0113
- Tho, K. K., Swaddiwudhipong, S., Liu, Z. S., Zeng, K., Hua, J., 2004, 'Uniqueness of Reverse Analysis from Conical Indentation Test,' Journal of Materials Research, Vol. 19, pp. 2498~2502 https://doi.org/10.1557/JMR.2004.0306
- Chen, X., Ogasawara, N., Zhao, M. and Chiba, N., 2007, 'On the Uniqueness of Measuring Elastoplastic Properties from Indentation: The Indistinguishable Mystical Materials,' Journal of the Mechanics and Physics Solid, Vol. 55, pp. 1618 ~ 1660 https://doi.org/10.1016/j.jmps.2007.01.010
- Lee, J. H., Lee, H. and Kim, D. H., 2008, 'A Numerical Approach to Elastic Modulus Evaluation Using Conical Indenter with Finite Tip Radius,' Journal of Materials Research, Vol. 23, No.1, pp. 2528~2537 https://doi.org/10.1557/jmr.2008.0314
- Chollacoop, N., Dao, M. and Suresh, S., 2003, 'Depth-sensing Instrumented Indentation with Dual Sharp Indenters,' Acta Materialia, Vol. 51, pp. 3713~ 3729 https://doi.org/10.1016/S1359-6454(03)00186-1
- Bucaille, J. L., Stauss, S., Felder, E. and Michler, J., 2003, 'Determination of Plastic Properties of Metals by Instrumented Indentation Using Different Sharp Indenters,' Acta Materialia, Vol. 51, pp. 1663~1678 https://doi.org/10.1016/S1359-6454(02)00568-2
- ABAQUS User's Manual, 2005, Version 6.5, Hibbitt, Karlsson and Sorensen, Inc., Pawtucket, RI
- Sneddon, I. N., 1965, 'The Relation between Load and Penetration in the Axisymmetric Boussinesq Problem for a Punch of Arbitrary Profile,' International Journal of Engineering Science, Vol. 3, pp. 47~57 https://doi.org/10.1016/0020-7225(65)90019-4
- Pharr, G. M., Oliver, W. C. and Brotzen, F. R., 1992, 'On the Generality of the Relationship among Contact Stiffness, Contact Area and Elastic Modulus during Indentation,' Journal of Material Research, Vol. 7, pp. 613~617 https://doi.org/10.1557/JMR.1992.0613
- Rice, J. R. and Rosengren, G. F., 1968, 'Plane Strain Deformation Near a Crack-tip in a Power Law Hardening Material,' Journal of the Mechanics and Physics of Solids, Vol. 16, pp. 1~12 https://doi.org/10.1016/0022-5096(68)90013-6
- Hyun, H. C., Lee, J. H. and Lee, H., 2008, 'Mathematical Expressions for Stress-strain Curve of Metallic Material,' Transactions of KSME, Vol. 32, No. 1, pp. 21~28 https://doi.org/10.3795/KSME-A.2008.32.1.021
Cited by
- A Dual Triangular Pyramidal Indentation Technique Based on FEA Solutions for Material Property Evaluation vol.36, pp.1, 2012, https://doi.org/10.3795/KSME-A.2012.36.1.017