References
- Yokota, K., Kuwahara,K., Kataoka, D., Tsujimoto, Y., and Acosta, A., 1999, A Study of Swirling Backflow and VortexStructure at the Inlet of an Inducer, JSME International Journal, Ser.B, Vol.42, No.3, pp. 451-459.
- Yokota, K., Mitsuda, K., Tsujimoto, Y, and Kato, C., “A Study of Vortex Structure in the Shear Layer between Main Flow andSwirling Backflow, 2004, JSME International Journal, Ser. B., Vol.47, No.3, pp. 541-548. https://doi.org/10.1299/jsmeb.47.541
- Milne-Thomson, Theoretical Hydrodynamics, 5th Ed., Macmillan & Co Ltd.
- Yamamoto, K., 1990, Instability in a Cavitating Centrifugal Pump (1st Report, Classification of Instability Phenomena &Vibration Characteristics), Trans. JSME (in Japanese), Ser.B, Vol.56, No.523, pp. 82-89.
- Yamamoto, K., 1990, Instability in a Cavitating Centrifugal Pump (2nd Report, Delivery of Mechanical Energy duringOscillation), Trans. JSME (in Japanese), Ser.B, Vol.56, No.523, pp. 90-96.
- Yamamoto, K., 1990, Instability in a Cavitating Centrifugal Pump (3rd Report, Mechanism of Low-Cycle System Oscillation),Trans. JSME (in Japanese), Ser.B, Vol.58, No.545, pp. 180-186.
- Tsujimoto,Y., Kamijo, K., and Brennen, C.E., 2001, Unified Treatment of Instabilities in Turbomachines, AIAA Journal ofPropulsion and Power, Vol.17, No.3, pp. 636-643. https://doi.org/10.2514/2.5790
- Brennen, C.E., and Acosta, A.J., 1976, The Dynamic Transfer Function for a Cavitating Inducer, ASME Journal of FluidsEngineering, Vol.78, No.2, pp. 182-191.
- Qiao, X., Horiguchi, H., and Tsujimoto, Y., 2007, Response of Backflow to Flow Rate Fluctuations, ASME Journal of FluidsEngineering, Vol.129, No.1, pp. 350-357. https://doi.org/10.1115/1.2427081
- Yamanishi, N., Fukao, S., Qiao, X., Kato, C., and Tsujimoto, Y., 2007, LES Simulation of Backflow Vortex Structure at theInlet of an Inducer, ASME Journal of Fluids Engineering, Vol.129, No. 2, pp. 587-594. https://doi.org/10.1115/1.2717613
- Qiao,X., Horiguchi, H., Kato, C., and Tsujimoto, Y., 2001, Numerical Study of Backflow at the Inlet of Inducers, Proceedingsof the 3rd Int. Symp. On Fluid Machinery and Fluid Engineering, Beijing, China, A-1, pp. 1-11.
Cited by
- Numerical prediction of impacts of cavitation in pumps for power generation vol.62, pp.6, 2015, https://doi.org/10.1134/S0040601515060087
- Investigation on the influence of jetting equipment on the characteristics of centrifugal pump vol.8, pp.8, 2016, https://doi.org/10.1177/1687814016660287
- Numerical Analysis of Unsteady Cavitating Flow around Balancing Drum of Multistage Pump vol.9, pp.2, 2016, https://doi.org/10.5293/IJFMS.2016.9.2.119
- Effects of inducer tip clearance on the performance and flow characteristics of a pump in a turbopump vol.231, pp.5, 2017, https://doi.org/10.1177/0957650917707656
- Analytical Study of Cavitation Surge in a Hydraulic System vol.136, pp.10, 2014, https://doi.org/10.1115/1.4027220
- Numerical and experimental research on unsteady cavitating flow around NACA 2412 hydrofoil vol.72, pp.2, 2015, https://doi.org/10.1088/1757-899X/72/2/022014
- Visualizations of Flow Structures in the Rotor Passage of an Axial Compressor at the Onset of Stall vol.139, pp.4, 2017, https://doi.org/10.1115/1.4035076