DOI QR코드

DOI QR Code

Practicalities of structural health monitoring

  • Shrive, P.L. (Halcrow Yolles) ;
  • Brown, T.G. (Dept. of Civil Engineering, Univ. of Calgary) ;
  • Shrive, N.G. (Dept. of Civil Engineering, Univ. of Calgary)
  • 투고 : 2008.08.25
  • 심사 : 2008.09.21
  • 발행 : 2009.07.25

초록

Structural Health Monitoring (SHM), particularly remote monitoring, is an emerging field with great potential to help infrastructure owners obtain more and up-to-date knowledge of their structures. The methodology could provide supplemental information to guide the frequency and extent of visual inspections, and the possible need for maintenance. The instrumentation for a SHM system needs to be developed with longevity and the objectives for the system in mind. Sensors need to be selected for reliability and durability, sited where they provide the maximum information for the objectives, and where they can be accessed and replaced should the need arise over the monitoring period. With the rapid changes now occurring with sensors and software, flexibility needs to be in place to allow the system to be upgraded over time. Damage detection needs to be considered in terms of the type of damage that needs to be detected, informing maintenance requirements, and how detection can be achieved. Current vibration analysis techniques appear not yet to have achieved the necessary sensitivity for that purpose. Societal factors will influence the design of a SHM system in terms of the sophistication of the instrumentation and methodology employed.

키워드

참고문헌

  1. Aktan, A.E., Catbas, F.N., Grimmelsman, K.A. and Tsikos, C.J. (2000), "Issues in infrastructure health monitoring for management", J. Eng. Mech. ASCE, 126(7), 711-724. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:7(711)
  2. Brown, T.G. (2007), "Ice force monitoring", Proc., Confederation Bridge Engineering Summit, Charlottetown, Ice 1-1 to Ice 1-11.
  3. Casas, J.R. and Aparicio, A.C. (1994), "Structural damage identification from dynamic-test data", J. Struct. Eng. ASCE, 120(8), 2437-2449. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:8(2437)
  4. Chen, H.L., Spyrakos, C.C. and Venkatesh, G. (1995), "Evaluating structural deterioration by dynamic response", J. Struct. Eng. ASCE, 121(8), 1197-1204. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:8(1197)
  5. Damson, E. (2001), Personal Communication (Damson was senior research technician in the Department of Civil Engineering, University of Calgary, for many years).
  6. Farinelli, A., Rogers, A. and Jennings, N. (2008), "Maximising sensor network efficiency through agent-based coordination of sense/sleep schedules", Proc. of the Workshop on Energy in Wireless Sensor Networks in conjunction with the Int. Conf. on Distributed Computing in Sensor Systems (DCOSS 2008), Santorini, Greece, 8pp.
  7. Hjelmstadt, K.D. and Shin, S. (1997), "Damage detection and assessment of structures from static response", J. Eng. Mech. ASCE, 123(6), 568-576. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:6(568)
  8. Housner, G.W., Bergman, L.A., Caughey, T.K., Chassiakos, A.G., Claus, R.O., Masri, S.F., Skelton, R.E., Soong, T.T., Spencer, B.F. and Yao, J.T.P. (1997), "Structural control: past, present, and future", J. Eng. Mech. ASCE, 123(9), 897-971. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:9(897)
  9. Humar, J., Bagchi, A. and Xu, H. (2006), "Performance of vibration based techniques for the identification of structural damage", Struct. Health Monit., 5, 215-241. https://doi.org/10.1177/1475921706067738
  10. Khattak, N.A. and Cheng, J.J.R. (2002), "Non-destructive evaluation of single, medium span concrete bridges", Proc. of the 6th Int. Conf. on Short and Medium Span Bridges, CSCE, Vancouver, Canada, 1295-1302.
  11. Park, S., Kim, Y.B. and Stubbs, N. (2002), "Non-destructive damage detection in large structures via vibration monitoring", Electronic J. Struct. Eng., 2, 59-75.
  12. Paulson, P.O. (1999), "Practical continuous acoustic monitoring of suspension bridge cables", 78th Annual Meeting of the Transportation Research Board, January, Washington DC, 12 pp.
  13. Rahman, A. and Hussain, S. (2007), "Uniformity and efficiency of a wireless sensor Network's coverage", Proc. of the IEEE 21st Int. Conf. on Advanced Networking and Applications (AINA '07), Niagara Falls, Canada, 506- 510.
  14. Shi, Z.Y., Law, S.S. and Zhang, L.M. (2000), "Optimum sensor placement for structural damage detection", J. Eng. Mech. ASCE, 126(11), 1173-1179. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:11(1173)
  15. Shrive, P.L., Brown, T.G., Newhook, J.P., Kroman, J., Tadros, G. and Shrive, N.G. (2008), "Initial performance of the lower deck, centre street bridge, calgary", Can. J. Civil Eng., in press.
  16. Shrive, P.L., Newhook, J.P., Brown, T.G., Shrive, N.G., Tadros, G. and Kroman, J. (2002), "Centre street bridge innovative deck slab", Proc. of the Annual CSCE Conf., Montreal, Quebec, June, 9 pp on CD.
  17. Shrive, P.L., Newhook, J.P., Brown, T.G., Shrive, N.G., Tadros, G. and Kroman, J. (2003), "Thermal strains in steel and glass fibre reinforced polymer reinforcement in a bridge deck", Proc. of Int. Conf. on the Performance of Construction Materials, Cairo, Egypt, February, 429-437.
  18. Sikorsky, C. (2000), "Development of a health monitoring system for civil structures using a level iv nondestructive evaluation method", Keynote Presentation, Engineering Service Center, MS #9, California Department of transportation, Sacramento, California, 68-81.
  19. Spuler, T., Moor, G. and O'Suilleabhain, C. (2008), Remote monitoring: cost-effective and self-sufficient, Tailor Made Concrete Structures, Walraven and Stoelhorst (eds), Taylor and Francis Group, London, 237-242.
  20. Tozser, O. and Elliott, J. (2000), "Continuous acoustic monitoring of prestressed structures", 3rd Structural Specialty Conf. of the Canadian Society of Civil Engineering, Regina, Saskatchewan, 6pp.
  21. Zhou, Z., Wegner, L.D. and Sparling, B.F. (2002), "Assessing damage to a bridge deck using measured dynamic characteristics - influence of the number of measurement points", Proc. of the 6th Int. Conf. on Short and Medium Span Bridges, CSCE, Vancouver, Canada, 65-72.

피인용 문헌

  1. Field application of smart SHM using field programmable gate array technology to monitor an RC bridge in New Mexico vol.20, pp.8, 2011, https://doi.org/10.1088/0964-1726/20/8/085005
  2. Measurements of dielectric constants of soil to develop a landslide prediction system vol.7, pp.4, 2009, https://doi.org/10.12989/sss.2011.7.4.319
  3. Integrated fuzzy decision approach for reliability improvement of dam instrumentation and monitoring vol.3, pp.2, 2009, https://doi.org/10.1080/24705314.2018.1461546