DOI QR코드

DOI QR Code

Validation study on numerical simulation of RC response to close-in blast with a fully coupled model

  • Gong, Shunfeng (Institute of Structural Engineering, College of Civil Engineering and Architectural) ;
  • Lu, Yong (Institute for Infrastructure and Environment, School of Engineering, University of Edinburgh) ;
  • Tu, Zhenguo (Institute for Infrastructure and Environment, School of Engineering, University of Edinburgh) ;
  • Jin, Weiliang (Institute of Structural Engineering, College of Civil Engineering and Architectural, Zhejiang Univ.)
  • 투고 : 2008.11.25
  • 심사 : 2009.03.19
  • 발행 : 2009.05.30

초록

The characteristic response of a structure to blast load may be divided into two distinctive phases, namely the direct blast response during which the shock wave effect and localized damage take place, and the post-blast phase whereby progressive collapse may occur. A reliable post-blast analysis depends on a sound understanding of the direct blast effect. Because of the complex loading environment and the stress wave effects, the analysis on the direct effect often necessitates a high fidelity numerical model with coupled fluid (air) and solid subdomains. In such a modelling framework, an appropriate representation of the blast load and the high nonlinearity of the material response is a key to a reliable outcome. This paper presents a series of calibration study on these two important modelling considerations in a coupled Eulerian-Lagrangian framework using a hydrocode. The calibration of the simulated blast load is carried out for both free air and internal explosions. The simulation of the extreme dynamic response of concrete components is achieved using an advanced concrete damage model in conjunction with an element erosion scheme. Validation simulations are conducted for two representative scenarios; one involves a concrete slab under internal blast, and the other with a RC column under air blast, with a particular focus on the simulation sensitivity to the mesh size and the erosion criterion.

키워드

참고문헌

  1. AUTODYN (2001), v4.2 manual, Century Dynamics, Inc
  2. Baker, W.E. (1973), Explosions in Air, University of Texas Press, Austin, TX
  3. Brinkman, J.R. (1987), 'Separating shock wave and gas expansion breakage mechanisms', Proceeding of the Second International Symposium on Rock Fragmentation by Blasting, Colorado, Keystone, 6-15
  4. CEB-FIP (1993), Comite Euro-International du Beton, CEB-FIP Model Code 1990. Redwood Books, Trowbridge, Wiltshire, UK
  5. Gatuingt, F. and Pijaudier-Cabot, G. (2002), 'Coupled damage and plasticity modeling in transient dynamic analysis of concrete', Int. J. Numer. Anal. Meth. Geomech., 26, 1-24 https://doi.org/10.1002/nag.188
  6. Gebbeken, N. and Ruppert, M. (2000), 'A new material model for concrete in high-dynamic hydrocode simulations', Arch. of Appl. Mech., 70, 463-478 https://doi.org/10.1007/s004190000079
  7. Gebbeken, N. and Ruppert, M. (1999), 'On the safety and reliability of high dynamic hydrocode simulations', Int. J. Numer. Meth. Eng., 46, 839-851 https://doi.org/10.1002/(SICI)1097-0207(19991030)46:6<839::AID-NME728>3.0.CO;2-R
  8. Gong, S. and Lu, Y. (2007), 'Combined continua and lumped parameter modelling for nonlinear response of structural frames to impulsive ground shock', J. Eng. Mech., ASCE, 133(11), 1229-1240 https://doi.org/10.1061/(ASCE)0733-9399(2007)133:11(1229)
  9. Henrych, J. (1979), The Dynamics of Explosion and Its Use, Elsevier Scientific Publishing Company, New York
  10. Holmquist, T.J., Johnson, G.R. and Cook, W.H. (1993), 'A computational constitutive model for concrete subjected to large strain, high strain rates and high pressures', 14th International Symposium on Ballistics, Quebec, Canada, 591-600
  11. Hommert, P.J., Kuszmaul, J.S. and Parrish, R.L. (1987), 'Computational and experimental studies of the role of stemming in cratering', Proceeding of the Second International Symposium on Rock Fragmentation by Blasting, Colorado, Keystone, 550-562
  12. Krauthammer, T., Frye, M., Schoedel, T.R. and Seltzer, M. (2003), 'Advanced SDOF approach for structural concrete systems under blast and impact loads', 11th Int. Sym. on the Interaction of the Effects of Munitions with Structures, Mannheim, Germany
  13. Lee, E.L., Hornig, H.C. and Kury, J.W. (1968), 'Adiabatic expansion of high explosive detonation products', UCRL-50422, Lawrence Radiation Laboratory, University of California
  14. Leppanen, J. (2006), 'Concrete subjected to projectile and fragment impacts: Modelling of crack softening and strain rate dependency in tension', Int. J. Impact Eng., 32, 1828-1841 https://doi.org/10.1016/j.ijimpeng.2005.06.005
  15. Lim, H.S. and Weerheijm, J. (2006), 'Breakup of concrete slab under internal explosion', 32nd DoD Explosives Safety Seminar, Philadelphia, PA
  16. LS-DYNA (2003), Keyword User’s Manual, Version 970. Livermore Software Technology Corporation
  17. Malvar, L.J., Crawford, J.E. and Morrill, K.B. (2000), 'K&C concrete material model Release III—Automated generation of material model input', K&C Technical Report TR-99-24-B1
  18. Malvar, L.J. (1998), 'Review of static and dynamic properties of steel reinforcing bars', ACI Mater. J., 95(5), 609-616
  19. Malvar, L.J., Crawford, J.E., Wesevich, J.W. and Simons, D. (1997), 'A plasticity concrete material model for DYNA3D', Int. J. Impact Eng., 19(9-10), 847-873 https://doi.org/10.1016/S0734-743X(97)00023-7
  20. Rabczuk, T. and Eibl, J. (2006), 'Modelling dynamic failure of concrete with meshfree methods', Int. J. Impact Eng., 32, 1878-1897 https://doi.org/10.1016/j.ijimpeng.2005.02.008
  21. TM5-1300 (1990), Structures to Resists the Effects of Accidental Explosions. Department of the Army. USA
  22. Tu, Z. and Lu, Y. (2009), 'Evaluation of typical concrete material models used in hydrocodes for high dynamic response simulations', Int. J. Impact Eng., 36, 132-146 https://doi.org/10.1016/j.ijimpeng.2007.12.010
  23. Xu, K. and Lu, Y. (2006), 'Numerical simulation study of spallation in reinforced concrete plates subjected to blast loading', Comput. Struct., 84(5-6), 431-438 https://doi.org/10.1016/j.compstruc.2005.09.029

피인용 문헌

  1. Nonlinear analysis of 3D reinforced concrete frames: effect of section torsion on the global response vol.36, pp.4, 2010, https://doi.org/10.12989/sem.2010.36.4.421
  2. Dynamic response of a reinforced concrete slab subjected to air blast load vol.56, pp.3, 2011, https://doi.org/10.1016/j.tafmec.2011.11.002
  3. Damage prediction of RC containment shell under impact and blast loading vol.36, pp.6, 2010, https://doi.org/10.12989/sem.2010.36.6.729
  4. Identification of progressive collapse pushover based on a kinetic energy criterion vol.39, pp.3, 2009, https://doi.org/10.12989/sem.2011.39.3.427
  5. Numerical analysis of reaction forces in blast resistant gates vol.63, pp.3, 2009, https://doi.org/10.12989/sem.2017.63.3.347