Pressure Contact Interconnection for High Reliability Medium Power Integrated Power Electronic Modules

  • Yang, Xu (State Key Lab. of Electrical Insulation and Power Equipment, Xi'an Jiaotong University) ;
  • Chen, Wenjie (State Key Lab. of Electrical Insulation and Power Equipment, Xi'an Jiaotong University) ;
  • He, Xiaoyu (State Key Lab. of Electrical Insulation and Power Equipment, Xi'an Jiaotong University) ;
  • Zeng, Xiangjun (State Key Lab. of Electrical Insulation and Power Equipment, Xi'an Jiaotong University) ;
  • Wang, Zhaoan (State Key Lab. of Electrical Insulation and Power Equipment, Xi'an Jiaotong University)
  • Published : 2009.06.20

Abstract

This paper presents a novel spring pressure contact interconnect technique for medium power integrated power electronics modules (IPEMs). The key technology of this interconnection is a spring which is made from Be-Cu alloy. By means of the string pressure contact, sufficient press-contact force and good electrical interconnection can be achieved. Another important advantage is that the spring exhibits excellent performance in enduring thermo-mechanical stress. In terms of manufacture procedure, it is also comparatively simple. A 4 kW half-bridge power inverter module is fabricated to demonstrate the performance of the proposed pressure contact technique. Electrical, thermal and mechanical test results of the packaged device are reported. The results of both the simulation and experiment have proven that a good performance can be achieved by the proposed pressure contact technique for the medium power IPEMs.

Keywords

References

  1. Chow E.M., Chua C., et al. "Pressure Contact Micro-Springs in Small Pitch Flip-Chip Packages," IEEE Transactions on Components and Packaging Technologie, Vol. 29, pp.796 803,2006 https://doi.org/10.1109/TCAPT.2006.885959
  2. Karnezos M., Pendse R.D., et al. "Reliability of area array pressure contacts on the DTAB package," IEEE Transactions on Components, Packaging, and Manufacturing Technology, Part A, Vol.17, pp.263 269, 1994 https://doi.org/10.1109/95.296408
  3. Beale, J. and Pease R.F. "Limits of high-density, low-force pressure contacts," IEEE Transactions on Components, Packaging, and Manufacturing Technology, Part A, Vol.14, pp.257 262, 1994
  4. Woo-Jin, Lee, Seong-Wook, et aI "A New PWM-Controlled Quasi-Resonant Converter for a High Efficiency PDP Sustaining Power Module," Journal of Power Electronics, Vol. 7, No. 1, pp.28-37, 2007
  5. Soon Kurl Kwon, Khairy F. A. Sayed, "Boost-Half Bridge Single Power Stage PWM DC-DC Converters for PEM-Fuel Cell Stacks," Journal of Power Electronics, Vol. 8, No.3, pp.239-247, 2008
  6. Hang-Seok Choi, "Design Consideration of Half-Bridge LLC Resonant Converter," Journal of Power Electronics, Vol. 7, No.1, pp.13-20, 2007
  7. Sung-Sae Lee, Sang-Kyoo Han, et aI., "A New High Efficiency Half Bridge Converter with Improved ZVS Performance," Journal of Power Electronics, Vol. 6, No.3, pp.187-194,2006
  8. Fisher R., Fillion R., Burgess J., and Hennessy W., "High Frequency, Low Cost, Power Packaging Using Thin Film Power Overlay Technology," in Proc. of IEEE Applied Power Electronics Conference, pp. 12-17, 1995
  9. Xingsheng Liu, Xiukuan Jing, and Guo-Quan Lu, "Chip-scale Packaging of Power Devices and its Application in Intcgrated Power Electronics Module," in Proc. of iEEE Ecrc Conference, pp. 290-296, 2000
  10. S. Wen, et aI, "Dimple-Array Interconnect Technique for Packaging Power Semiconductor Devices and Modules," in Proc. of Intemational Symposium on Power Devices and ICs, pp. 69-74, 2001
  11. Z.X. Liang, F. C. Lee, G-Q. Lu, and D. Borojevic, "Embedded Power -a multilayer integration teclmology for packaging of IPEMs and PEBBs", in Proc. of Internatioal Worshop on Integrated Power Packaging, pp.41-45, 2000
  12. Leferink, F.B.J., "Inductance calculations: methods and equations", in Proc. of IEEE International Symposium Electromagnetic Compatibility, USA, pp. 16-22, 1995
  13. Ruehli, A., Paul, C., Garrett, J., "Inductance calculations using partial inductances and macromodels," in Proc. of [EEE International Symposium Electromagnetic Compatibility, pp. 23-28, 1995