Abstract
Differently from fly ash, the bottom ash produced from thermoelectric power plant has been treated as an industrial waste matter, and almost reclaimed a tract from the sea. If this waste material is applicable to foam concrete as an aggregate owing to its light-weight, however, it may be worthy of environmental preservation by recycling of waste material as well as reducing self-weight of high-rising structure and horizontal forces and deformations of retaining wall subject to soil pressure. This study has an objective of evaluating the effects of application of bottom ash on the mechanical properties of foam concrete. Thus, the ratio of bottom ash to cement was selected as a variable for experiment and the effect was measured in terms of unit weight of concrete, air content, water-cement ratio and compressive strength. It can be observed from experiments that the application ratios have different effects on the material parameters considered in this experiment, thus major relationships between application ratio and each material parameter were finally introduced. The result of this study can be applied to decide a mix design proportion of foam concrete while bottom ash is used as an aggregate of the concrete.
Bottom ash는 플라이애쉬와 달리 거의 대부분이 산업폐기물로 분류되어 화력발전소 회사장에 매립처리 되고 있으나, 그 자체가 갖고 있는 경량성을 이용하여 기포콘크리트의 골재로 활용한다면 중량 감소에 따른 지반침하저감 및 구조물에 작용하는 측방 유동압 및 토압을 저감할 수 있을 뿐만 아니라 부산자원으로 재활용함으로써 환경보호 및 경제적 자원으로 가치창조할수 있을 것으로 기대된다. 따라서 본 연구에서는 bottom ash 적용에 따른 기포콘크리트의 역학적 특성을 파악하기 위하여 그 적용비율을 변수로 하여 단위용적질량, 공기량, 물-시멘트비 등의 변화, 소요 시멘트량의 특성을 실험을 통해 검토하였으며, 이들이 압축강도에 미치는 영향에 대해서도 평가하였다. 실험결과를 분석한 결과, bottom ash의 적용은 그 적용 비율에 따라 단위용적질량, 공기량, 물-시멘트비, 압축강도에 미치는 영향의 정도가 다르게 나타났으며, 이를 토대로 각 인자별 주요 상관관계를 도출하였다. 또한, 본 연구의 결과를 통해 bottom ash를 경량콘크리트의 골재로 활용할 경우 시공시 필요로 하는 조건에 부합할 수 있는 배합비 선정 안을 제안하였다.